MALMET ES910S ES Energy Saver Bedpan Washer Disinfector Instruction Manual

: June 13, 2024
: MALMET

Table of Contents

MALMET ES910S ES Energy Saver Bedpan Washer Disinfector
Product Information
Product Usage Instructions
Spare Parts Catalogue
Detergent Line Assembly ES915-D/ ES935-D 91-4145SP
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MALMET ES910S ES Energy Saver Bedpan Washer Disinfector

Product Information

Product Name: Bedpan/Urinal Bottle Washer Disinfector
Models: ES910S, ES910P, ES930S, ES930P, ES910S-D, ES910P-D, ES930S-D, ES930P-D, ES915S D, ES915P-D, ES935S-D, ES935P-D
Manufacturer : Malmet (Australia) ABN: 95 001 717 791
Head Office and Customer Service:
- Address: 9-11 McKay Avenue PO Box 373 Leeton NSW 2705
- Phone: +61 2 6953 7677
- Email: info@malmet.com.au

Product Usage Instructions

Ensure that the product is installed and connected to the appropriate water and electrical supply.
Before using the bedpan/urinal bottle washer disinfector, refer to the spare parts catalogue for any replacement parts or accessories that may be needed.
To operate the washer disinfector, follow these steps:
Place the bedpan or urinal bottle in the designated compartment.
Close the door securely.
Select the desired washing and disinfecting program using the control panel.
Start the cycle by pressing the appropriate button.
Monitor the progress of the cycle and ensure that the bedpan or urinal bottle is thoroughly cleaned and disinfected.
After the cycle is complete, open the door and remove the cleaned and disinfected bedpan or urinal bottle.
Clean and maintain the washer disinfector regularly according to the manufacturer’s instructions to ensure optimal performance and longevity of the product.
If any issues or malfunctions occur, refer to the contact information provided to get in touch with Malmet’s customer service for assistance.

Note: The spare parts catalogue mentioned in the user manual contains detailed diagrams and part numbers for easy identification and replacement of components.

Note: Not all numbered parts listed in this catalogue are displayed on the Layout views.
In the interest of continued product improvement, MALMET (AUSTRALIA) reserves the right to alter specifications
without notice. E. & O. E.
Text and illustration © Copyright MALMET (AUSTRALIA) 2018
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by an information storage and retrieval system, without prior permission in writing from Malmet (Australia)

Spare Parts Catalogue

Layout – Front View

Layout – LH Side View
Layout – RH Side View
Layout – Rear View
Layout – Top View
Layout – Inside Door View

Detergent Line Assembly ES915-D/ ES935-D 91-4145SP

Detergent Line Assembly ES915-D/ ES935-D Electrical Tray 915-D/935-D

Spare Parts Catalogue

#| Part Number| Description| Diagram| #| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
1| 91-2028SP| TRAP ‘S’ ROTA| | 1A| 91-2029SP| TRAP ‘P’ ROTA| __
| | MOULDED| | | MOULDED
| | (‘ES’ AND ‘ES-D’ SERIES)| | | (‘ES’ AND ‘ES-D’ SERIES)
2| 91-2031SP| GASKET S & P TRAP| 3| 91-2032SP| CLAMPING FLANGE
| | | | | S & P
4| 91-3034SP| SPRAY PRESS LOCK| 5| 91-3035SP| SPRAY ‘T’ PRESS LOCK
| | FITTING| | | FITTING
6| 91-3048SP| STEAM FITTING MESH| 7| 91-2093SP| STEAM – IN/OUT MESH
| | NUT| | | (PK 10)
8| 82-8096SP| ADJUSTABLE FOOT &| 9| 81-4152SP| SPRAY SS 303 ¼” BIM16
| | MULTI FIT INSERT| | |
| | (NOT SOLD SEPARATELY)| | |
| 81-8046SP| HOSE SS BRAIDED| | 81-8047SP| HOSE SS BRAIDED
| | 10MM X 1500MM G¾”| | | 1500MM G½” STRAIGHT
| | STRAIGHT X G¾” 90˚| | | X G¾” 90˚ ELBOW NOT
| | ELBOW NOT SHOWN IN| | | SHOWN IN LAYOUT
| | LAYOUT| | |
12| 91-4010SP| ES-D DOOR ASSEMBLY| 13| 91-4011SP| ES-D DOOR ASSEMBLY
| | (COMPLETE WITH CRADLE,| | | (WITHOUT CRADLE, SPLASH
| | SPLASH GUARD,| | | GUARD, COUNTERSUNK
| | COUNTERSUNK SCREWS)| | | SCREWS)
| | | | | NOTE: IF DOOR IS
| | | | | REPLACED, SPLASH GUARD
| | | | | MUST ALSO BE REPLACED.
14| 91-2023SP| DOOR SPLASH GUARD| 15| 91-3053SP| LARGE CRADLE
| | | | | (‘ES’ SERIES)
#| Part Number| Description| Diagram| __

