PLANET POE-171A Series Single Port Multi Gigabit 802 3bt Poe Injection User Manual

POE-171A Series Single Port Multi Gigabit 802 3bt Poe Injection
User Manual

Package Contents

LED Indicators
Thank you for purchasing PLANET POE-171A and POE-176-95 single- port multi- Gigabit 802.3bt PoE++ Injector series and their brief product descriptions are shown in the table below:

Model| LAN Port Speed| PoE Standard|

PoE Budget

---|---|---|---
POE-171A-60| 10M/100M/1G/
2.5G/5Gbps| IEEE 802.3af/at/bt| 60 watts
POE-171A-95| 10M/100M/1G/
2.5G/5Gbps| IEEE 802.3af/at/bt| 95 watts
POE-176-95| 10M/100M/1G/
2.5G/5G/10Gbps| IEEE 802.3af/at/bt| 95 watts

If any item is found missing or damaged, please contact your local reseller for replacement.

• 802.3bt PoE++ injector x 1
• User’s manual x 1
• Power adaptor x 1
• AC power cord x 1
  If any item is found missing or damaged, please contact your local reseller for replacement.

Product Features

• Interface
• 2 RJ45 interfaces
• 1-port Data + Power output
• 1-port Data input
• 1 DC 52~56V input power socket
• 1 PoE mode (Standard/Legacy) DIP switch (POE-171A-60/POE-171A-95)
• 1 PoE mode (802.3bt/Force) DIP switch (POE-176-95)
• Power over Ethernet
• Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE
• Supports PoE power up to 60/95 watts for PoE port
• Auto-detection of PoE IEEE 802.3af/at/bt equipment and devices from being damaged by incorrect installation
• Monitor the status of the total PoE usage in real time
• Remote power feeding up to 100m
• Auto-detection of DC input voltage

Product Specifications

Hardware Specifications

Interface| Input Port| 1 x RJ45 STP Data In
Output Port| 1 x RJ45 STP PoE (Data + Power) Out
DC Socket| 1 x 52~56V DC input socket
Network Cable| Twisted-pair cable up to 100 meters (328ft) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6, 6A 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6, 6A 1G/2.5G: 4-pair UTP Cat 5e/Cat 6/Cat 6A/Cat 7 5G: 4-pair UTP Cat 6/Cat 6A/Cat 7
LED Indicators| System: Power x 1 (Green) PoE Port: PoE-in-Use x 1 (Amber) Legacy Mode: Legacy x 1 (Amber) PoE Usage: PoE Usage x 3 (Amber)
---|---
Data Rate| 10M/100M/1G/2.5G/5Gbps
Dimensions (W x D x H)| 94 x 70.3 x 26.2 mm
Weight| 200g| 250g
Unit Output Voltage| DC 52~56V
Power Requirements| DC 52-56V, 1.4A max.| DC 52-56V, 2.5A max
Power Consumption| 72 watts max.| 130 watts max.
No. of Devices that can be powered| 1

Power over Ethernet

PoE Standard| IEEE 802.3af/at/bt PSE
PoE Power Output Budget| DC 54V/30-watt PoE via 2-pair 54V/60-watt PoE via 4-pair| DC 54V/30-watt PoE via 2-pair DC 54V/95-watt PoE via 4-pair
PoE Power Output| Max. 60W for 1 m cable Max. 52W for 100 m cable| Max. 89.5W for 1 m cable
Max. 72W for 100 m cable
PoE Power Supply Type| End-span + Mid-span
Power Pin Assignment| Pair 1 End-span: 1/2 (-), 3/6 (+) Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE Mode| Standard: To provide power to the PD devices that follow the IEEE 802.3af/at/bt standard.
Legacy: To provide power to the PD devices that do not fully follow the IEEE 802.3af/at/bt standard. Besides, the Legacy mode supports PoH and Ultra PoE.
Force: If the output power of injector is less than 1 watt when it works in Legacy mode; after 20 seconds, the Force mode will be enabled. When the Force mode is enabled, it will provide PD with max. 60W.
If the output power of injector is less than 1 watt when it works in Force mode; after 2 seconds, the Legacy mode will be enabled.
---|---

Standards Conformance

Standards Compliance| IEEE 802.3 10BASE-T
Ethernet IEEE 802.3u
100BASE-TX Fast
Ethernet IEEE 802.3ab
1000BASE-T Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt 4-pair Power over Ethernet (Type 3)| IEEE 802.3 10BASE-T
Ethernet IEEE 802.3u
100BASE-TX Fast
Ethernet IEEE 802.3ab
1000BASE-T Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt 4-pair Power over Ethernet (Type 4)
Regulatory Compliance| FCC Part 15 Class A, CE
---|---

