milwaukee 2128-20 Redlithium USB Stick Light w Magnet And Charging Dock User Manual

milwaukee 2128-20 Redlithium USB Stick Light w Magnet And Charging Dock

Product Information

The USB Rechargeable Stick Light is a portable lighting tool designed for convenient and efficient illumination. It features a USB rechargeable battery system, allowing you to easily charge the light using a USB-C cable (optional) and power source. The stick light is built with durable components and is compatible with various accessories, such as the USB Stick Light Dock (optional), which provides a convenient charging and storage solution.

Service Parts List

• Catalog No.: 2128-20
• Starting Serial No.: M59A7
• Bulletin No.: 54-06-2180
• Revised Bulletin Date: Oct. 2021

Wiring Instruction

When ordering parts, please specify the catalog number and serial number to ensure accurate and compatible replacements.

Component Parts

Notes

A clean, dry surface is essential for proper performance of any adhesive system. Before applying any adhesive label or nameplate, the intended area must be cleaned with isopropyl alcohol using a clean, lint-free applicator. Allow the surface to dry completely before applying the label or nameplate.

For more information and support, visit www.milwaukeetool.com.

MILWAUKEE TOOL
13135 W. LISBON RD., BROOKFIELD, WI 53005 Drwg. 1

Product Usage Instructions

1. Ensure the USB Rechargeable Stick Light is fully charged before initial use.
2. If using the USB Stick Light Dock (optional), connect it to a  power source using the provided USB-C cable (optional).
3. Attach the USB Cover (Part No. 22-68-2128) to the Stick Light by aligning it with the corresponding slot and firmly pressing it into place.
4. To access the battery compartment, remove the Battery Cap (PartNo. 31-12-0006) by twisting it counterclockwise.
5. Insert the rechargeable battery into the battery compartment, ensuring proper orientation as indicated by the polarity markings.
6. Tightly screw the Battery Cap back onto the Stick Light by twisting it clockwise.
7. To turn on the Stick Light, press the power button located onthe handle or body of the light.
8. Adjust the brightness level by using the available controls or buttons, if applicable.
9. If necessary, attach additional accessories or optional components, such as the USB Stick Light Dock, following the corresponding instructions provided.
10. When not in use, store the Stick Light in a safe and dry location to prevent damage.
11. For maintenance and cleaning, refer to the user manual fordetailed instructions.

For any further assistance or inquiries, please refer to the product’s user manual or contact customer support.

PARTS LIST

SERVICE PARTS LIST

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS| REVISED BULLETIN| DATE

Oct. 2021

|
---|---|---|---
USB RECHARGEABLE STICK LIGHT|
WIRING INSTRUCTION|
CATALOG NO. 2128-20| STARTING              M59A

SERIAL NO.

|

EXAMPLE:
Component Parts (Small #) Are Included When OrderingThe Assembly (Large #).

FIG./PART NO./DESCRIPTION OF PART/NO. REQ.

• 1 22-68-2128 USB Cover (1)
• 2 31-12-0006 Battery Cap (1)
• 3 34-40-2128 O-Ring for Battery Cap (1)
• 4 48-59-2128 USB Stick Light Dock (Optional) (1)
• 5 12-20-2128 Service Nameplate 2128-20 (Not Shown) (1)
• 6 2128-20 USB Rechargeable Stick Light Bare Tool (1)
• 7 42-44-1209 3ft. USB-C Cable (Optional) (1)
• 8 10-20-4309 Warning Label for Dock (Not Shown) (1)
• 9 12-20-0928 Service Nameplate for Dock (Not Shown) (1)

FIG. NOTES
5,8,9 A clean, dry surface is essential for proper performance for any adhesive system. The area intended for application of any adhesive label or nameplate must be prepared by cleaning with isopropyl alcohol. The solvent is to be applied with a clean, lint free applicator and the surface allowed to dry before applying the label or nameplate.

• MILWAUKEE TOOL 3
• www.milwaukeetool.com.
• 13135 W. LISBON RD., BROOKFIELD, WI 53005 Drwg. 1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>