SoundCore Anker SoundBuds Sport NB10 In-Ear Headphones A3260 User Manual

: June 13, 2024
: Soundcore

Table of Contents

SoundCore Anker SoundBuds Sport NB10 In-Ear Headphones A3260
Safety instructions
Hearing Safety
What’s Included
At a Glance
Using Your SoundBuds
Specifications
Notice
RF Warning Statement
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SoundCore Anker SoundBuds Sport NB10 In-Ear Headphones A3260

USER MANUAL

Safety instructions

Avoid dropping.
Do not disassemble.
Keep out of reach of children. It contains small parts which may be a choking hazard.
Do not submerge in water.
Avoid extreme temperatures.
Do not use the device outdoors during a thunderstorm.
Use original or certified cables.
Do not use any corrosive cleaner/oil to clean.

Hearing Safety

To avoid hearing damage, do not listen for extended periods at high volume.
Do not turn the volume so high that you’re unable to hear your surroundings.
Do not use earphones while driving.
You should use caution or temporarily discontinue use in potentially hazardous situations.

What’s Included

At a Glance

1. Eartips
2. LED indicator
3. Volume up button
4. Multifunction button
5. Volume down button
6. Microphone
7. Micro USB charging port

Using Your SoundBuds

1. Turn on / off

ON: Flashing blue once

OFF: Flashing red once

SoundBuds will automatically turn off after 2 minutes if no device is connected.

2. Charge your SoundBuds

Flashing red: Low battery

Steady red: Charging

Steady blue: Fully charged

NOTE:

Use the included USB cable to charge your SoundBuds. Make sure they are fully charged before first use.
To preserve battery lifespan, fully charge at least once every 45 days

3. Pair with your device

Enter pairing mode

Un-pair connected device and re-enter pairing mode

Rapidly flashing blue: Pairing mode

Steady blue: Connected to a device

Note:

When turned on, SoundBuds will automatically connect to the last connected device if available. If not, SoundBuds will enter pairing mode.
Having connection problems? Remove SoundBuds from your device’s Bluetooth history, ensure they are less than 3 feet away then try pairing again.

4. Controls

Play / pause

Skip forward

Volume up / down

Note: When there is an incoming call while playing music, music automatically pauses to allow you to answer/reject the call. Once the call is ignored or ended, the music resumes.

Answer / end call

Reject call

Put current call on hold and answer incoming call

Transfer a call between headphones and mobile phone

Switch between held call and active call

Steady blue: On a call

Flashing blue: Incoming call

Activate Siri / other voice control software

5. Wear your SoundBuds

Specifications

Specifications are subject to change without notice.

Input	5 V ==0.1 A
Charging time	1.5 hours
Play time (varies by volume level and content)	6 hours
Battery capacity	95 mAh
Waterproof rating	IPX5
Weight	19.3 g / 0.7 oz
Impedance	16Ω
Driver (full range)	12 mm
Frequency response	20 Hz – 20 KHz
Bluetooth version	V4.1 + EDR
Range	10 m / 33 ft

Notice

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.