Pyle PWRC81 In-wall Ceiling Speaker User Manual

: June 13, 2024
: Pyle

Table of Contents

Pyle PWRC81 In-wall Ceiling Speaker
IN-CEILING SPEAKERS
IN-WALL SPEAKERS
INCLUDED
SPEAKER PLACEMENT
INSTALLATION
TROUBLESHOOTING
WIRING DIAGRAM
SPEAKER CONNECTIONS
EXISTING CONSTRUCTION
FAQs
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pyle PWRC81 In-wall Ceiling Speaker

IN-CEILING SPEAKERS

PDIC60 PDIC60T PDICBO PDICBOT
PDIC51 RD PDIC61 RD PDIC81 RD
PDIC55SQ PDIC65SQ PDIC85SQ
PWRC52 PWRC62 PWRC82
PWRC51 PWRC61 PWRC81
PDIC51 RDBK PDIC61 RDBK PDIC81 RDBK
PDIC51 RDSL PDIC61 RDSL PDIC81 RDSL
PDIC51RDWT PDIC61RDWT PDIC81RDWT

IN-WALL SPEAKERS

PDIW52 PDIW62 PDIW55 PDIW65
PDIWCS56 PDIWCS62 PDIWSB PDIWS10 PDIWS12 PDIWS28
PDIW57 PDIW67 PDIW87
PDIW55BK PDIW55WT PDIW55SL PDIW65BK PDIW65WT PDIW65SL
PDIWCS56BK PDIWCS56WT PDIWCS56SL

www.pyleaudio.com

MODEL NO.	Cut-out Dimensions	Dimensions(each speaker)
PDIC60	7 716″(W)X 7 71a·(H)x 2 3/4•(D)	9″”tw> X

9″(H)

|

X 2 3/4•(0)

PDIC60T| 7 718″ (W}X 7 7ts-(H)X 4 Sis-(0)| 9′”(W) X| 9″(H)| X 4 5/s-(D}
PDIC80| 9 3/6″ (W)X 9 3/6″(H)X 3 11z-(D)| 1Q3/4•(W)x1Q3/4• (H) X 3 11z-(D)
PDIC80T| 9 3/9·(W}X 9 3/8″(H}X 5 3/4•(0)| 1Q314•(W)x1Q314• (H) X 53/4•(0)
PDIC51RD/51RDBK

PDIC51RDWT/51RDSL

| 6 11z- (W)X 6 1lz-(H}X 2 5/s-(D)| 8″(W) X| 8’1(H)|

x25is-(D)

PDICSSSQ| 5 3/4• (W)X 5 3/4•(H}X 2 3/4•(0)| 7″(W) X|

7″(H)

| x23/4·(D}
PDIC61RD/61RDBK PDIC61WT/61RDSL| 7 71s-(W}X 7 7te-(H)X 2 l/4•(0)| 9″(W) X|

9″(H)

|

x23J4•(D}

PDIC65SQ| 7 114•(W)X 7 ‘l/4·(H)X 3″(0}| 8 5/g- (W}X 8 5le-(H)X J”(D)
PDIC81RD/81RDBK PDIC81WT/81RDSL| 9 3/6″ (W)x 93/s-(H)x 311z,(D)| 1Q314•(W)x1Q314• (H) X 3 117(0}
PDIC85SQ| 8 Sia- (W}X 8 5/s-(H)X 3 112″(0)| 10″(W)X 1Q”(H) X 3 112″(0)
PDIWSS/SSBK/SSSLJSSWT| 6 51s-(W)x1 Ql/1,(H)X 2 l/4•(0)| 75ia-(W)x111t4•(H)X 2″ l/4• (D)
PDIW52| 6 51s-(W}x1Ql/s·(H)X23/4•(0)| 7 5is-(W}x11114•(H)X 2″ l/4· (D)
PDIW65/65BK/65SLJ65WT| 7 314• (W}x1131s•(H)X 2 71s-(O}| 8 314•(W)x1211z-{H)X 271s•(O)
PDIW62| 7 314•(W)x113Is•(H)x 2 718″(0}| 8 314•(W)x12 1IZ”{H)x 2 7Is•(O)
PWRC51/52| 61I2″(W)X 61/Z”(H)X 2 5/8″(0}| 8″(W) X| 8″(H)| x25/8″(0)
PWRC61/62| 7 718″(W}X 77Is•(H)x 2 3/4•(0)| 9″tw> X| 9″(H}| x2¾·(0)
PWRC81/82| 9 3I8″(W}X 93Is•(H)X 3 112″(0}| 1 Q¾·(W}X1 Q 31,• (H) X 3 1IZ”(D}
PDIW57| 7.04″(w)x10.6″(H)x3.68″(D)| 8.4″(w)x12″(H)x4.2″(D)
PDIW67|

