User’s Manual Video Baby Monitor
Item 9501\

Your child’s safety depends on you. Proper usage cannot cannot be assured unless you follow these instructions.

PRODUCT OVERVIEW

1.1 What’s included

Technical Specifica

1. 2.4G wireless digital signal transmission, more than 250 frequency hopping, no WiFi interference
2. HD sensor
3. Digital signal encrypansmission, High security
4. Barrier free transmission distance 200-300 meters, partance 30 meters
5. 4.3-inch high-definiCD screen, clearer image display
6. The monitor has a built-in baery,capable for using more than 5 hours
7. With 8 lullabies help baby to sleep, which can be played with remote control
8. Monitor with temperature display, cenade and Fahrenheit switch
9. With two-way intercom func
10. With infrared night vision funcatching in the night
11. Cry detec
12. Timer Alarm& Over sounds alarm
13. Micro USB input
14. High capacity Polymer baery 1500MA
15. VOX/ECO mode, ace when dectecoice/cry
16. Display Screen Could be connected with 2 camera at the same
17. Personalized wallpaper seo
18. Photosensie

1.2 BABY UNIT OVERVIEW

1.3 PARENT UNIT OVERVIEW

1. DC-jack
2. Power/volume LEDs
3. Boot key
4. Camera switching key
5. Menu key| 6. OK key
7. Direction pad
8. Music key
9. Intercom key
10. Reset key| 11. Speaker
12. Bracket
13. Battery cover
14. Antenna
15. LCD
---|---|---

BUTTON INTRODUCTION

1. Power On / off key: Long press to turn on/off machine and short press to turn off the screen after boot
2. Ok key: Implement menu execution instructions
3. Pair code key : Perform the pairing effect of the camera on the code
4. Menu / return key: Implement the pop-up of the menu, as well as the return of each submenu to the next level
5. Up key: Realize menu setting item up option scroll. And a quick increase in screen brightness.
6. Down key: Implement menu settings to scroll down options. And a quick decline in screen brightness.
7. Left key: Realizes the left movement of the menu setting item. And the quick decline of volume.
8. Right key: Realizes the right movement of the menu setting item. And the quick increase of volume
9. Intercom key: In the monitoring screen, long press this key to realize the intercom function
10. Camera switching key: Achieve camera switching, lock a single camera monitoring, and achieve two camera cycle monitoring functions
11. Music on / off shortcut key: quickly turn on and off music in the monitoring screen. When the music is turned on, the short press to switch the music.
12. Reset key: Once pressing the boot key is invalid and cannot be used normally. You can press the reset key lightly and then press the boot key to

FUNCTIONS

1. TX camera
   1.1 This machine uses DC adapter with output 5V/1A
   1.2 Power the device on and the blue led indicator lights on, indicating that the machine is turned on and is working
   Note: Use only the supplied power adapter.
   1.3 Night vision: the baby device has 10 infrared light, which are used to complement the light in the dark, and the user gets a clear image.
   1.4 Turn on and off the infrared light: on working mode. the infrared light can be turned on and off automatically through the dark and bright light of the environment. so as to increase the amount of light fed by the camera and achieve the supplementary light effect in the dark state of the image. so that the user can view the best image.
   1.5 please place this device within the range of baby monitoring, and the camera is aimed at the area you want to monitor. Don’t put the machine where the baby reaches out and get it, so as to avoid strangling the power cable to the baby and causing asphyxiation
   1.6 If the image or sound is disturbed. try moving the device to a different location for debugging to the best effect.
   1.7 when the first to use, you need to match it successfully before you can use it. For more information on pairing. see the details page for adding cameras to 2.5.5 cameras.

2. RX display
   2.1 This machine is powered by a 3.7v lithium battery or a DC adapter output of 5V/1A, The power Adapter can be used for charging when the lithium battery is low Note: Use only the supplied power adapter.
   2.2 Turn on the device and long press the boot key ,then enter into the initial system screen. This machine can support two cameras to monitor
   2.4 The monitor screen icon is shown in the following figure Signal strength indica
   The present camera icon (press the switch key to switch.1 for the first camera and 2 for the second camera)
   Locking a single camera monitor icon (press the switch key to switch, when switching to circular monitoring, the icon prompt will be changed.
   Switching to this icon it means a circular monitoring)
   The music icon , the device has 8 pieces of music totally, and the user select

   1 – 8 as a single loop, and if you select 9, all the musics will be loop

   played.
   Speaker icon
   Temperature for baby room,
   (Fahrenheit or Celsius can be choosed on the menu)
   Time icon(AM means morning, PM means aernoon)
   Baery icon

2.5 Menu Op
The menu options are shown in the following figure

Press menu / return key to pop-up menu, which contains 6 items:

| Breast-feeding reminder se
---|---
| Music selec
| Time se
| Temperature unit se
| Camera se
| Voice control se

You can select the menu by right or lekey to move the Cursor , Press the up and down keys to make the selecthen Press the ok key to confirm. Press the menu/ return key to exit the setup menu.
2.5.1 Breast-feeding reminder se
Enter the feeding reminder se, there are 5 alarms to choose from the following figure.
Select the breast-feeding reminder seup, press the up and down key to select, and then press OK key to confirm. (there are 6 sub-opfor breast-feeding reminder seoff and 5 periods of alarm clock) ,the default is OFF

2.5.2 Music selecse
Enter the music seitem, there are 10 sub op seas shown below.
Select the music sepress up and down key to select, then press OK key to confirm. (music se have 10pcs sub opoff, loop, and 8 pieces of music) the default is OFF

2.5.3 Time se
The seis shown in the following figure.
Select the se, press up and down key to change the value, and press the ok key to move the cursor. Set the hours, minutes, seconds in turn. and AM, PM, press OK key to confirm.

