ADJ 190-00011 Flat Panel TV Wall Mount Instruction Manual
- June 13, 2024
- ADJ
Table of Contents
FLAT PANEL TV WALL MOUNT
INSTRUCTION MANUAL cod. 190-00011
190-00011 Flat Panel TV Wall Mount
NOTE: We recommend that this product is installed by the professional
only. we accept no liability for damages caused by incorrect assembly,
installation or use. If there is any doubt, please contact the specialist from
the seller for help.
IMPORTANT!
- For safety reasons, the wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced.
- Safety gear and proper tools must be used. Failure to do so can result in property damage and/or serious injury.
- Make sure that no electrical cables, water pipes or gas pipes are located within the wall.
Tools required for the installation:
- Head Screw Driver
- Electric or Portable Drill
- 1/5” (5 mm) Drill Bit + Stud Finder ( Drywall Installation )
- 2/5” (10mm) Masonry Bit ( Concrete Installation )
Also make sure that all of the hardware has been included with your mount.You should find the following:
(A) M6x50 Lag Bolt X 4|
---|---
(D) M6 Washer X8|
(G) Allen Wrench X1|
(B) Concrete Anchor X 4|
(E) M6x12 Bolt X 4|
(C) M8x12 Bolt X 4|
(F) M4x12 Bolt X4|
Installing the Wall Mount
Made in China – Distributed by loT Tecnologie s.r.l.
Via della Faeta, 1 – 00030 San Cesareo (RM) – ITALY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>