#

| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
16| 91-4015SP| DOOR AXLE ASSEMBLY| | 17| 91-3072SP| DOOR GASKET|
| | (‘ES’ AND ‘ES-D’ SERIES)| | |
18| 87-4821SP| ½” SHAFT COLLAR| 20| 91-4016SP| DOOR AXLE HINGE
| | ASSEMBLY| | | ASSEMBLY
21| 91-4155SP| STEAM GENERATOR| 21| 91-4156SP| STEAM GENERATOR
| | ASSEMBLY| | | WELD ASSEMBLY ONLY
| | (FOR 20 AMP ES-D| | | (FOR 20 AMP ES-D
| | MODELS) (COMPLETE WITH| | | MODELS)
| | ELEMENT AND| | |
| | TEMPERATURE PROBE)| | |
23| 81-2405SP| TEMPERATURE PROBE;| 24| 91-3040SP| HEATING ELEMENT
| | NUT & ¼” BRASS OLIVE| | | 4.5KW
25| 91-3114SP| HOT WATER LEVEL| 26| 8-4191SP| BRASS FITTING
| | PROBE – 3 WAY| | | THERMOCOUPLE
28| 91-4008SP| LID ASSEMBLY –| 29| 91-4004SP| COVER – ELEMENT
| | STEAM TANK| | | ELECTRICAL ASSEMBLY
30| 91-3300SP| ELEMENT 1-1/4” BSP| 21| 91-4141SP| 10 AMP STEAM
| | 2200W| | | GENERATOR ASSEMBLY
| | (10 AMP)| | | (COMPLETE WITH ELEMENT
| | | | | AND TEMPERATURE
| | | | | PROBE)
21| 91-4142SP| 10 AMP STEAM| 33| 91-4081SP| ES-D PUMP ASSEMBLY
| | GENERATOR WELDED| | | DW4-40 (COMPLETE WITH
| | SUB ASSEMBLY ONLY| | | HOSE FITTINGS)
33| 91-3014SP| ES-D PUMP DW4-40| 36| 91-3024SP| HOSETAIL 25MM HOSE X
| | | | | 1’’ BSP
#| Part Number| Description| Diagram| #| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
37| 91-4161SP| COLD WATER TANK| | 37| 91-2036SP| COLD WATER TANK|
| | ASSEMBLY| | | (TANK ONLY)
| | (FOR ‘ES’ & ‘ES-D’ SERIES)| | |
40| 91-2072SP| STEAM CONDENSER| 41| 91-2087SP| HOSE SPACER –
| | COIL| | | CONDENSING COIL
| | | | | (PK 2)
| 91-3025SP| HOSETAIL 13MM X ½”| 44| 91-3068SP| WATER SOLENOID
| | BSP MALE NOT SHOWN IN| | | VALVE 3/8”
| | LAYOUT| | | (FOR ES915 & ES935
| | | | | MODELS ONLY)
45| 91-3115SP| COLD WATER LEVEL| | 91-5220SP| ES STEAM GENERATOR
| | PROBE 4 WAY| | | 3/8 VALVE FILL LINE
| | | | | RETROFIT KIT (FOR ES910
| | | | | & ES915 MODELS) NOT
| | | | | SHOWN IN LAYOUT
51| 91-2071SP| WATER INLET TUBE| 46| 91-4091SP| COLD WATER TANK LID
| | (COLD WATER TANK)| | | ASSEMBLY
| 822-4461SP| MESH S/S 30MM X| 54| 91-4096SP| MAINS WATER INLET
| | 30MM| | | ASSEMBLY
| | (PK 10)| | | (AFTER FEBRUARY 2006
| | (PRIOR FEBRUARY 2006| | | UNIT S/N: 010600192)
| | UNIT S/N: 010600191) NOT| | |
| | SHOWN IN LAYOUT| | |
55| 91-3067SP| WATER INLET SOLENOID| 56| 91-2116SP| HOSE – TANK INLET
| | 339| | |
57| 91-2117SP| HOSE – CHAMBER| | 8-0070SP| AIRLINE FITTING 3/8” X
| | COOLDOWN| | | ¼”
| | | | | (TOP CENTRE SPRAY)
| | | | | NOT SHOWN IN LAYOUT
59| 91-4061SP| NOZZLE – ROTARY 3| 60| 91-2130SP| NOZZLE – ROTARY 3
| | SLOT ASSEMBLY| | | SLOTS (D1)
| | (ES-D SERIES)| | |
#| Part Number| Description| Diagram| #| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
61| 8-5765SP| WASHER NYLON| | 62| 8-5248SP| SCREW SHOULDER SS|
| | 16FW010125 (PK 10)| | | 8/32”
63| 91-4062SP| NOZZLE – AXLE| 64| 91-3037SP| WASHER TEFLON 25MM
| | ASSEMBLY| | | (PK 2)
65| 91-3047SP| WASHER TEFLON| 66| 91-4035SP| STEAM FITTING MESH &
| | 40OD X 30.5ID X 1.6T| | | NUT ASSEMBLY
| | (PK 2)| | |
| 91-4029SP| BOTTLE SPRAY SET| 68| 91-4027SP| RH BOTTLE SPRAY
| | LH/RH NOT SHOWN IN| | | ASSEMBLY
| | LAYOUT| | |
69| 91-4028SP| LH BOTTLE SPRAY| 70| 91-3033SP| NUT & OLIVE ¼” BSP
| | ASSEMBLY| | | CHROME PLATED
71| 8-5383SP| BACKNUT CHROMED ¾”| __ 72| 91-2079SP| HOSE – COLD WATER TO
| | BSP| | | STEAM GENERATOR
73| 91-2080SP| SPRAY LINE TO BOTTLE| 74| 91-2081SP| SPRAY LINE TO TOP
| | HOOKS| | | WASH NOZZLES
76| 91-3004SP| HOSE – COLD WATER| 77| 91-3005SP| HOSE – COLD WATER
| | TANK OVERFLOW| | | TANK TO PUMP
78| 91-3006SP| HOSE – PUMP TO SPRAY| 79| 91-3008SP| HOSE – STEAM COIL TO
| | NOZZLES| | | OVERFLOW
#| Part Number| Description| Diagram| __

