NordicTrack NTL17122.5 Commercial 2450 Treadmill User Manual
- June 13, 2024
- NordicTrack
Table of Contents
- NTL17122.5 Commercial 2450 Treadmill
- USER’S MANUAL
- REGISTER YOUR PRODUCT
- MEMBER CARE
- WARNING DECAL PLACEMENT
- IMPORTANT PRECAUTIONS
- STANDARD SERVICE PLANS
- BEFORE YOU BEGIN
- PART IDENTIFICATION CHART
- ASSEMBLY
- HOW TO USE THE TREADMILL
- CONSOLE DIAGRAM
- HOW TO TURN ON THE POWER
- HOW TO USE THE TOUCH SCREEN
- HOW TO SET UP THE CONSOLE
- HOW TO USE THE MANUAL MODE
- HOW TO CREATE A DRAW-YOUR-OWN-MAP WORKOUT
- HOW TO USE AN IFIT WORKOUT
- HOW TO CHANGE CONSOLE SETTINGS
- HOW TO CONNECT TO A WIRELESS NETWORK
- THE OPTIONAL HEART RATE MONITOR
- FCC INFORMATION
- HOW TO FOLD AND MOVE THE TREADMILL
- HOW TO MOVE THE TREADMILL
- HOW TO LOWER THE TREADMILL FOR USE
- MAINTENANCE AND TROUBLESHOOTING
- TROUBLESHOOTING
- SYMPTOM: The power turns off during use
- SYMPTOM: The walking belt slows when walked on
- SYMPTOM: The walking belt is off-center or slips when walked on
- SYMPTOM: The displays of the console do not function properly
- EXERCISE GUIDELINES
- HOW TO MEASURE YOUR HEART RATE
- WORKOUT GUIDELINES
- EXERCISE FREQUENCY
- EXPLODED DRAWING A Model No. NTL17122.5 R1221B
- EXPLODED DRAWING B
- EXPLODED DRAWING C
- EXPLODED DRAWING D
- ORDERING REPLACEMENT PARTS
- LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NTL17122.5 Commercial 2450 Treadmill
USER’S MANUAL
Model No. NTL17122.5
Serial No.
Write the serial number in the space
above for reference.
REGISTER YOUR PRODUCT
To register your product and
activate your warranty today, go
to my.nordictrack.com.
MEMBER CARE
For service at any time, go to
my.iFIT.com.
Or call 1-833-680-IFIT
(1-833-680-4348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
WARNING DECAL PLACEMENT
This drawing shows the locations of the warning decals. If a decal is missing
or illegible,
call the telephone number on the front cover of this manual and request a free
replacement decal.
Apply the decal in the location shown.
Note: The decals may not be shown at actual size.
NORDICTRACK and IFIT are registered trademarks of iFIT Inc. The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license. Wi-Fi is a registered trademark of Wi-Fi Alliance. WPA and WPA2 are trademarks of Wi-Fi Alliance.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. IF IT assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
-
It is the responsibility of the owner to ensure that all users of the treadmill are adequately informed of all warnings and precautions.
-
Keep children under age 16 and pets away from the treadmill at all times.
-
Consult your health care provider before beginning any exercise program. This is especially important for persons over age 35 or persons with pre-existing health problems.
-
Consult your health care provider before beginning or continuing any exercise program during pregnancy. Use the treadmill only as authorized by your health care provider.
-
The treadmill is not intended for use by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the treadmill by someone responsible for their safety.
-
Use the treadmill only as described in this manual.
-
The treadmill is intended for home use only. Do not use the treadmill in any commercial, rental, or institutional setting.
-
Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.
-
Place the treadmill on a level surface, with at least 8 ft. (2.4 m) of clearance behind it and 2 ft. (0.6 m) on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
-
Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
-
The treadmill should be used only by persons weighing 300 lbs. (135 kg) or less.
-
Never allow more than one person on the treadmill at a time.
-
Wear appropriate exercise clothes while using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.
-
Plug the power cord into a surge suppressor (not included), and plug the surge suppressor into an appropriate outlet (see page 17). To avoid overloading the circuit, do not plug other electrical devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit.
-
Use only a surge suppressor that meets all of the specifications described on page 17. To purchase a surge suppressor, see your local NORDICTRACK dealer, call the telephone number on the front cover of this manual, or see your local electronics store.
-
Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate, or stop unexpectedly, which may result in a fall and serious injury.
-
Keep the power cord and the surge suppressor away from heated surfaces.
-
Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See MAINTENANCE AND TROUBLESHOOTING on page 30 if the treadmill is not working properly.)
-
Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on
page 19). Always wear the clip while using the treadmill. -
Be careful when mounting and dismounting the treadmill. Always stand on the foot rails when starting or stopping the walking belt. Always hold the handrails while using the treadmill.
-
When a person is walking on the treadmill, the noise level of the treadmill will increase.
-
Keep fingers, hair, and clothing away from the moving walking belt.
-
The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.
-
Never leave the treadmill unattended while it is running. Always remove the key, press the power switch into the off position (see the drawing on page 6 for the location of the power switch), and unplug the power cord when the treadmill is not in use.
-
Do not attempt to move the treadmill until it is properly assembled. (See ASSEMBLY on page 8 and HOW TO FOLD AND MOVE THE TREADMILL on page 29.) You must be able to safely lift 45 lbs. (20 kg) to move the treadmill.
-
When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. Do not operate the treadmill while it is folded.
-
Do not change the incline of the treadmill by placing objects under the treadmill.
-
Never insert any object into any opening on the treadmill.
-
Inspect and properly tighten all parts each time the treadmill is used. Replace any worn parts immediately. Use only manufacturer-supplied parts.
-
DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.
