AURATON 20200218 Flood Sensor Valve Owner’s Manual

: June 13, 2024
: AURATON

Table of Contents

AURATON 20200218 Flood Sensor Valve
Product Information
Product Usage Instructions
Technical specifications
Documents / Resources

AURATON 20200218 Flood Sensor Valve

Product Information

Product Name: Auraton Flood Sensor Valve
Model : Auraton Flood Sensor Valve
Version : 20200218

Description : Auraton Flood Sensor Valve is an emergency cut-offvalve, which cuts off water supply after detecting flooding in the controlled area. The device is able to close the water flow in the circuit when flooding is detected by the Auraton Flood Sensor. For proper operation of the system, one Auraton Flood Sensor Valve and at least one flood Auraton Flood Sensor are required (up to 10 sensors).
Manufacturer : LARS Andrzej Szymaski
Address : Swierkowa 14, 64-320 Niepruszewo, POLAND
Website : https://manuals.auraton.pl

Product Usage Instructions

Ensure that you have one Auraton Flood Sensor Valve and at least one flood Auraton Flood Sensor.
Install the Auraton Flood Sensor Valve in the water supply circuit.
Connect the Auraton Flood Sensor Valve to the flood Auraton Flood Sensor(s) using the provided instructions.
Place the flood Auraton Flood Sensor(s) in the controlled area where flooding may occur.
Ensure that the power supply to the Auraton Flood Sensor Valve is connected and functioning properly.
When flooding is detected by the flood Auraton Flood Sensor, the Auraton Flood Sensor Valve will automatically close the water flow in the circuit to prevent further flooding.
To dispose of the product, follow the guidelines provided by the manufacturer. The product should not be disposed of with regular household waste.

Emergency water shut off system
Auraton Flood Sensor Valve is an emergency cut-off valve, which cuts off water supply after detecting flooding in the controlled area. The device is able to close the water flow in the circuit, when flooding is detected by the Auraton Flood Sensor. For proper operation of the system one Auraton Flood Sensor Valve and at least one flood Auraton Flood Sensor are required (up to 10 sensors).

DANGER!
The valve is using metal sphere inside its pipe in order to operate properly. One must not put fingers or any other parts of the body inside the valve becasue it might cause serious injuries including cutting off the fingers!

Valve description

Connection (1/2”, 3/4”, 1”)
Charging control
Knob
Power supply socket
Contact point for a magnet/ flood sensor to control match/delete function
Plug

DIMENSIONS

Technical specifications

Model: Auraton Flood Sensor Valve
Torque: 2 Nm
Opening / closing time: approx. 5s
Operating voltage: 5 V
Power consumption: 3 W
IP rating: IP67
Maximum pressure of medium: 1,0 MPa
Temperature range of medium: 0-100°C
Working temperature range: -20°C – 45°C
Humidity: ≤85% non-condensing
Working mode control: LED, sound signal
Power supply: Battery Li-ion / 5V DC (USB)
Compatible with Internet getaway: Auraton Pulse
Radio frequency:
- 865.500 MHz
- 867.200 MHz
- 868.150 MHz
- 868.450 MHz
- 869.800 MHz
Radio signal strength: 11 dBm
Radio receiver category: 2
Operation range: in a building – up to 50 m

Disposing of the devices
The devices are marked with the crossed waste bin symbol. According to European Directive no. 2012/19/EU and the Act concerning used up electric and electronic equipment, such a marking indicates that this equipment may not be placed with other household generated waste. The user is responsible for delivering the devices to a reception point for used-up electric and electronic equipment. Hereby, LARS Andrzej Szymański declares that the radio equipment type Auraton Flood Sensor Valve is in compliance with Directive 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://manuals.auraton.pl