#

| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
80| 91-3009SP| HOSE – OVERFLOW TO|

__

| 81| 91-3002SP| HOSE – STEAM|
| | TRAP| | | GENERATOR TO
| | | | | CHAMBER
82| 91-3003SP| HOSE – CHAMBER TO| 83| 91-3007SP| HOSE – STEAM
| | STEAM COIL| | | GENERATOR TO
| | | | | OVERFLOW
84| 91-3170SP| HOSE – HOSE BEND 180| 85| 8-5835SP| HOSE CLAMP SS
| | RUBBER| | | 25-40MM (PK 5)
86| 8-5837SP| HOSE CLAMP SS| 87| 8-5841SP| HOSE CLAMP SS
| | 32 -50MM (PK 5)| | | 16-25MM (PK 5)
88| 8-5840SP| HOSE CLAMP SS| 89| 8-5848SP| HOSE CLAMP SS
| | 50-70MM (PK 5)| | | 12-20MM (PK 5)
90| 91-4086SP| DOOR ACTUATOR| 92| 82-2361SP| MICRO SWITCH
| | ASSEMBLY| | |
93a| 91-3160SP| PCB + OTP| 93b| 91-3161SP| PCB+ OTP
| | (20 AMP ‘ES’ SERIES)| | | (20 AMP ‘ES-D’ SERIES)
93c| 91-3162SP| PCB + OTP| 93d| 91-3163SP| PCB + OTP
| | ( 10 AMP ‘ES’ SERIES)| | | ( 10 AMP ‘ES-D’ SERIES)
94| 91-3103SP| RELAY BOARD POWER| 96| 91-3106SP| HARNESS 12 WAY
| | SUPPLY PCB| | | BOARD
97| 91-3108SP| HARNESS MAIN| 98| 91-3111SP| HARNESS DOOR SWITCH
#| Part Number| Description| Diagram| #| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
99| 81-2308SP| CIRCUIT BOARD PILLAR-| | 100| 91-4036SP| TERMINAL BLOCK|
| | STANDOF (PK 5)| | | ASSEMBLY
103| 91-4068SP| FAN SUNON| 106| 91-4075SP| CONTROL PANEL
| | 80X80X25 24V DC| | | ASSEMBLY
107| 91-4076SP| FRONT PANEL WITH| 108| 82-2237SP| ES-D OVERLAY
| | OVERLAY (‘ES’ SERIES)| | |
110| 91-3102SP| DISPLAY PCB| | 91-3104SP| TRANSMITTER PCB NOT
| | | | | SHOWN IN LAYOUT
112| 91-3107SP| HARNESS DISPLAY| | 91-3109SP| HARNESS INFRA-RED
| | | | | LED DISPLAY
| | | | | NOT SHOWN IN LAYOUT
| 91-3110SP| CYCLE START LED LEAD| | 91-2041SP| EXTERNAL TOP PANEL
| | NOT SHOWN IN LAYOUT| | | NOT SHOWN IN LAYOUT
| 91-2053SP| EXTERNAL FRONT PANEL| 120| 91-4030SP| FRONT PANEL
| | NOT SHOWN IN LAYOUT| | | ASSEMBLY
| 91-4041SP| EXTERNAL SIDE PANEL| | 91-4042SP| EXTERNAL SIDE PANEL
| | RH ASSEMBLY NOT SHOWN| | | LH ASSEMBLY NOT SHOWN
| | IN LAYOUT| | | IN LAYOUT
| 91-4002SP| S TRAP REAR PANEL| | 91-4003SP| P TRAP REAR PANEL
| | ASSEMBLY NOT SHOWN IN| | | ASSEMBLY NOT SHOWN IN
| | LAYOUT| | | LAYOUT