-
Over exercising may result in serious injury or death. If you feel faint, if you become short of breath, or if you experience pain while exercising, stop immediately and cool down.
SAVE THESE INSTRUCTIONS
STANDARD SERVICE PLANS
BEFORE YOU BEGIN
Thank you for selecting the new NORDICTRACK®
COMMERCIAL 2450 treadmill. The COMMERCIAL 2450 treadmill provides an
impressive selection of features designed to make your workouts at home more
effective and enjoyable.
For your benefit, read this manual carefully before you use the treadmill. If
you have questions after reading this manual, please see the front cover of
this manual. To help us assist you, note the product model number and serial
number before contacting us. The model number and the location of the serial
number decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with the parts that are
labeled in the drawing below.
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra parts may be included.
ASSEMBLY
1. To use the assembly steps in this manual, first see the helpful tips below.
- Assembly requires two persons.
- Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.
- After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner.
- Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.
- To identify small parts, see page 7.
- Assembly requires the following tools:
the included hex keys
one Phillips screwdriver
one adjustable wrench
To avoid damaging parts, do not use power tools.
2. Make sure that the power cord is unplugged.
Identify the Right Upright (114), and lay it near the Base (118) as shown.
Next, connect the Belly Pan Wire (96) to the Upright Wire (120) in the Right
Upright (114). The connectors should slide together easily and snap into place
with an audible click. If they do not, turn one connector and try again.
Next, insert the Wires (96, 120) into the indicated square hole (A), and press
the Grommet (97) into the square hole.
Then, remove and discard the indicated screw (B), and attach the ground wire
(C) to the Right Upright (114) with a Ground Screw (5).
3. Have a second person hold the Right Upright (114) against the Base (118).
Make sure not to pinch the Belly Pan Wire (96).
Insert two 3/8″ x 2 3/4″ Screws (2) with two 3/8″ Star Washers (9) into the
top of the bracket on the Right Upright (114), and partially tighten the
Screws into the Base (118); do not fully tighten the Screws yet.
Then, partially tighten two 3/8″ x 1 1/4″ Screws (1) with two 3/8″ Star
Washers (9) into the side of the bracket on the Right Upright (114); do not
fully tighten the Screws yet.
Attach the Left Upright (not shown) in the same way. Note: There are no wires
on the left side.
4. Do not pinch the Wires (119, 120) during this step. With the help of a
second person, hold the handrail assembly (D) on the Left and Right Uprights
(113, 114). Attach the handrail assembly with four 3/8″ x 2 3/4″ Screws (2)
and four 3/8″ Star Washers (9); start all four Screws, and then tighten them.
Next, connect the Handrail Wire (119) to the Upright Wire (120). The
connectors should slide together easily and snap into place with an audible
click. If they do not, turn one connector and try again. Then, insert the
wires into the Right Upright (114).
5. Identify the Right Inner Console Base Cover (105). Note: If the Right
Inner Console Base Cover is preassembled, go to step 6.
Insert the edge (Q) of the Right Inner Console Base Cover (105) under the edge
of the Right Upright Inner Cover (104) as you press the Right Inner Console
Base Cover against the handrail assembly (D).
See the inset drawing. Make sure that the wires (119, 120) are inserted under
the four indicated bosses (N).
Attach the Right Inner Console Base Cover (105) with two #8 x 3/4″ Screws (4);
start both Screws, and then tighten them. Do not overtighten the Screws.
Attach the Left Inner Console Base Cover (not shown) to the left side of the
handrail assembly (D) in the same way. Note: There is not a wire on the left
side.
6. Identify the Right Inner Grip (102), and attach it to the right side of
the handrail assembly (D) with four #8 x 3/4″ Screws (4); start all four
Screws, and then tighten them. Do not overtighten the Screws.
Attach the Left Inner Grip (101) to the left side of the handrail assembly (D)
in the same way.
7. See the inset drawing. Make sure that the wires (119, 120) are inserted
under the four indicated bosses (N). Do not pinch the wires during this step.
Identify the Right Outer Grip (103), and press it onto the handrail assembly
(D) and the Right Upright (114) as shown. Note: The nine indicated tabs (O)
must slide into the corresponding square holes (P) in the Right Outer Grip.
Then, tighten a #8 x 3/4″ Screw (4) into the Right Outer Grip (103) in the
location shown.
Attach the Left Outer Grip (not shown) to the left side of the treadmill in
the same way.
8. Have a second person hold the console assembly (E) near the handrail
assembly (D).
Connect the wires (F) from the console assembly (E) to the wires (G) from the
handrail assembly (D). The connectors should slide together easily and snap
into place with an audible click. If they do not, turn one connector and try
again.
Do not pinch the wires (F, G) during this step. Insert the wires into the
handrail assembly (D) as you set the console assembly (E) on the handrail
assembly. Make sure that the console assembly is properly oriented so that the
curved edge (L) of the Console Pivot Bracket (138) faces the front (M) of the
handrail assembly.
Attach the console assembly (E) with two M6 x 25mm Screws (8); do not fully
tighten the Screws yet.
9. Rotate the console assembly (E) so that it faces the opposite direction.
Tighten two M6 x 25mm Screws (8) into the Console Pivot Bracket (138); start
both Screws, and then firmly tighten them.
Next, identify the Left Pivot Cover (136). Attach the Left Pivot Cover to the
Console Pivot Bracket (138) with an M4 x 20mm Screw (6); do not overtighten
the Screw.
10. Rotate the console assembly (E) back to its original position. Firmly
tighten the two M6 x 25mm Screws (8) that you attached in step 8.
Next, identify the Right Pivot Cover (137). Attach the Right Pivot Cover to
the Console Pivot Bracket (138) with an M4 x 20mm Screw (6); do not
overtighten the Screw.
