OPTIX 86087102 24 in. x 24 Inch Clear Prismatic Acrylic Lighting Panel Instruction Manual
- June 13, 2024
- OPTIX
Table of Contents
OPTIX 86087102 24 in. x 24 Inch Clear Prismatic Acrylic Lighting Panel
Product Information: Cutting Lighting Panels from Plaskolite
The Plaskolite lighting panels are designed to be easily cut to fit your
desired size or shape. This process can be done using a few simple tools and
following the steps outlined below.
Tools Needed
- Straight edge
- Scoring tool
- Workbench
- Diagonal cutters (for lighting louvers)
Step 1: Measure and Score
- Measure the desired size of the lighting panel and clamp it securely to the workbench using a straight edge.
- Using the straight edge as a guide, lightly pull the scoring tool across the smooth side of the panel. Repeat this scoring motion until you have scored halfway through the panel thickness.
Step 2: Snap Off
- Hang the scrap portion of the panel off the edge of the workbench.
- Apply gentle downward pressure to the scrap portion to break it off from the main panel.
- Note: It may be helpful to reclamp the panel before snapping off any excess.
Step 3: Lighting Louvers
If you need to cut lighting louvers, use diagonal cutters to snip off the
excess. For visual guidance on cutting lighting panels, we recommend visiting
our website at
www.plaskolite.com/resources. You will
find videos demonstrating the cutting process. Please note that these
instructions are provided in good faith, based on our understanding. However,
we cannot guarantee the suitability of our materials and suggestions for all
conditions and methods of use. We recommend that you determine the suitability
of our products and suggestions before adopting them on a commercial scale.
For more information, please contact: PLASKOLITE 400 Nationwide Blvd, Suite
400 www.plaskolite.comMSC360_How To Cut 1021
These suggestions and data are based on information we believe to be reliable.
They are offered in good faith, but without guarantee, as conditions and
methods of use are beyond our control. We recommend that the prospective user
determines the suitability of our materials and suggestions before adopting
them on a commercial scale.
400 Nationwide Blvd, Suite 400
Columbus, OH 43215
800.848.9124 Fax: 877.538.0754
plaskolite@plaskolite.com
www.plaskolite.com
MSC360_How To Cut 1021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>