#| Part Number| Description| Diagram| #| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
125| 81-9049SP| PUMP COLTEC| | 126| 81-9054SP| VALVE PUMP|
| | DETERGENT| | | DETERGENT
127| 91-3226SP| CHECK VALUE P/PROP-| 128| 91-3157SP| HOSE CLAMP CT10 TUBE
| | VITON ¼”| | | CLIP 10MM
129| 91-3183SP| HOSETAIL SS ¼” HOSE| | 5-30-405SP| GROMMET RUBBER ½”
| | TO M10 (1.25) MALE| | | (PK 5) A5 NOT SHOWN IN
| | | | | LAYOUT
136| 91-3153SP| BARBED ELBOW| 137| 91-3059SP| ELEMENT OVERTEMP
| | 6MM:6MM| | | SWITCH 115˚C
142| 91-4072SP| TRANSFORMER| | 91-3143SP| OTP D-Flush (special)
| | ASSEMBLY| | | NOT SHOWN IN LAYOUT
146| 92-3011SP| DETERGENT FLOW| 147| 91-3164SP| HOSE CLAMP 9-11MM
| | SENSOR – FT-210| | |
148| 91-3149SP| NUT & TAIL 6MM X ¼| 150| 81-2404SP| INTERCEPTOR PCBA
| | BSP (PLASTIC)| | | (CM111002)
151| 82-2368SP| GROMMET 5/8 RUBBER| 152| 92-2145SP| DETERGENT TUBE
| | | | | STIFFENER
#| Part Number| Description| Diagram| #| Part Number| Description| Diagram
---|---|---|---|---|---|---|---
153| 91-3126SP| DETERGENT PARALLEL| | 154| 91-3131SP| HARNESS INTERCEPTOR|
| | 24V RELAY AND| | | PCB 4-WAY
| | HARNESS| | |
| | HARNESS DISPLAY TO| | 91-3130SP| TEMPERATURE PROBE-
| | INTERCEPTOR 7 WAY| | | DUPLEX THERMISTORS
| | | | | NOT SHOWN IN LAYOUT
155| 91-3132SP| | | |
156| __ 92-4149SP| BLOCKAGE SENSOR ASSEMBLY| 157| 91-3133SP| HARNESS BLOCKAGE SENSOR DUPLEX
158| 91-5120SP| DOOR MICRO SWITCH &| | 82-3001SP| RUBBER COUPLING
| | BRACKET| | | 101MM TO 116MM NOT
| | (ES SERIES)| | | SHOWN IN LAYOUT
| 82-4800SP| RUBBER COUPLING| 130| | TUBE BEVERAGE 6MM
| | 100MM NOT SHOWN IN| 131| | CLEAR (ORDERED PER
| | LAYOUT| 132| | METRE REQUIRED TO BE
| | | 133| 82-8425SP| CUT TO LENGTH)
| | | 135| |
| | | 145| |
| 91-3098SP| OVER/TEMP PCB NOT| | 91-2078SP| HOSE – COLD WATER TO
| | SHOWN IN LAYOUT| | | STEAM GENERATOR
| | | | | (230MM – FOR ES WITH
| | | | | COPPER STEAM
| | | | | GENERATOR) NOT SHOWN
| | | | | IN LAYOUT
| 91-3159SP| MALE THREADED| | 91-5205SP| DETERGENT LINE KIT
| | ELBOW 6MM X 3/8 BSPT| | | FOR ES915-D & ES935-D
| | | | | NOT SHOWN IN LAYOUT
| | | | | DETERGENT FLOW
| | | | 91-5215SP| SENSOR RELOCATION
| | | | | KIT NOT SHOWN IN LAYOUT