11. Rotate the console assembly (E) to the position shown.
Next, identify the Left and Right Trays (141, 142).
Orient the Left Tray (141) as shown. Next, peel the backing (A) off the
adhesive pad on the Left Tray. Then, press the Left Tray onto the handrail
assembly (D) until it snaps into place (see the inset drawing).
Attach the Right Tray (142) in the same way.
12. Note: If the treadmill is assembled on a smooth surface, it may roll
forward during this step.
Raise the Frame (74) to the position shown. IMPORTANT: Do not raise the Frame
past the vertical position. Have a second person hold the Frame until step 14
is completed.
Remove the two 5/16″ x 1 1/4″ Screws (26) from the Latch Crossbar (76). Note:
The Latch Crossbar is not preattached to the treadmill.
Next, orient the Latch Crossbar (76) as shown. Make sure that the “This side
toward belt” sticker (H) is facing the treadmill. Attach the Latch Crossbar to
the brackets (I) on the Frame (74) with the two 5/16″ x 1 1/4″ Screws (26)
that you just removed and two 5/16″ Star Washers (7).
13. Remove the 5/16″ Nut (49) and the 5/16″ x 1 3/4″ Bolt (25) from the
bracket on the Base (118).
Next, orient the Storage Latch (75) as shown.
Attach the lower end of the Storage Latch (75) to the bracket on the Base
(118) with the 5/16″ x 1 3/4″ Bolt (25) and the 5/16″ Nut (49).
Then, raise the Storage Latch (75) to a vertical position, and remove the tie
(J).
14. Remove the 5/16″ Nut (49) and the 5/16″ x 2 1/4″ Bolt (27) from the
bracket on the Latch Crossbar (76).
Next, align the upper end of the Storage Latch (75) with the bracket on the
Latch Crossbar (76), and insert the 5/16″ x 2 1/4″ Bolt (27) through the
bracket and the Storage Latch. This will push a spacer (K) out of the Storage
Latch; discard the spacer.
Next, tighten the 5/16″ Nut (49) onto the 5/16″ x 2 1/4″ Bolt (27). Do not
overtighten the Nut; the Storage Latch (75) must be able to pivot.
Then, lower the Frame (74) (see HOW TO LOWER THE TREADMILL FOR USE on page
29).
15. Firmly tighten the two 3/8″ x 2 3/4″ Screws (2) and the two 3/8″ x 1 1/4″
Screws (1) in the Right Upright (114).
Repeat this step on the left side of the treadmill.
16. See HOW TO CONNECT THE POWER CORD on page 17, and plug in the power cord.
Then, see HOW TO USE THE MANUAL MODE on page 21, and adjust the incline of the
treadmill to 10%.
Next, identify the Right Base Cover (121). Position the large cutout (I) in
the Right Base Cover around the Right Upright (114), and slide the Right Base
Cover downward onto the Base (118). Make sure that the Belly Pan Wire (96) is
on top of the Right Base Cover as shown in the inset drawing.
Then, slide the Left Base Cover (not shown) onto the left side of the
treadmill. Note: There are no wires on the left side of the treadmill.
17. Make sure that all parts are properly tightened before you use the
treadmill. If there are sheets of plastic on the treadmill decals, remove the
plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep
the included hex keys in a secure place; one of the hex keys is used to adjust
the walking belt (see pages 31 and 32). Note: Extra hardware may be included.
To register your product and activate your warranty today, go to
my.nordictrack.com.
HOW TO USE THE TREADMILL
HOW TO CONNECT THE POWER CORD
Use a Surge Suppressor
Your treadmill, like other electronic equipment, can be damaged by sudden
voltage changes in your home’s power. Voltage surges, spikes, and noise
interference can result from weather conditions or from other appliances being
turned on or off. To decrease the risk of damaging the treadmill, always use a
surge suppressor (A) with the treadmill. To purchase a surge suppressor, see
precaution 15 on page 3.
Use only a surge suppressor (A) that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must have a UL suppressed
voltage rating of 400 volts or less and a minimum surge dissipation of 450
joules. The surge suppressor must also be electrically rated for 120 volts AC
and 15 amps. There must be a monitoring light on the surge suppressor to
indicate whether it is functioning properly. Failure to use a properly
functioning surge suppressor could result in damage to the control system of
the treadmill and serious injury to users.
Plug in the Power Cord
The treadmill must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. The treadmill power cord (B) has a plug with a
grounding pin (C) (see drawing 1 on this page).
DANGER: Improper connection of the power cord increases the risk of electric shock. Do not modify the plug—if it will not fit an outlet, have a proper outlet installed by a qualified electrician. If you are unsure whether the treadmill is properly grounded, contact a qualified electrician.
Plug the power cord (B) into a surge suppressor (A), and plug the surge suppressor into an appropriate outlet (D) that is properly installed and grounded in accordance with all local codes and ordinances. The outlet must be on a nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit. IMPORTANT: If the treadmill is connected to an AFCI-equipped outlet and your circuit breaker trips repeatedly when the treadmill is used, see the front cover of this manual to purchase an arc filter.
A temporary adapter (E) may be used to connect the surge suppressor (A) to a 2-pole receptacle (F) if a properly grounded outlet is not available.
The lug (G) or wire extending from the adapter must be connected with a metal screw (H) to a permanent ground such as a properly grounded outlet box cover. Some 2-pole receptacle outlet box covers are not grounded. Before using an adapter, contact a qualified electrician to determine whether the outlet box cover is grounded. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician.
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The advanced treadmill console offers a selection of features designed to make
your workouts more effective and enjoyable.