8.24″(w)x11.76″(H)x3.68″(D)

|

9.52″(w)x13″(H)x4.28″(0)

PDIW87| 8.84″(w)x13″(H)x4″(D)| 10.24″(w)x14.4″(H)x4.44″(D)
PDIWCS56/56BK/56Sl156WT|

14″(w)x6.4″(H)x3″(D)

|

15.6″(w)x7.6″(H)x3.6″(D)

10.8″(w)x10.8″(H)x3.5″(D)

|

12.2′{w)x12.2″(H)x4.1″(D)

PDIWS12|

13.2″(w)x13.2″(H)x3.5″(D)

|

14.6″(w)x14.6″(H)x4.1″(D)

Thank you for purchasing this PYLE in-wall/in-ceiling speaker system. It is a state-of-the-art product carefully designed and manufactured for your installation needs, and has been thoroughly tested to ensure consistent and reliable performance.

If you have any questions about the installation or operation of your PYLE in- wall/in-ceiling speaker system which is not answered by this manual, contact your dealer immediately.

INCLUDED

IN-WALL SPEAKERS

N-CEILING SPEAKERS

SPEAKER PLACEMENT

FRONT SPEAKERS

INSTALLATION

The in-wall/in-ceiling speakers were designed to be easily installed. However, if you are unsure of your ability to properly install these loudspeakers please contact your dealer or a qualified installer.

TOOLS NEEDED

TROUBLESHOOTING

IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS:
- Check that the receiver/amplifier is on and a source is playing.
- Check all wires and connections between the receiver amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured, or touching each other.
- Review the proper operation of your receiver/amplifier.
IF THERE IS NO SOUND COMING FROM ONE SP EAKER:
- Check the “Balance” control on your receiver/amplifier.
- Check all wires and connections between the receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured, or touching each other.
IF THERE IS LOW (OR NO) BASS OUTPUT:
- Make sure the connections to the left and right “Speaker Inputs· have the correct polarity{+ and-).
- Consider adding a powered subwoofer to your system.
- In Dolby Digital Of DTS modes. make sure your receiver/processor is correctly configured. When using a subwoofer, make sure the subwoofer output of the receiver/ processor has been enabled. If no subwoofer is being used, make sure the left and nght front and rear speakers have been configured as “LARGE.” See your receiver/processor’s owner’s manual for further information on the correct speaker configuration in Dolby Digital, DTS and other surround sound modes.
IF THE SYSTEM PLAYS AT LOW VOLUMES BUT SHUTS OFF AS VOLUME IS INCREASED:
- Check all wires and connections between the receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed. cut, punctured, or touching each other.
- If more than one pair of main speakers is being used, check the minimum requirements of your receiver/amplifier.

WIRING DIAGRAM

{PDIC60T/PDIC80T)

70V SYSTEM SPEAKER WIRES

$Pyle-PWRC81-In-wall-Ceiling-Speaker $7$$

REAR SPEAKERS

IN-CEILING

Proper placement of the speakers is an important step in obtaining the most realistic soundstage possible. These recommendations are for the optimum placement of the loudspeakers. Use these placement recommendations as a guide. Slight variations will not diminish your listening pleasure. The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listener’s ears will be, with the tweeters aimed toward the listener at ear-level height.

