Laney IRF-DUALRIG212 60W 2-Channel Guitar Amplifier Head and Cab User Manual

Laney IRF-DUALRIG212 60W 2-Channel Guitar Amplifier Head and Cab

WHATS IN THE BOX

The Laney IRF-DUALRIG212 contains the following items in the box:

• IRF-DUALTOP – IRONHEART FOUNDRY SERIES – 60W Guitar amplifier head
• GS212FE – GS FOUNDRY SERIES Guitar Cabinet – HH H1260 2×12 inch
• Loudspeaker connecting cable

DETAILED USER GUIDE

• Detailed information and user guides for the IRF-DUALTOP may be found on the Laney website product pages, which you can find by clicking or scanning the QR code:

GS212FE SPECIFICATIONS

HOW TO CONNECT THE LEADTOP TO GS212FE

The IRF-DUALRIG212 package comes included with a high-quality speaker cable. Connect one end to the GS212FE input socket and the other end to the Speaker out socket on the IRF-DUALTOP amplifier.

DIMENSIONS (in mm)

SAFETY AND WARNINGS

In order to take full advantage of your new product and enjoy long and trouble-free performance, please read this owner’s manual carefully, and keep it in a safe place for future reference.

1. Unpacking: On unpacking your product please check carefully for any signs of damage that may have occurred whilst in transit from the Laney factory to your dealer. In the unlikely event that there has been damage, please re-pack your unit in its original carton and consult your dealer. We strongly advise you to keep your original transit carton, since in the unlikely event that your unit should develop a fault, you will be able to return it to you dealer for rectification securely packed.

2. Amplifier Connection: In order to avoid damage, Generally it is advisable to establish and follow a pattern for turning on and off your system. With all system parts connected, turn on source equipment, mixers, effects processors etc, BEFORE turning on your amplifier.
   Many products have large transient surges at turn on and off which can cause damage to your speakers. By turning on your amplifier LAST and making sure its level control is set to a minimum, any transients from other equipment should not reach your loud speakers.
   Wait till all system parts have stabilized, usually a couple of seconds. Similarly when turning off your system always turn down the level controls on your amplifier and then turn off its power before turning off other equipment.

3. Cables: Never use shielded or microphone cable for any speaker connections as this will not be substantial enough to handle the amplifier load and could cause damage to your complete system. Use good quality shielded cables everywhere else.

4. Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.

5. Heed all warnings.

6. Follow all instructions.

7. Do not use this apparatus near water.

8. Clean only with a dry cloth.

9. Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.

10. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

11. An apparatus with Class I construction shall be connected to a mains socket outlet with a protective connection. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

12. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.

13. Only use attachments/accessories provided by the manufacturer.

14. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

15. The mains plug or appliance coupler is used as the disconnect device and shall remain readily operable. The user should allow easy access to any mains plug, mains coupler and mains switch used in conjunction with this unit thus making it readily  operable. Unplug this apparatus during lightning storms or when unused for long periods of time.

16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

17. Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

18. If this product is to be mounted in an equipment rack, rear support should be provided.

19. Note for UK only: If the colours of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:
    •The wire that is coloured green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ coloured green or coloured green and yellow.
    • The wire that is coloured blue must be connected to the terminal that is marked with the letter N or the colour black.
    •The wire that is coloured brown must be connected to the terminal that is marked with the letter L or the colour red.

20. This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus.

21. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in
    susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational Safety and Health  Administration (OSHA) has specified the following permissible noise level exposures: According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.

22. If your appliance features a tilting mechanism or a kickback style cabinet, please use this design feature with caution. Due to the ease with which the amplifier can be moved between straight and tilted back positions, only use the amplifier on a level, stable surface. DO
    NOT operate the amplifier on a desk, table, shelf or otherwise unsuitable non- stable platform.