The console features wireless technology that enables the console to connect
to iFIT. With iFIT, you can access a large and varied workout library. Each
workout automatically controls the speed and incline of the treadmill as an
iFIT trainer guides you through an effective exercise session. You can also
create your own workouts, track your workout results, and access many other
features.
When you use the manual mode of the console, you can change the speed and
incline of the treadmill with the touch of a button. As you exercise, the
console will display instant exercise feedback.
You can even measure your heart rate when you use a compatible heart rate
monitor. See page 28 to purchase a heart rate monitor.
To turn on the power, see page 19. To learn how to use the touch screen, see
page 19. To set up the console, see page 20.
HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components.
Plug in the power cord (see page 17). Next, locate the power switch on the
treadmill frame near the power cord. Press the power switch into the reset
position (I).
Next, stand on the foot rails of the treadmill. Locate the clip (J) attached
to the key (K), and slide the clip securely onto the waistband of your
clothes. Then, insert the key into the console. Note: It may take some time
for the console to be ready for use. IMPORTANT: In an emergency, the key can
be pulled from the console, causing the walking belt to slow to a stop. Test
the clip by carefully taking a few steps backward; if the key is not pulled
from the console, adjust the position of the clip.
Note: The console can display speed and distance in either miles or
kilometers. To find which unit of measurement is selected, see HOW TO CHANGE
CONSOLE SETTINGS on page 25. For simplicity, all instructions in this section
refer to miles.
HOW TO USE THE TOUCH SCREEN
The console features a tablet with a full-color touch screen. The following information will help you become familiar with the tablet’s advanced technology:
- The console functions similarly to other tablets. You can slide or flick your finger against the screen to move certain images on the screen, such as the displays in a workout (see step 5 on page 21). However, you cannot zoom in and out by sliding your fingers on the screen.
- The screen is not pressure sensitive. You do not need to press hard on the screen.
- To type information into a text box, first touch the text box to view the keyboard. To use numbers or other characters on the keyboard, touch ?123. To view more characters, touch ~[<. Touch ?123 again to return to the number keyboard. To return to the letter keyboard, touch ABC. To use a capital character, touch the shift button (upward-facing arrow symbol). To use multiple capital characters, touch the shift button again. To return to the lowercase keyboard, touch the shift button a third time. To clear the last character, touch the clear button (backward-facing arrow with an X symbol).
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the console.
1. Connect to your wireless network.
T o access the internet, download iFIT workouts, and use several other
features of the console, you must connect the console to a wireless network.
Follow the prompts on the screen to connect the console to your wireless
network.
2. Customize settings.
Fill in the form on the screen to set the console to display the desired unit
of measurement and your time zone. Note: If you need to change these settings
later, see HOW TO CHANGE CONSOLE SETTINGS on page 25.
3. Log into or create an iFIT account.
Provide your email address, and follow the prompts on the screen to sign up
for or log into your iFIT account.
4. Check for firmware updates.
First, touch the menu button (three horizontal lines symbol), touch Settings,
touch Maintenance, and then touch Update. The console will check for firmware
updates. See step 5 on page 26 for more information.
5. Calibrate the incline system.
First, touch the menu button (three horizontal lines symbol), touch Settings,
touch Maintenance, touch Calibrate Incline, and then touch Begin to calibrate
the incline system. See step 6 on page 26 for more information.
The console is now ready for you to begin working out. The following pages explain the various workouts and other features that the console offers.
To use the manual mode, see page 21. To use a featured workout, see page 22. To create a draw-your-own-map workout, see page 23. To use an iFIT workout, see page 24.
To view or change console settings, see page 25. To connect to a wireless network, see page 27.
IMPORTANT: If there are sheets of plastic on the console, remove the plastic. To prevent damage to the walking platform, wear clean athletic shoes while using the treadmill. The first time you use the treadmill, observe the alignment of the walking belt, and center the walking belt if necessary (see page 31).
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 19. Note: It may take some time for the
console to be ready for use.
2. Select the home screen.
When you turn on the console, the home screen will appear on the screen after
the console boots up.
If you are in a workout, touch the screen and follow the prompts to end the
workout and return to the home screen. If you are in the settings menus, touch
the back button (arrow symbol) to return to the home screen.
Note: If you plan to use a wearable heart rate monitor with the console, you must put on the heart rate monitor before you start the walking belt. The console will automatically search for the heart rate monitor for 30 seconds when you start the walking belt at the beginning of each workout. See page 28 for information about purchasing a wearable heart rate monitor.
3. Start the walking belt and adjust the speed.
T ouch Manual Start on the screen or press the Start button on the console to
start the walking belt. The walking belt will begin to move at a low speed. As
you exercise, change the speed of the walking belt as desired by pressing the
speed increase and decrease buttons. Each time you press one of the buttons,
the speed setting will change by 0.1 mph; if you hold down the button, the
speed setting will change in increments of 0.5 mph.
If you press one of the numbered speed buttons, the walking belt will gradually change speed until it reaches the selected speed setting.
4. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the incline increase and
decrease buttons or one of the numbered incline buttons. Each time you press
one of the buttons, the incline will gradually change until it reaches the
selected incline setting.
Note: If the walking belt is moving at a high speed and you adjust the incline below 0%, the speed of the walking belt may automatically decrease.
IMPORTANT: The first time you use the treadmill, you must calibrate the incline system (see step 6 on page 26).
5. Monitor your progress with the display modes.
While you walk or run on the treadmill, a selection of workout information
will be displayed:
• The incline level of the treadmill
• The elapsed time
• The approximate number of calories you have burned
• The distance that you have walked or run
• The speed of the walking belt
Additional information is also available. To view or browse additional statistics and charts, swipe down from the top of the screen. You can also touch the + button on the screen to view stats or charts. Note: If you wear a compatible heart rate monitor (see page 28), your heart rate will also be displayed.
