3200 RAVAS Data Collector User Manual
- June 13, 2024
- RAVAS
Table of Contents
3200 RAVAS Data Collector
Product Information
- The RAVAS Data Collector (RDC) is a connectivity tool designed to transfer weight data from the RAVAS indicator to a PC or server. It allows operators to push weight data recordings over Wi-Fi to a PC where RDC software is installed.
- The received data recordings are stored in a CSV file format for further analysis and processing.
- Data integrity is ensured through a checksum, guaranteeing the accuracy and reliability of the transferred data. Even when the RAVAS indicator is out of Wi-Fi signal range, the data recordings are securely stored until a connection is reestablished.
- RAVAS Europe B.V. is the manufacturer of this product. They are located at Veilingweg 17, 5301 KM Zaltbommel, The Netherlands. For any inquiries or sales-related questions, you can contact them at the following:
- Phone: +31 418 515220
- Email: [email protected]
- Website:www.ravas.com
Please note that the use of options may affect the specifications of the
product. Any changes to specifications are reserved.
Revision Date: 2021-12-09
Product Usage Instructions
- Ensure that the RAVAS indicator and the PC with RDC software are connected to the same Wi-Fi network.
- Power on the RAVAS indicator and wait for it to establish a Wi-Fi connection.
- Launch the RDC software on the PC.
- In the RDC software, select the option to receive weight data from the RAVAS indicator.
- Once the RAVAS indicator is detected, initiate the data transfer process.
- Monitor the transfer progress on the PC and ensure that the data recordings are successfully received.
- The received data recordings will be stored in a CSV file format. Specify the desired file location and name when prompted by the RDC software.
- After the data transfer is completed, you can disconnect the RAVAS indicator from the Wi-Fi network if desired.
- To analyze and process the transferred weight data, open the CSV file using spreadsheet software or any compatible data analysis tool.
Data Collector
Transfer data from the RAVAS indicator to PC or server
- Operator is pushing weight data recordings over Wi-Fi to PC where RDC software is installed
- Received data recordings are stored in a CSV file
- Data integrity is guaranteed through a checksum
- When RAVAS indicator is out of a Wi-Fi signal range the data recordings ar stored on the device (data memory: 3200 indicator 8 records, 5200 indicator 800 records)
- Automatic data transfer of stored recordings starts the moment the RAVAS indicator has a Wi-Fi signal
- Good display of feedback information to operator
- Secured Wi-Fi connection through WPA & WPA2 PSK security
- Indicator 3200 sends Gross, Net, Tare, ID code product, ID code indicator, Date & time
- Indicator 5200 sends the same data output + max 4 configurable product codes
- Both indicators can send alibi numbers as well, when scales are used in
- Legal For Trade mode
- RAVAS Europe B.V.
- Veilingweg 17, 5301 KM Zaltbommel, The Netherlands
- T: +31 418 515220 E: [email protected]
- WWW.RAVAS.COM
- The use of options may change related specifications.
- Changes reserved rev.20211209
References
Read User Manual Online (PDF format)
Loading......