23. Symbols & nomenclature used on the product and in the product manuals, intended to alert the operator to areas where extra caution may be necessary, are as follows:

CAUTION| Intended to alert the user to the presence of uninsulated ‘Dangerous Voltage’ within the products enclosure that may be sufficient to constitute a risk of electrical shock to persons.
Ce symbol Est utilities purr inducer a l’utilisateur de cu product de tension non-insole dangerous movant  ere d’intensite suffocate pour constituter un bisque de choc  electrique.
Este symbol tine el porosity de alerted al usurious de la presence de ‘(voltaje) peligroso’ que no tine aislamiento dantron de la cava del product que pureed tenner ulna magnitude sufficient Como para constituir resign de corrientazo.
Dieses Symbol sol den Amender vow unsolierten gefahrlichen Spannungen interhall des Rehouses warned, die von Ausrichender Starke send, um eigen elektrischen Schlage verursachen zu conmen.
---|---
WARNING| Intended to alert the user of the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
Dieses Symbol sol den Amender vow unsolierten gefahrlichen Spannungen interhall des Rehouses warned, die von Ausrichender Starke send, um eigen elektrischen Schlage verursachen zu conmen.
Este symbol tine el porosity de la alerted al uzarin de la presences de instrucccones import antes sober la operation y mantenimiento en la literature que vine cone product.
Dieses Symbol sol den Benítez auf weightage Instructional in der Bedienungsanleitung aufmerksam Machen, die Handhabung und Warton des Products betreffen.
CAUTION:

ATTENTION:

PRECAUCION:

VORSICHT:

| Risk of electrical shock – DO NOT OPEN. To reduce the risk of electrical shock, do not remove the cover. No
user serviceable parts inside. Refer servicing to qualified personnel.Bisques de choc electrique – NE PAS OUVIRIR. Alfin de require le rescue de choc electrique, ne pas enslaver lecouvercle. II ne se trove a l’interieur acne piece movant ere repartee par l’utilisateur. Conifer l’entretien a un personnel qualified.

Rusinko – Elektrischen Schlage! Niche offend! Um das Rusinko eons elektrischen Schlage’s zu vermined, niche die
Abdeckung inferno. Est defined such koine Teele Darin, die vow Amender repairer warden Contend.
Reparaturen knur von qualifiziertem Fachpersonal durchfuhren lessen.

WARNING:

ADVERTISSEMENT:

ADVERTENCIA

ACHTUNG:

| To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this
appliance please read the operating instructions for further warnings.Alfin de Prevnar les bisques de recharge electrique out de feu, n’exposez pas cat apparel a la plie out a
l’humidite. Avant d’utiliser cat apparel, loses les advertisements supplentaires sites dams le guide.

Para evictor corrientazo o peligroso de incendiary, no Deja expect a la Lluvia o humeral ester apparat Antes de
user ester apparat, lea mas advert CIAs en la glia de operation.

Um eigen elektrischen Schalk odder Feuergefahr zu vermined, solute dieses Great niche dem Regen odder
Feuchtigkeit ausgesetzt warden. Vow Inbetriebnahme unbending die Bedienungsanleitung lessen.

| This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions:

• This device may not cause harmful interference
• This device must accept any interference received, that may cause undesired operation.
  Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
  Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation
  between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an  experienced radio/TV technician for help.

| This product conforms to the requirements of the following European Regulations, Directives & Rules: CE
Mark (93/68/EEC), Low Voltage (2014/35/EU), EMC (2014/30/EU), RoHS (2011/65/EU), ErP (2009/125/EU)
SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Laney Electronics Ltd. declares that the radio equipment is in compliance with Directives 2014/53/EU, 2011/65/EU, 2009/125/EU. Full text of the EU declaration of conformity is available at the following internet address:
http://support.laney.co.uk/approvals
| The object of the declaration described above is in conformity with the relevant statutory requirement Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016, The Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, The Ecodesign for Energy-Related Products and Energy Information, (Amendment) (EU Exit) Regulations 2012

| In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of  along with normal household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.

CUSTOMER SUPPORT

    STEELPARK ROAD, COOMBSWOOD BUSINESS PARK WEST, HALESOWEN, B62 8HD. UK
FOR THE LATEST INFORMATION PLEASE VISIT WWW.LANEY.CO.UK

IN THE INTEREST OF CONTINUED DEVELOPMENT, LANEY RESERVES THE RIGHT TO AMEND PRODUCT
SPECIFICATION WITHOUT PRIOR NOTIFICATION.

References

• Laney Amplification - Since 1967
• Laney Amplification - Since 1967
• IRONHEART IRF-DUALTOP A compact twin channel portable tone machine - 60 Watts - Laney Amplification - Since 1967

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>