If desired, adjust the volume by pressing the volume buttons on the console.
To stop the walking belt, press the Stop button or tap the screen and touch the pause symbol. To restart the walking belt, press the Start button or touch the play symbol on the screen.
6. Turn on the fan if desired.
The fan features several speed settings. Press the fan buttons repeatedly to
select a fan speed or to turn on or turn off the fan.
7. When you are finished exercising, remove the key from the console.
Step onto the foot rails and press the Stop button on the console or tap the
screen and touch the pause symbol. Then, touch the stop symbol on the screen
or press the Stop button again. A workout summary will appear on the screen.
If you wish to save your workout for future use, you can add it as a favorite
by touching the heart icon on the screen. You may also be able to either save
or publish your results using one of the options on the screen. Touch Finish
to exit to the home screen. Then, remove the key from the console and put it
in a secure place.
When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmill’s electrical components may wear prematurely.
HOW TO USE A FEATURED WORKOUT
Note: To use a featured workout, the console must be connected to a wireless network (see HOW TO CONNECT TO A WIRELESS NETWORK on page 27).
1. Insert the key into the console.
See HOW
TO TURN ON THE POWER on page 19. Note: It may take a few moments for the
console to be ready for use.
2. Select the home screen or the workout library.
When you turn on the console, the home screen will appear after the console
boots up.
If you are in a workout, touch the screen and follow the prompts to end the
workout and return to the home screen. If you are in the settings menus, touch
the back button (arrow symbol) to return to the home screen.
Touch the buttons at the bottom of the screen to select either the home screen
(Home button) or the workout library (Browse button).
3. Select a workout.
To select a workout from the home screen or the workout library, simply touch
the desired workout button on the screen. Slide or flick the screen to scroll
as necessary.
The featured workouts on your console will change periodically. To save one of
the featured workouts for future use, you can add it as a favorite by touching
the favorites button (heart symbol). You must be logged into your iFIT account
to save a featured workout (see step 3 on page 24).
To draw your own map for a workout, see HOW TO CREATE A DRAW-YOUR-OWN-MAP
WORKOUT on page 23.
When you select a workout, the screen will show an overview of the workout
that includes details such as the duration and distance of the workout and the
approximate number of calories you will burn during the workout.
4. Start the workout.
Touch Start Workout to start the workout.
During some workouts, an iFIT
coach will guide you through a video workout. Tap the screen to select
separate music, trainer voice, and volume options for the workout.
During some workouts, the screen will show a map of the route and a marker
indicating your progress. Touch the buttons on the screen to select the
desired map options.
If the speed or incline is too high or too low, you can press the increase or
decrease buttons to activate Smart Adjust and scale the intensity of the
workout. To return to the programmed settings of the workout, touch the
screen, and then turn off Smart Adjust.
Note: The calorie goal shown in the workout description is an estimate of the
number of calories that you will burn during the workout. The actual number of
calories that you burn will depend on various factors, such as your weight. In
addition, if you manually change the speed or incline during the workout, the
number of calories you burn will be affected.
To follow your progress with the display modes, see step 5 on page 21.
To pause the workout, simply touch the screen and touch the pause symbol. To
continue the workout, touch the play symbol.
To end the workout, touch the screen to pause the workout, and then follow the
prompts on the screen to end the workout and return to the home screen.
When the workout ends, a workout summary will appear on the screen. If
desired, you can select options such as adding the workout to your schedule
(see HOW TO USE AN IFIT WORKOUT on page 24) or adding the workout to your
favorites list. Then, touch Finish to return to the home screen.
5. Use headphones if desired.
Turn on your Bluetooth® headphones and place them near the console. Then touch
Connect to Audio Device and select your headphones from the list on the
screen.
When your headphones and the console pair successfully, the audio from the
console will play through your headphones.
6. Follow your progress.
See step 5 on page 21.
7. Turn on the fan if desired.
See step 6 on page 22.
8. When you are finished exercising, remove the key from the console.
HOW TO CREATE A DRAW-YOUR-OWN-MAP WORKOUT
Note: To create a draw-your-own-map workout, the console must be connected to a wireless network (see HOW TO CONNECT TO A WIRELESS NETWORK on page 27). An iFIT account is also required.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 19.
2. Select a draw your own map workout.
To select a draw your own map workout, touch Create on the screen.
3. Draw your map.
Navigate to the area on the map where you want to draw your workout by sliding
your fingers on the screen. Tap the screen to add the start point for your
workout. Then, tap the screen to add the end point for your workout. Note: If
you want to start and end the workout at the same point, use the Close Loop or
Out & Back options. You can also select whether you want your workout to snap
to the road.
If you make a mistake, you can touch Undo.
The screen will display the elevation and distance for your workout. If
desired, you can change the default speed.
4. Save your workout.
Touch Save New Workout on the screen. If desired, change the title of the
workout or add a description.
5. Start the workout.
Touch Start Workout on the screen to start the workout. A moment after you
touch the button, the walking belt will begin to move. Hold the handrails and
begin walking. See step 4 on page 23 for more information.
6. Follow your progress.
See step 5 on page 21.
7. Turn on the fan if desired.
See step 6 on page 22.
8. When you are finished exercising, remove the key from the console.
See step 7 on page 22.
HOW TO USE AN IFIT WORKOUT
To use an iFIT workout, the console must be connected to a wireless network (see HOW TO CONNECT TO A WIRELESS NETWORK on page 27). An iFIT account is also required.
1. Add workouts to your schedule on iFIT.com.
On your computer
, smartphone, tablet, or other device, open an internet browser, go to
iFIT.com, and log in to your iFIT account.