In a home theater configuration, the two surround speakers should be placed slightly behind the listening position and ideally should face each other and be at a level higher than the listener’s ears. If that is not possible, they may be placed in a wall (or in the ceiling) behind the listening position, facing forward. The surround speakers should not call attention to themselves. They should provide a diffuse, ambient sound accompanying the main program material heard in the front speakers. In Dolby* Digital and DTS® systems, aim the tweeters toward the listening position at ear-level height.

SPEAKER CONNECTIONS

CONNECTION TIPS

The wices for, both speake,s should be \ the same length. II One speaker is placed closer to 1he amplifier than the other, hiding the excess wire behind the wall. Speakers and electronics tennina\s have corresponding(+) and H terminals.
We use red to denote the(-+) termi- 1′ nal and black for the(-) termi- + nal. It is important 10 connect both speakers identically:(+) on the speaker 10 (+) on the amplifier and H on the speaker to (-) on the amplifier. Wiring ·out of phase results in thin sound, weak bass, and a ?OOr stereo image. With the advent of multi-channel surround sound systems, connecting all of the speakers in your system with the correct polarity remains equally important in order to preserve the proper ambiance and directionality of the program material.

EXISTING CONSTRUCTION

IN-WALL SPEAKERS

Cut the drywall. Note:Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.
Screw out the two screws to separate the frame first.
Place the frame assembly on the wall. Screw down each of the six Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall
Connect the speaker wires to the speaker. Screw down each of the six Phillips head screws.
Put in the strips of adhesive to secure the grille.
The in-wall speakers feature unique swivel mounts for the tweeters that enable you to aim the very directional high frequencies toward the listening position, at ear-level height. PDIW55/PDIW65/PDIW57/PDIW67/PDIW87 PDIWS28/PDIWS8/PDIWS10/PDIWS12 PDIWCS56/PDIWCS62 tweeter adjustment: Before installing the speaker grille, gently press on the outer edge of the tweeter mount to adjust the position of the tweeter. The tweeter will not swivel more than 15 degrees in any direction; do not attempt to force it to move further.
Replace the metal grille.

PDIW52/PDIW62

IN-CEILING SPEAKERS

Cut the drywall.
Note : Always allow at least one-half inch between a wall stud and the speaker cutout or the locking labs will not be able to swivel into place.
Connect the speaker wires to the speaker.
Place the frame assembly in the wall.
Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille.
The in-ceiling speakers feature unique swivel mounts for the tweeters that enable you to aim the very directional high frequencies toward the listening position, at ear-level height. Before installing the speaker grille, gently press on the outer edge of the tweeter mount to adjust the position of the tweeter. The tweeter will not swivel more than 15 degrees in any direction; do not attempt to force it to move further.
Replace the metal grille.

Just for PDIC60/PDIC80

After installing the speaker grille, gently press on the mesh of the tweeter to adjust the position of the tweeter.

FAQs

What brand manufactures the PWRC81 speaker?

The PWRC81 speaker is manufactured by Pyle.

What is the type of this speaker?

It is an In-Ceiling speaker.

How is the speaker connected?

The speaker uses a wired connectivity technology.

Does the speaker have any special features?

Yes, it has a special feature for radio.

Is the Pyle PWRC81 weather-resistant?

Yes, the speaker is weather-resistant, making it suitable for high moisture areas. Its marine-grade construction makes it perfect for both indoor and outdoor installations.

What is the frequency response of the speaker?

The speaker has a frequency response range of 55Hz - 22kHz.

How much power can the Pyle PWRC81 handle?

The speaker has a power-handling capability of up to 400 watts peak.

What is the design of the speaker?

It has a flush mount design which allows for easy in-wall or in-ceiling installations.

How is the installation process of the speaker?

The speaker comes with a cut-out template that measures 9 3/8” in diameter and 3 2/3” in mounting depth for easy installation. Additionally, mounting hardware is included for precise application.

How much does the Pyle PWRC81 speaker weigh?

The speaker weighs 5.08 pounds.

What are the dimensions of the speaker?

The product dimensions are 11.02 x 9.84 x 11.61 inches.

Download This PDFLink:Pyle PWRC81 In-wall Ceiling Speaker