Environment

Operating Temperature| 0 ~ 50 degrees C
Storage Temperature| -10 ~ 70 degrees C
Operating Humidity| 5 ~ 90%, relative humidity, non-condensing
Storage Humidity| 5 ~ 90%, relative humidity, non-condensing
Product|

POE-176-95

---|---

Hardware Specifications

Interface| Input Port| 1 x RJ45 STPData In
Output Port| 1 x RJ45 STP PoE (Data + Power) Out
DC Socket| 1 x 52~56V DC input socket
Network Cable| Twisted-pair cable up to 100 meters (328ft) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6, 6A
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6, 6A 1G/2.5G: 4-pair UTP Cat 5e/Cat 6/Cat 6A/Cat 7 5G: 4-pair UTP Cat 6/Cat 6A/Cat 7 10G: 4-pair UTP Cat 6A/Cat 7
LED Indicators| System: Power x 1 (Green) PoE Port: PoE-in-Use x 1 (Amber) Force Mode: Force x 1 (Amber)
PoE Usage: PoE Usage x 3 (Amber)
Data Rate| 10M/100M/1G/2.5G/5G/10Gbps
Dimensions (W x D x H)| 94 x 70.3 x 26.2 mm
Weight| 195g
Unit Output Voltage| DC 52~56V
---|---
Power Requirements| DC 52-56V, 2.5A max
Power Consumption| 103 watts max.
No. of Devices that can be powered| 1

Power over Ethernet

PoE Standard| IEEE 802.3af/at/bt PSE
PoE Power Output Budget| DC 54V/30-watt PoE via 2-pair DC 54V/60-watt PoE via 4-pair DC 54V/95-watt PoE via 4-pair
PoE Power Output| Max. 86.8W for 1 m cable Max. 72W for 100 m cable
PoE Power Supply Type| End-span + Mid-span
Power Pin Assignment| Pair 1 End-span: 1/2 (-), 3/6 (+) Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE Mode| 802.3bt: To provide power to the PD devices that follow the IEEE 802.3af/at/bt standard. Force: When the Force mode is enabled, it will provide PD with max. 60W.

Standards Conformance

Standards Compliance| IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bz 2.5G/5G/10GBASE-T IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt 4-pair Power over Ethernet (Type 4)
Regulatory Compliance| FCC Part 15 Class A, CE

Environment

1. As the IEEE 802.3bt device provides high power, please use high-quality network cable and RJ45 connector.
2. The maximum PoE output power depends on the cable length, the quality of cable, and DC input voltage.

Product Outlook

LED Indicators:

LED| Color|

Function

---|---|---
PWR| Green| Lights to indicate the 802.3bt PoE++ injector has power.
PoE-in-Use| Amber| Lights to indicate the device is providing PoE power.
Legacy| Amber| Lights to indicate the device is working in Legacy mode.
PoE Usage| Amber| PoE Usage LED can monitor the DC input voltage or the status of the power usage.

Detection of DC input voltage of POE-171A series:
When user powers on the POE-171A injector via the DC adapter, the injector will detect the DC input voltage and then PoE Usage LED will flash three times.

LED|

Description

---|---
20W/30W| Flashing three times means the DC input voltage is 48~51V.
40W/60W| Flashing three times means the DC input voltage is 52~54V.
60W+/90W+| Flashing three times means the DC input voltage is 55~56V.

Monitoring of power usage of POE-171A-60:

LED|

Description

---|---
20W| 1. Off to indicate the PoE usage is less than 9W.
2. Blinks to indicate that the PoE usage is around 10W to 19W.3. Lights to indicate the PoE usage is more than 20W.
40W| 1. Blinks to indicate that the PoE usage is around 30W to 39W.
2. Lights to indicate the PoE usage is more than 40W.
60W+| 1. Blinks to indicate that the PoE usage is around 50W to 59W.
2. Lights to indicate the PoE usage is maximum.

Monitoring of power usage of POE-171A-95:

LED|

Description

---|---
30W| 1. Off to indicate the PoE usage is less than 14W.
2.  Blinks to indicate that the PoE usage is around 15W to 29W.
3.  Lights to indicate the PoE usage is more than 30W.
60W| 1. Blinks to indicate that the PoE usage is around 45W to 59W.
2. Lights to indicate the PoE usage is more than 60W.
90W+| 1. Blinks to indicate that the PoE usage is around 75W to 89W.
2. Lights to indicate the PoE usage is maximum.