Next, navigate to Menu > Library on the website. Browse the workout programs
in the library and join the desired workouts.
Then, navigate to Menu > Schedule to view your schedule. All of the workouts
that you have joined will appear on your schedule; you can arrange or delete
the workouts on your schedule as desired.
Take time to explore the iFIT.com website before you log out.
2. Select the home screen.
When you turn on the console, the home screen will appear on the screen after
the console boots up.
If you are in a workout, touch the screen and follow the prompts to end the
workout and return to the home screen. If you are in the settings menus, touch
the back button (arrow symbol) to return to the home screen.
3. Log in to your iFIT account.
If you have not already done so, touch the menu button (three horizontal lines
symbol) on the screen and then touch Log in to log in to your iFIT account.
Follow the prompts on the screen to enter your username and password.
To switch users within your iFIT account, touch the menu button, touch
Settings, and then touch Manage Accounts. If more than one user is associated
with the account, a list of users will appear. Touch the name of the desired
user.
4. Select an iFIT workout that you have previously added to your schedule on
iFIT.com.
IMPORT
ANT: Before iFIT workouts will load, you must add them to your schedule on
iFIT.com (see step 1).
To load an iFIT workout from iFIT.com to the console, touch the Calendar
button at the bottom of the screen.
When you load a workout, the screen will show an overview of the workout that
includes details such as the duration and distance of the workout and the
approximate number of calories you will burn during the workout.
5. Start the workout.
Touch Start Workout on the screen to start the workout. A moment after you
touch the button, the walking belt will begin to move. Hold the handrails and
begin walking. See step 4 on page 23 for more information.
6. Use headphones if desired.
T urn on your Bluetooth® headphones and place them near the console. Then
touch Connect to Audio Device and select your headphones from the list on the
screen.
When your headphones and the console pair successfully, the audio from the
console will play through your headphones.
7. Follow your progress.
See step 5 on page 21.
8. Turn on the fan if desired.
See step 6 on page 22.
9. When you are finished exercising, remove the key from the console.
See step 7 on page 22.
For more information about iFIT, go to iFIT.com.
HOW TO CHANGE CONSOLE SETTINGS
IMPORTANT: Some of the settings and features described may not be enabled. Occasionally, a firmware update may cause your console to function slightly differently.
1. Select the settings menu.
First, turn on the power and insert the key into the console (see HOW TO TURN
ON THE POWER on page 19). Note: It may take a few moments for the console to
be ready for use.
Next, select the home screen. When you turn on the console, the home screen
will appear on the screen after the console boots up. If you are in a workout,
tap the screen, touch the pause symbol, touch the stop symbol, and then touch
Finish to return to the home screen.
Next, touch the menu button (three horizontal lines symbol), and then touch
Settings. The settings menu will appear on the screen.
2. Navigate the settings menus and change settings as desired.
Slide or flick the screen to scroll upward or downward if necessary. To view a
settings menu, simply touch the menu name. To exit a menu, touch the back
button (arrow symbol). You may be able to view and change settings in the
following settings menus:
Account
• My Profile
• In Workout
• Manage Accounts
Equipment
• Equipment Info
• Equipment Settings
• Maintenance
• Wi-Fi
About
• Legal
3. Customize the time zone and other settings.
To customize the time zone or other settings, touch Equipment Settings and
then touch the desired settings.
4. View machine information.
Touch Equipment Info to view app or machine info or to change the unit of
measurement.
The console can display speed and distance in either standard or metric units
of measurement.
5. Update the console firmware.
For the best results, regularly check for firmware updates. Touch Maintenance,
and then touch Update to check for firmware updates using your wireless
network. The update will begin automatically. IMPORTANT: To avoid damaging the
console, do not turn off or unplug the treadmill while the firmware is being
updated.
The screen will show the progress of the update. When the update is complete,
the treadmill will turn off and then turn back on. If it does not, use the
power switch (see HOW TO
TURN ON THE POWER on page 19) to turn the treadmill off, wait for a few seconds, and then turn it back on again.
Note: It may take a few minutes for the console to be ready for use.
Note: Occasionally, a firmware update may cause the console to function slightly differently. These updates are always designed to improve your exercise experience.
6. Calibrate the incline system of the treadmill.
Touch Calibrate Incline, and then touch Begin to calibrate the incline system.
The treadmill will automatically rise to the maximum incline level and then
return to the starting position. This will calibrate the incline system. When
the incline system is calibrated, touch Finish. Note: Occasionally, the
incline calibration may run automatically when you turn on the treadmill.
IMPORT
ANT: Keep pets, feet, and other objects away from the treadmill while the
incline system is calibrating. In an emergency, pull the key from the console
to stop the incline calibration.
7. Exit the settings menu.
If you are in a settings menu, touch the back arrow to exit.
HOW TO CONNECT TO A WIRELESS NETWORK
The console is Wi-Fi enabled, allowing you to set up a wireless network
connection.
1. Select the home screen.
See step 2 on page 21.
2. Select the wireless network menu.
Touch the menu button (three horizontal lines symbol), and then touch the Wi-
Fi® symbol to enter the wireless network menu.
3. Enable Wi-Fi.
Make sure that Wi-Fi is enabled. If it is not, touch the Wi-Fi toggle to
enable a wireless connection.
4. Set up and manage a wireless network connection.
When Wi-Fi is enabled, the screen will show a list of available networks.
Note: It may take several seconds for the list of wireless networks to appear.
Note: You must have your own wireless network and an 802.11b/g/n router with
SSID broadcast enabled (hidden networks are not supported).
When a list of networks appears, touch the desired network. Note: You will
need to know your network name (SSID). If your network has a password, you
will also need to know the password.
An information box will ask if you want to connect to the wireless network.
