Tianyi YJ-A-01 Smart Camera User Manual
- July 12, 2024
- Tianyi
Table of Contents
Tianyi YJ-A-01 Smart Camera User Manual
Connection Instructions
Connect tile power adapter or solar panel to charge the belter.
Installation guide
- Choose a location
Please install the camera in a location where the field of view is not blocked, and make sure that the location of the camera has a good win signal Easy instauration of solar panels, plenty of sunlight.
Voice broadcast instructions
Camera reset
Whim the Camera is powered on, press and hold the reset button for 3-5 seconds until you hear a voice prompt and a prompt sound of reset is complete, the device will be restarted soon, that is the rest is successful.
Device connection
- Download the APP
Scan the QR code below to download and install the APP.
https://www.veepai.com/veecam_download.html
-
Register and log in to the APP
(l) Please register an APP account and log in.
(2) If you have already registered, please log in directly. -
Add device
(I) Method 1: Open the mobile M’P, click the “+” in the upper rialto metro the QR code on the camera, and ct0mplete the device binding according the guidance of the mobile phone.
(2) Method 2: Open the mobile APP, please click the “+” in the upper right corner and select the QR Code not found button one select WiFi camera, and complete the device binding according to the guidance of the mobile phone.
Device sharing
Open permission of Device sharing, the person being shard can set the function of the device If the permission is turned off, you can only watch the video, and cannot set the function.
Dual lens zoom
Function
Sleep mode
FAQ
Warranty Card
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. To
maintain compliance with FCC’s RF Exposure guidelines, This equipment should
be installed and operated with minimum 20cm distance between the radiator and
your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>