PoE Mode:

PoE Mode|

Description

---|---
Standard| Fully conforms to the IEEE 802.3af/at/bt standard.
Legacy| The legacy detection is to identify the valid current signature of the PDs that do not fully follow the IEEE 802.3af/at/bt standard. This protects against damage to the PDs as the right PoE mode is applied.
Force| If the output power of injector is less than 1 watt when it works in Legacy mode; after 20 seconds, the Force mode will be enabled.
When the Force mode is enabled, it will provide PD with max. 60W.
If the output power of injector is less than 1 watt when it works in Force mode; after 2 seconds, the Legacy mode will be enabled.

LED Indicators:

LED| Color|

Function

---|---|---
PWR| Green| Lights to indicate the 802.3bt PoE++ injector has power.
PoE-in-Use| Amber| Lights to indicate the device is providing PoE power.
Force| Amber| Lights to indicate the device is working in Force mode.
PoE Usage| Amber| PoE Usage LED can monitor the DC input voltage or the status of the power usage.

Monitoring of power usage of POE-176-95:

LED|

Description

---|---
30W| 1. Off to indicate the PoE usage is less than 14W.
2. Blinks to indicate that the PoE usage is around 15W to 29W.
3. Lights to indicate the PoE usage is more than 30W.
60W| 1. Blinks to indicate that the PoE usage is around 45W to 59W.
2. Lights to indicate the PoE usage is more than 60W.
90W+| 1. Blinks to indicate that the PoE usage is around 75W to 89W.
2. Lights to indicate the PoE usage is maximum.

PoE Mode:

PoE Mode|

Description

---|---
802.3bt| Lights to indicate the device is working in IEEE 802.3af/at/ bt PoE mode.
Force| Lights to indicate the device is working as 4-pair 60-watt force PoE PSE.

1. After adjusting the DIP switch, the PoE port will stop and then work again.
2. Before connecting the Ethernet+DC port to network device, please make sure that it accepts PoE input to prevent damage.

Hardware Installation

The following section describes Powered Devices the hardware installation of the POE-171A series and POE-176-95. Before connecting any network device to it, please read this chapter carefully.
5.1 Before Installation
Before your installation, Data PoE+ IP Camera PoE+ Wireless AP Power RJ45 UTP Cable Data Power over Ethernet Injector Power 802.3bt PoE++ Injector 802.3bt PoE++ Splitter it is recommended to check your network environment. If there is any IEEE 802.3bt device that needs to be powered on and works normally, the POE-171A series/POE-176-95 provides you with a way out to supply power to this Ethernet device conveniently and easily. The POE-171A series/POE-176-95 is equipped with a power adaptor which is 100-240V AC input and injects DC 52~56V power into the pin of the twisted-pair cable (pair 1/2 [-], 3/6 [+] and pair 4/5 [+], 7/8 [-]).
5.2 POE-171A series/POE-176-95 Installation

1. Connect the AC power adaptor to the “52-56V DC IN” of the POE- 171A series/POE-176-95; the “PWR” LED will be steadily on. PoE Mode 802.3bt Force
2. Connect a standard Ethernet cable from an Ethernet switch or PC workstation to the “Ethernet” port of the POE-171A series/POE-176- 95.
3. Connect the long cable to the “Ethernet+DC” port of the POE-171A series/POE-176-95 and the IEEE 802.3af/at/bt PD.
4. The POE-171A series/POE-176-95, adopting the IEEE 802.3af/at/ bt technology, can directly connect with any IEEE 802.3af/at/bt end- nodes, such as PTZ (pan, tilt & zoom) network cameras, PTZ speed dome cameras, color touch screen, Voice over IP (VoIP) telephones and multi-channel wireless LAN access points as the screen in Figure 3 is shown below.

10G/5G/2.5G/1G/100Mbps Data Rate

Once the POE-171A series/POE-176-95 detects the existence of an IEEE 802.3af/at/bt device, the PoE-in-Use LED indicator will be steadily on to show it is providing power.

1. The 10Gbps speed is available for the POE-176-95 only.
2. Since the PoE port of the POE-171A series/POE-176-95 supports 52-56V DC PoE power output, please check and assure the PD accepts DC power range of 52-56V DC. Otherwise, it will damage the PD.

Customer Support

Thank you for purchasing PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq?method=category&c1=2
Support team mail address: [email protected]
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

FCC Warning

This designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the Instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.
PLANET Technology Corp.
10F. No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
Warning: This device is compliant with Class A of CISPR 32. In a residential environment this device may cause radio interference.
2350-AF0620-005

www.PLANET.com.tw

Documents / Resources

| PLANET POE-171A Series Single Port Multi Gigabit 802 3bt Poe Injection [pdf] User Manual
POE-171A Series Single Port Multi Gigabit 802 3bt Poe Injection, POE-171A Series, Single Port Multi Gigabit 802 3bt Poe Injection, Gigabit 802 3bt Poe Injection, 3bt Poe Injection, Poe Injection, Injection
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>