Touch Join to connect to the network or touch Cancel to return to the list of
networks. If the network has a password, touch the password entry box. A
keyboard will appear on the screen. To view the password as you type it, touch
the Show Password checkbox.
To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 19.
When the console is connected to your wireless network, a checkmark will
appear next to the wireless network name.
To disconnect from a wireless network, touch and hold the name of the wireless
network and then touch Forget.
If you are having problems connecting to an encrypted network, make sure that your password is correct. Note: Passwords are case-sensitive.
Note: The console supports unsecured and secured (WEP, WPA™, and WPA2™)
encryption. A broadband connection is recommended; performance depends on
connection speed.
Note: If you have questions after following these instructions, go to
support.iFIT.com for assistance.
5. Exit the wireless network menu.
To exit the wireless network menu, touch the back arrow on the screen.
THE OPTIONAL HEART RATE MONITOR
Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the best results is to maintain the proper heart rate during your workouts. The optional heart rate monitor will enable you to continuously monitor your heart rate while you exercise, helping you to reach your personal fitness goals. To purchase a heart rate monitor, please see the front cover of this manual.
Note: The console is compatible with Bluetooth® Smart heart rate monitors.
FCC INFORMATION
This console has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
IMPORTANT: To satisfy exposure compliance requirements, the antenna and transmitter in the console must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other antenna or transmitter.
Note: The console contains FCC ID: OMC415325
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
To avoid damaging the treadmill, adjust the incline to zero before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.
1. Hold the metal frame (A) firmly in the location shown by the arrow below.
CAUTION: Do not hold the frame by the plastic foot rails. Bend your legs and keep your back straight.
2. Raise the frame (A) until the storage latch (B) locks in the storage position. CAUTION: Make sure that the storage latch locks.
To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85°F (30°C).
HOW TO MOVE THE TREADMILL
Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the storage latch is in the locked position. Moving the treadmill requires two people. Take any necessary measures to protect your floor
1. Hold the frame (A) and one of the handrails (C), and place one foot
against a wheel (D).
2. Pull back on the handrail until the treadmill will roll on the wheels, and
carefully move it to the desired location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame, and do not move the
treadmill over an uneven surface.
3. Place one foot against a wheel, and carefully lower the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1. Push the upper end of the frame forward, and gently press the upper part
of the storage latch with your foot at the same time.
2. While pressing the storage latch with your foot, pull the upper end of the
frame toward yourself.
3. Step back and let the frame lower to the floor.
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE
Regular maintenance is important for optimal performance and to reduce wear.
Inspect and properly tighten all parts each time the treadmill is used.
Replace any worn parts immediately. Use only manufacturer-supplied parts.
Regularly clean the treadmill and keep the walking belt clean and dry. First, press the power switch into the off position and unplug the power cord. Wipe exterior parts of the treadmill with a damp cloth and a small amount of mild soap.
IMPORTANT: Do not spray liquids directly onto the treadmill. To avoid damage to the console, keep liquids away from the console. Then, thoroughly dry the treadmill with a soft towel.
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.
SYMPTOM: The power does not turn on
a. Make sure that the power cord is plugged into a surge suppressor and that the surge suppressor is plugged into a properly grounded outlet (see page 17). Use only a surge suppressor that meets all of the specifications described on page 17. IMPORTANT: If the treadmill is connected to an AFCI-equipped outlet and your circuit breaker trips repeatedly when the treadmill is used, see the front cover of this manual to purchase an arc filter.
b. After the power cord has been plugged in, make sure that the key is inserted into the console.
c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes as shown (A), the switch has tripped. To reset the power switch, wait for five minutes and then press the switch back in (B).
SYMPTOM: The power turns off during use
a. Check the power switch (see drawing c above). If the switch has tripped,
wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in. If the power cord is plugged
in, unplug it, wait for five minutes, and then plug it back in.
c. Remove the key from the console, and then
reinsert it.
d. If the treadmill still will not run, please see the front cover of this
manual.
SYMPTOM: The incline of the treadmill does not change correctly
a. See step 6 on page 26 to calibrate the incline system.
SYMPTOM: The treadmill will not connect to the wireless network
a. Make sure that the wireless settings on the console are correct (see page
27).
b. Make sure that the settings for your wireless network are correct.
c. If you still have questions, go to support.iFIT.com.
SYMPTOM: The walking belt slows when walked on
a. Use only a surge suppressor that meets all of the specifications described
on page 17.
b. If the walking belt is overtightened, treadmill performance may decrease
and the walking belt may become damaged. Remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller screws (C) counterclockwise,
1/4 of a turn. When the walking belt is properly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking
platform. Pinch near the foot rail (D) to expose and lift the edge of the
walking belt (see the inset drawing). Make sure to tuck the edge of the
walking belt back under the foot rail after checking the tension. Be careful
to keep the walking belt centered. Then, plug in the power cord, insert the
key, and walk on the treadmill for a few minutes. Repeat until the walking
belt is properly tightened.
c. Your treadmill features a walking belt coated with high-performance
lubricant. IMPORTANT: Never apply silicone spray or other substances to the
walking belt or the walking platform unless instructed to do so by an
authorized service representative. Such substances may deteriorate the walking
belt and cause excessive wear. If you suspect that the walking belt needs more
lubricant, see the front cover of this manual.
d. If the walking belt still slows when walked on, see the front cover of this
manual.
SYMPTOM: The walking belt is off-center or slips when walked on
a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is centered. The walking belt is centered when both edges are covered by the foot rails (D).
