soundcore Q20 Bluetooth Headphones User Manual
- June 13, 2024
- Soundcore
Table of Contents
soundcore Q20 Bluetooth Headphones User Manual
What in the Box
Package Contents
Button Descriptions
Powering On / Off
Power On| 3” Press and hold for more than 3 seconds| | Flashing blue (Status
indicator)
---|---|---|---
Power Off| 3” Press and hold for 3 second| | Steady red for 1 second (Status
indicator)
ANC On| 1” Press and hold for more than 1 second| | Steady green (NC LED
indicator)
ANC Off| 1” Press and hold for more than 1 second| | NC LED indicator off
Pairing
Enter Bluetooth pairing mode when Q20 is off
5” Press and hold for 5 seconds
| Rapidly flashing blue| Pairing mode
---|---|---
| Steady blue| Connected to a device(but is not playing music)
| OFF(Status indicator)| Connected to a device(playing music)
| Rapidly flashing blue| Connected to a device(Incoming call)
Controls
Bluetooth mode
X1: Press| Play / pause Note: the status indicator will light up in blue
for 2 seconds, then turn of
---|---
1”: Press and hold for 1 second| Next track
1”: Press and hold for 1 second| Previous track
: Press| Volume up / down
Default mode| Normal Equalizer
X2: Press multi-function key twice Note: Press twice again to switch back
to Normal Equalizer.| BassUP™(Dual Equalizer)
1”: Press and hold for 1 second| ANC mode (Active noise canceling mode)
activation
ANC mode (Active noise canceling mode) deactivation
Active Noise Cancelling mode (ANC) blocks the noise from surrounding environment while wearing Soundcore Q20.
Mobile phone
| X1: Press | Answer / End call |
|---|
Put current call on hold and answer incoming call
1″: Press and hold for 1 second| Reject call
Switch between held call and active call
Slow flashing blue (Status indicator)| On a call
Slow flashing blue (Status indicator)| Incoming call
Aux-in
Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth mode and ANC will turn off.
Charging Your Headphones
| Notification sound (Tone) :There are only 2 hours of playtime left. You will
hear a voice prompt every 30 minutes| Low battery
---|---|---
| Flashing red once every 60 seconds (Bluetooth LED indicator)
| Steady red (Status indicator)| Charging Note: Do not switch on Q20 while
charging
| Off (Status indicator)| Fully charged
Specifications
- Input: 5 V 0.65 A
- Charging time: 3 hours
- Playtime (Bluetooth with ANC mode on): 40 hours
- Playtime (Bluetooth with ANC mode off): 60 hours
- Playtime (Connected to audio cable with ANC mode on): 35 hours
- Weight: 268 g / 9.5 oz
- Impedance: 16 Ω
- Driver (full range): 40 mm x 2
- Frequency response: 16 Hz – 40 KHz
- Bluetooth version: V 5.0
- Range: 15 m / 49.21 ft
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>