2.5.4 Temperature se
Enter the temperature seas shown in the following figure.
Select the temperature se, it will appear Celsius and Fahrenheit two subopuse the top, lower keys to select, press ok key to confirm. Default to Fahrenheit

2.5.5. Camera
Enter the camera seas shown in the following figure select the camera se, there will be a loop, delete and add ,three sub opuse the up and down key to select , when you press the ok key to select the loop seitem, and the three sub opwill pop-up as follows.
Select by up and down key, and press the ok key to confirm
(check the camera 1 means the camera 1 is locked in the monitor screen. select camera 2 means the camera 2 is locked in the monitor screen. Select the loop item to means the camera 1 and the camera 2 are in the monitoring screen by Cycle switching)

When you select the delete item, press the ok key to pop up the two sub-opas shown in the following figure Select by up and down key. Press the ok key to confirm (delete item means to delete the camera that has been paired successfully). it means the deleis successful when the icon * on the upper of the camera disappears.
when the added item is selected to press the ok key. The two sub-opare shown as follows figure.

Use the up and down key to select, press the ok key to confirm, at this the power indicator flashes. At the same press Pair code key in TX camera, the power indicator of the TX camera is also flashing when Pairing , a few seconds later matched successfully. When the pairing succeeds, the following figure When the pairing is successful, the icon * appears the upper of the camera, Aer successful pairing the camera can be used, When the camera is out of range, it will lose contact. Entering the range again will automaally connect Note: the camera has been matched at the factory, and there is no need to repairing unless they are out of touch.

2.5.6. Voice control se
Enter the voice control seas shown in the following figure Select the voice control se, press up and down key to select, pressing ok key will appear off, low, medium and high, four sub-op, then press up and down key to select , then press OK key to confirm. The default is OFF.

Note: when one of the three items of low, medium, and high is selected, there is a corresponding icon appear at the top of the screen in the monitoring screen that shows the following figure)

Focus note: about voice control sensi, in the viewing movie state, when the environmental sound of the TX camera is low to a certain value, the RX machine will turn off the screen and sound, when the environmental sound of the TX camera is high to at a certain value, the RX machine will be awakened.
Focus note: about voice control sensi, in the viewing movie state, when the environmental sound of the TX camera is low to a certain value, the RX machine will turn off the screen and sound, when the environmental sound of the TX camera is high to at a certain value, the RX machine will be awakened.

TROUBLE SHOOTING

No reception on the monitor| •The power adapters may not be properly connected.
•Confirm that the camera and monitor are ON.
•Camera may be far away from the monitor.
•Camera and monitor may not be properly paired, follow PAIRING instructions.
•Restart Baby unit and Parent unit.
•Press the reset key at the back of Parent unit.
---|---
Interference or poor reception| •Move the monitor close to the camera.
•The camera or monitor may be placed too close to many metal objects.
•Other electronic devices may be interfering with the signal.
•The battery power may be too low.
•Restart Baby unit and Parent unit.
Feedback . (screeching, static)| •The camera and monitor may be too close together.
•The volume on the monitor may be set too high.
•Press the reset key at the back of Parent unit.
Cannot hear the baby on the parent unit| •Volume setting may be too low.
•Press the reset key at the back of Parent unit.
Image frozen| •Restart the baby unit (plug out the adapter then plug it into the socket again).
•Press the reset key at the back of parent unit (behind the stand).
Temperature is inaccurate| 1. The temperature sensor is positioned very close to the Baby unit and when it warms up during the operation:
•Stretch out the sensor so it would be far enough from the Baby unit.
•Place the Baby unit in an area with good air circulation.
2. If none of the above work, restart the Parent unit.

INSTALLATION METHOD

1. put the TX camera on the working table at the corresponding height. where the baby can be monitored , and adjust the angle of TX camera.
2. fixed with a three-foot bracket and adjust the angle.

MAINTENANCE

Keeping the lens clean can help you monitor the clearest picture. Gently wipe the fingerprints and dust on the lens and LCD screen by sogauze.
Wipe the surface of the machine with a clean, dry cloth. Don’t use rough cloth, which will scratch the outer surface of the machine.
In order to avoid the danger of electric shock. Don’t open the machine or fix it by yourself.
Keep the machine dry. Don’t use the machine in an environment that is too wet. If used in wet environment, it may cause machine failure.
Note: the right to change the design and specificaof this product is subject to change without prior no

Thank you for choosing BEBE STARS products
63 200, NEA MOUDANIA, GREECE
www.bebestars.gr

Documents / Resources

| Bebe Stars 9501 Video Baby Monitor [pdf] User Manual
9501 Video Baby Monitor, 9501, Video Baby Monitor, Baby Monitor, Monitor
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>