Welgo G2 Alarm Clock Radio Instruction Guide
- June 4, 2024
- Welgo
Table of Contents
Welgo G2 Alarm Clock Radio
Features
- FM Radio with Auto-scan/Manual Tuning
- Weekday/Weekend Alarm
- Adjustable Alarm/Radio Volume
- Snooze
- 12/24 Hour Time Mode
- 0-100% Dimmer of LCD Display
- Sleep Timer(In FM mode)
- Dual Charging ports
Getting Started
Plugging in for power
Plug in the adapter into a standard household outlet to get the clock working. (if the display is blank, please revolve the “Rolling Wheel”on the right panel to adjust the display brightness)
Battery Back-up Function
Insert 3 “AAA”batteries (Not Included) to preserve ALL settings in case of power interruption.
- In battery-operated mode, the batteries will drain fast, so we recommend the battery power be used in case of emergency/power outage/travel, etc. Otherwise, utilize the plug-in adapter for daily use.
- When the battery power run out and AC power outage occur,the screen display will flash or be blank,at this time you need to insert new battery.
Front Panel
Black Panel
Right Panel
- Short Press – Enter Date Setting
- Short Press – Enter Time Setting
- Short Press-Setting the WEEKDAY alarm Long Hold – Turn the WEEKDAY a larm off
- Short Press -Setting the WEEKEND alarm Long Hold – Turn the WEEKEND alarm off
- Short Press – Sleep Timer when FM is on
- Short Press – Snooze Revolve – Adjust the Date/Time/Alarm/volume
- The day of week and date
- Temperature
- The Weekday Alarm
- The Weekend Alarm
- DAM/PM Appear in 12H Mode
- Temperature Probe Hole
- Temperature Switch(“C/°F)
- FM Radio Antenna
- Charge Your Phones
- Dimmer Rolling Wheel
- Short Press-Turn the Radio On/Off
Long Hold – Aut0-scan the available FM Radio Stations
Revolve – Manual Tuning when the Radio is on.
Setting The Date
- Short press the button to enter the date setting Revolve the button to set the right MONTH.
- Short press the button to confirm the MONTH setting and set the DATE, revolve the button to set the right DATE.
- Short press thebutton to confirm the DATE and set the YEAR, Revolve the button to set the right YEAR.
- Short press the button to confirm and exit the date setting.
Setting The Time
- Short press the to enter the Time setting. Revolve to set the right HOUR.
- Short press the button to confirm the HOUR setting and set the MINUTES. Revolve the button to set the right MINUTES.
- Short press the button to confirm the MINUTES setting and enter Time Mode setting. Revolve the button to set the 12/24H mode you prefer.
- Short press the button to confirm and exit the time setting.
Setting The Weekday/Weekend Alarm
-
Short press the button to enter the Weekday Alarm setting. Revolve the to set the ALARM HOUR.
-
Short press the button to confirm the ALARM HOUR setting and set the ALARM MINUTES. Revolve the button to set the right ALARM MINUTES.
-
Short press the button to confirm ALARM MINUTES setting and enter Ring Tone Setting. Revolve the button to choose the ring tone you like.
(Note: Total 1-7 ringtone optional, 1-6 for default ringtone, 7 for FM radio which is the last station you listened) -
Short press the button to confirm ringtone setting setting and set the ALARM VOLUME, Revolve the button to set the ALARM VOLUME.
( Note : 1-16 Alarm Volume Optional, the default alarm level is Level 6)
- Short press the button to confirm and exit Weekday alarm setting
Note
- The Weekday and weekend Alarm are set in the same way.
- The alarm volume level can be adjustable when alarm is ringing OR setting the alarm.
Alarm ON/Alarm OFF
Alarm will be turned on after you set the alarm time. Io disable the alarm completely., long hold the button or button. The display will show “OFF”.
Stop The Alarm :
Short press any one button (Except the button) to stop the alarm when it’s ringing alarm will go off on the next day.
DIMMER /SNOOZE
- DIMMER : Slider the rolling wheel on the right side to adjust or turn off the backlight.
- SNOOZE : When the alarm goes off, press the button to snooze for a while and the alarm will sound again after 9 minutes.
Note
- The alarm can snooze 7 times. After the last snooze, the alarm will go silent.
- It will ring 1 hour with no action.
FM Radio Play (Auto-scan/ Manual Tuning)
Please fully extend and adjust the position of the FM antenna for better signals. If the FM signal is not very strong. Beside window and away from mobile phone, computer etc which devices with radiation.
Manual Tuning
- Press the on the right to turn the radio mode on.
- Revolve the on the right to tune and the frequency will show on the display.
- Revolve the button on the top to adjust radio volume level.
