ANKER PowerCore 13000 2 Port Ultra Portable Phone Charger User Guide
- June 13, 2024
- Anker
Table of Contents
**ANKER PowerCore 13000 2 Port Ultra Portable Phone Charger User Guide
**
Using Your Power Core
Wei Resilient Power Core reverend
Check the power level
Charge your phone or tablet
Ihr Handy oder Tablet laden
*No Lightning cable included.
Recharge your Power Core
Ihren Power Core laden
When your Power Core is fully charged, the LED indicators will turn off.
**To give your Power Core the fastest, safest recharge, use an Anker® USB charger
**
Specifications
Cell Capacity | 13000 mAh / 47.19 Wh |
---|---|
Input | 5 V 2 A |
Output | 5 V 3 A |
Size | 97 × 80 × 22 mm / 3.8 × 3.1 × 0.9 in |
Weight | 240 g / 8.5 oz |
Nbote: Rated capacity is the minimum charge capacity after factoring energy loss while charging. Based on standard laboratory conditions, our rated capacity is more than 60% of total cell capacity, which is higher than average.
IMPORTANT SAFETY INSTRUCTIONS
- When using this product, basic precautions should always be followed, including the following:
- Read all the instructions before using the product.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product.
- Do not expose power bank to rain or snow.
- Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
- Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
- Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Switch o the power bank when not in use.
SAVE THESE INSTRUCTIONS
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica
For FAQs and more information, please visit:
@Anker
@Anker Japan
@Anker Deutschland
@Anker Official
@Anker -JP
@Anker
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730,
US
Telephone: +1 (909) 484 1530
This device complies with Industry Canada license‐ICES-003. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS(when product contain battery)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1215 is in
compliance with Directive 2014/30/EU & 2011/65/EU & 2001/95/EC
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3-5, 80807 Munich, Germany
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1215 is in
compliance with following Directives: Electromagnetic Compatibility
Regulations 2016, The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic
Equipment Regulations 2012. The full text of the GB declaration of
conformity is available at the following internet address:
https://www.anker.com
Attention
**To preserve battery lifespan, use and recharge at least once every 4 months
Use original or certified cables
Do not expose to liquids
Do not disassemble
Avoid dropping
Avoid extreme temperatures**
Customer Service
**
18-month limited warranty
Lifetime technical support**
support@anker.com
1-800-988-7973 | Mon-Fri 9:00-5:00 PST
(US)