SoundCore Rave Party SE Party Speakers A3390J User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Rave Party SE Party Speakers A3390J
USER MANUAL
Charging
Charge your Speaker
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
Check Battery Level
Charge your USB Devices
Charge your USB devices through the USB connector.
Powering On/Off
- This speaker will power off automatically after 30 minutes if no device is connected.
Using your Soundcore Rave Party SE
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Soundcore Rave Party SE speakers can pair with each other for stereo sound.
1. Connect either speaker with your Bluetooth device.
2. On both Soundcore speakers, press the TWS button once to enter lWS pairing
mode.
To exit the lWS mode, press and hold the lWS button for 2 seconds.
AUX/USB Mode
Plug in a 3.5mm audio cable or insert a USB storage device.
- When using AUX mode, control audio playback via the connected device.
Button Controls
Light Effects
- Download the Soundcore app to check all available light modes.
Soundcore App
Download the Soundcore app for enhanced product experience.
- Set up Bluetooth connections
- Check product information
- Update firmware
- Indicate battery status
- Switch among multiple light modes
- Switch between indoor and outdoor sound modes
- Light DJ mode to support light and sound variation
- Switch BassUp mode
- Remotely control the volume and play/pause
- Set Auto-power off time
Specifications
Specifications are subject to change without notice.
| DC power input | 15V= 3A |
|---|---|
| Battery capacity | 4900 mAh / 7.4 V |
| U5B output | 5 V= 2.1 A |
| Output power | 80W |
| Charging time Appr. | 4.5 hours |
| Playtime (varies by volume level and music content) | Up to18 hours |
| Waterproof level | IPX7 |
| Bluetooth version | V5.0 |
| Bluetooth range | 20 m / 66 ft |
| USB audio format | .mp3,.wma |
SoundCore Rave Party SE Party Speakers A3390J User Manual – [Download PDF]
SoundCore Rave Party SE Party Speakers A3390J Quick Start Guide – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>