Auto-scan
- Short press the on the right to turn the radio mode on/off.
- Long press on the right for about 2 seconds, FM radio will Auto-scan the available stations . Once it finds a available station, it will stop searching and stay on the station .Long press again to search next available station.
Note:
It will play the last FM radio station you listened when the radio was turned on again. It can’t store scanned radio stations.
Thermometer
Short press the button to switch between Celsius and Fahrenheit.
Radio Sleep Timer
When radio is on, short press TIMER button to set a preset duration to turn
off the radio automatically. Default state is off.
Restore Factory Seting
If you want to reset factory settings, please disconnect the power supply and remove the battery(not incuded). Then, it will reset factory setting in next time.
Support
If you experience any problems with this clock kindly contact service@welgonow.com Issues raised will be addressed within 24 hours.
Warranty
Welgo backs 45-day money back and 12-month warranty for all products in our store.
Thanks for your purchase from Welgo. Utmost care has gone into the design and manufacturing of your clock. Please read these instructions and keep the user manual in safe place for future reference.
Instructional Video
We made a instructional video on YouTube as below link and QR code, just need to scan the code or enter the video link and you can get the Intuitive operation of the G2 radio alarm clock.
Link: https://www.youtube.com/channel/UCb8Z7emzgySBYy_J0ZZEdLQ
Frequently Asked Questions
Do you have a weekday alarm that goes off twice?
I’ve set my alarm for both the week and Saturday. I believe I read or saw something regarding the ability to choose the day for the second alarm to go off (week or weekend) I hope I was helpful, but I’m not positive.
Are the alarm and clock battery-operated? We frequently experience power outages, therefore I require a reliable clock?
Although I haven’t had to use battery backup, the alarms should function if batteries keep the clock operating.
Will the loudness of the Welgo radio alarm go up further?
My volume doesn’t change; it stays where I put it.
What’s going on with my Welgo radio-controlled clock?
Try to wind the clock. Most radio-controlled clocks have an integrated antenna that is made to pick up the signal best whether it is aimed directly at or away from Anthorn. Some clocks have a signal strength metre to help you find the best reception. If you can, change the location of your clock.
What does DST on a Welgo clock represent?
The clock display changes to reflect DST as it is displayed on the screen (summer time). To stop the daylight saving time (summer time) change, press and hold DST once more for more than 3 seconds.
How are Welgo clocks constructed?
The operation of a clock is under the control of a unique integrated circuit. A counter counts the minutes and seconds, a quartz crystal provides the cycle, a series of dividers translates the minutes and seconds to seconds, and a final circuit manages the led display, alarm, and special features. It is hardwired, thus it cannot be reprogrammed.
Which is it on my alarm—AM or PM?
The digital clock will show the time in 12-hour format with a dot in the upper left corner of the screen to indicate that it is now PM and without a dot when it is AM.
What sets pm apart from am?
The letters AM and PM stand for Ante meridiem and Post meridiem, respectively, denoting morning or early afternoon and before noon. Between midnight and noon, the first 12-hour period is referred to as AM, and between noon and midnight, the second 12-hour period is referred to as PM.
Do you utilize dots and 24-hour time?
Midnight is represented by both 00:00 and 24:00 on a 24-hour clock. In a particular time frame, 00:00 marks the start of the day and 24:00 marks its end.
What does a 12-hour clock go by?
The 12-hour clock divides a day’s 24 hours into two equal portions. The two portions are known as ante meridiem (a.m.) and post meridiem (p.m.).
What is the source of the signal used by Welgo radio-controlled clocks?
An atomic clock in a specific location sends a signal to a radio within a radio-controlled clock. The signals picked up by radio-controlled clocks in the US originate from the nearby Fort Collins, Colorado, NIST Radio Station WWVB.
What is the format for system time?
System time is used to display the date and time. The system keeps track of time, so your programmes may simply access accurate time. Coordinated universal time is used to create system time (UTC). It is accepted that the time and date at Greenwich, England, are based on UTC.
How does a Welgo radio alarm clock work?
It resembles a typical electronic clock or watch but contains two additional parts: a circuit for decoding radio signals and an antenna for picking up radio signals. The circuit determines the correct time using the radio signals and modifies the time that is displayed on the clock or watch accordingly.
What is inside an Welgo alarm clock radio?
The term for it is electromagnetic induction. The current flow in this coil is induced by this coil. In any case, the wire and cable here will carry the electricity to the alarm clock.
Why do we need Welgo alarm clocks?
Alarm clocks can be useful for maintaining regular sleep schedules. Our internal biological clocks benefit from waking up at roughly the same time each day. An alarm clock might help you maintain a regular schedule and normalize your sleep patterns.