WODESYS WD-4512BT 600Mbps Wireless USB Adapter Owner’s Manual
- June 13, 2024
- WODESYS
Table of Contents
WIRELESS ADAPTER
600Mbps Wireless USB Adapter
802.11ac/a/b/g/n+BT
Model: WD-4512BT
WD-4512BT 600Mbps Wireless USB Adapter
**
**
KEY FEATURES
- 600Mbps wireless transmission rate
- Dual band frequency 2.4GHz 150Mbps 5.8GHz 433Mbps
- Provides two methods of operation: Infrastructure and Ad-Hoc
- Quick Secure Setup, complies with WPS for worry free wireless security
- Supports 64/128-bit WEP, complies with 128 bit WPA standard(TKIP/AES), supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X
- Supports Windows XP/Vista/win7/win8/win8.1/Win10
- Seamlessly compatible with 802.11b/g/n devices
- With Bluetooth 4.2
Specifications
Chipset | Realtek RTL8821CU |
---|---|
Interface | USB2.0 Hi-Speed connector Bluetooth 4.2 |
Wireless Speed | 11n: Up to 150Mbps AC: Up to 433Mbps |
Frequency Range | 2.4GHz & 5.8GHz |
Wireless Transmit Power | 20dBm(MAX EIRP) |
Modulation Technique | OFDM/CCK/16-QAM/64-QAM |
Work Mod | Ad-Hoc / Infrastructure |
Wireless Security | 64/128 bits WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) |
Temperature Range | Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºC |
Humidity | Operating: 5% to 95% (non-condensing), Storage: Max. 90% (non- |
condensing)
Support Operating System| Windows
Dimensions (H x W x D)| 19.5x 15x 7 mm
RF Performance Table for 2.4GHz and 5.8GHz
| Data Rate| TX Power| Tolerance
---|---|---|---
2.4GHz
802.11b| 1Mbps| 16dBm| ±2dB
11Mbps| 16dBm| ±2dB
2.4GHz
802.11g| 6Mbps| 14dBm| ±2dB
54Mbps| 13dBm| ±2dB
2.4GHz
802.11n
20MHz| MCS0| 13dBm| ±2dB
MCS7| 13dBm| ±2dB
MCS8| 13dBm| ±2dB
2.4GHz
802.11n
40MHz| MCS0| 13dBm| ±2dB
MCS9| 13dBm| ±2dB
2.4GHz
802.11b| 1Mbps| -97dBm| ±2dB
11Mbps| -90dBm| ±2dB
2.4GHz
802.11g| 6Mbps| -92dBm| ±2dB
54Mbps| -76dBm| ±2dB
2.4GHz
802.11n
20MHz| MCS0| -92dBm| ±2dB
MCS7| -75dBm| ±2dB
MCS8| -71dBm| ±2dB
2.4GHz
802.11n
40MHz| MCS0| -89dBm| ±2dB
MCS9| -67dBm| ±2dB
5.8GHz
11a| 6Mbps| -94dBm| ±2dB
54Mbps| -78dBm| ±2dB
5.8GHz
11ac
80MHz| MSC0| -89dBm| ±2dB
MCS| -64dBm| ±2dB
Dimensional Drawing
Warning!
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation This device has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
Copyright © WODESYS CO., LTD .
WWW.WODESYS.COM
Wodesys does not accept liability for any errors that may arise. All
specifications are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>