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform (see drawing b on page 31). Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
SYMPTOM: The displays of the console do not function properly
a. If the console does not boot up properly, or if the console freezes and does not respond, reset the console to the factory default settings. IMPORTANT: Doing this will erase all of the custom settings you have made to the console. Resetting the console requires two people. First, press the power switch into the off position. Next, locate the small reset opening (E) on the top of the console. Using a bent paper clip (F), press and hold the reset button inside the opening, and have a second person press the power switch into the on (reset) position. Continue holding the reset button (E) until the console turns on. When the reset operation is complete, the console will turn off and then turn back on. If it does not, use the power switch to turn the treadmill off and then on again. Once the console turns on, check for firmware updates (see step 5 on page 26). Note: It may take a few minutes for the console to be ready for use.
EXERCISE GUIDELINES
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems.
These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your cardiovascular system,
exercising at the proper intensity is the key to achieving results. You can
use your heart rate as a guide to find the proper intensity level. The chart
below shows recommended heart rates for fat burning and aerobic exercise.
To find the proper intensity level, find your age at the bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your age define your “training zone.” The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise.
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone.
Aerobic Exercise—If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone.
HOW TO MEASURE YOUR HEART RATE
To measure your heart rate, exercise for at least four minutes. Then, stop exercising and place two fingers on your wrist as shown. Take a six-second heartbeat count, and multiply the result by 10 to find your heart rate. For example, if your six-second heartbeat count is 14, your heart rate is 140 beats per minute.
WORKOUT GUIDELINES
Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in
your training zone. (During the first few weeks of your exercise program, do
not keep your heart rate in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exercise; never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases
the flexibility of your muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life.
PART LIST
Model No. NTL17122.5 R1221B
Key No. Qty. Description
PART LIST
Model No. NTL17122.5 R1221B
1 4 3/8″ x 1 1/4″ Screw
2 8 3/8″ x 2 3/4″ Screw
3 1 Incline Stop Bracket
4 70 #8 x 3/4″ Screw
5 1 Ground Screw
6 2 M4 x 20mm Screw
7 2 5/16″ Star Washer
8 4 M6 x 25mm Screw
9 12 3/8″ Star Washer
10 10 #8 x 3/4″ Tek Screw
11 18 #8 x 5/8″ Flat Head Screw
12 3 1/4″ x 2 1/2″ Screw
13 20 #8 x 1/2″ Washer Head Screw
14 4 M3 x 12mm Screw
15 8 #4 Screw
16 4 M4 x 14mm Screw
17 4 3/8″ Plastic Bushing
18 1 3/8″ x 1 1/2″ Bolt
19 1 3/8″ x 1 3/4″ Bolt
20 4 #8 Belt Guide Screw
21 4 M4 x 10mm Screw
22 4 M6 x 15mm Screw
23 4 M6 x 20mm Screw
24 2 5/16″ Drive Motor Screw
25 5 5/16″ x 1 3/4″ Bolt
26 2 5/16″ x 1 1/4″ Screw
27 1 5/16″ x 2 1/4″ Bolt
28 2 3/8″ x 1 3/8″ Screw
29 8 #10 x 3/4″ Screw
30 4 Rubber Cushion
31 7 #8 x 3/4″ Truss Head Screw
32 4 1/4″ x 1″ Screw
33 2 1/2″ x 3″ Screw
34 2 3/8″ x 1 1/16″ Screw
35 4 M8 Washer
36 2 #8 Washer
37 14 Deck Rail Washer
38 4 M8 x 15mm Screw
39 2 M8 x 23mm Screw
40 2 M10 x 40mm Screw
41 1 1″ Plastic Washer
42 1 1″ Thrust Washer
43 2 1/2″ Thrust Washer
44 2 1/2″ Plastic Washer
45 2 3/8″ Thrust Washer
46 6 M8 Star Washer
47 2 1/2″ Nut
48 6 3/8″ Nut
49 6 5/16″ Nut
50 5 1/4″ Nut
Key No. Qty. Description
51 5 Clip
52 1 M25 Nut
53 2 M10 Nut
54 2 1/2″ Plastic Bushing
55 8 Fan Screw
56 2 Rear Foot
57 1 Rear Endcap
58 1 Key Clip
59 4 Platform Cushion
60 1 Walking Platform
61 1 Walking Belt
62 1 Left Foot Rail
63 1 Right Foot Rail
64 2 Belt Guide
65 1 Power Supply Bracket
66 1 Power Supply
67 1 Front Roller/Pulley
68 1 Motor Belt
69 2 Frame Hood Mount
70 6 Cable Tie
71 1 Incline Controller Bracket
72 1 Incline Controller
73 4 Plastic Stand-off
74 1 Frame
75 1 Storage Latch
76 1 Latch Crossbar
77 1 Drive Motor
78 2 Rear Wheel
79 1 Idler Roller
80 2 Foot Rail Tab
81 1 Warning Decal
82 1 Hood
83 1 Incline Motor
84 2 Incline Frame Spacer
85 2 Incline Frame Cap
86 1 Incline Frame
87 2 Incline Motor Spacer
88 1 Motor Controller
89 2 Wheel
90 1 Electronics Bracket
91 2 Hood Mount
92 1 Power Cord
93 1 Power Cord Grommet
94 1 Power Switch
95 1 Belly Pan
96 1 Belly Pan Wire
97 2 Grommet
98 1 Left Inner Console Base Cover
99 1 Left Upright Inner Cover
100 1 Left Outer Grip
Key No. Qty. Description
101 1 Left Inner Grip
102 1 Right Inner Grip
103 1 Right Outer Grip
104 1 Right Upright Inner Cover
105 1 Right Inner Console Base Cover
106 1 Left Handrail
107 1 Right Handrail
108 1 Console Crossbar
109 1 Crossbar Top Cover
110 1 Crossbar Bottom Cover
111 1 Left Upright Cover
112 1 Right Upright Cover
113 1 Left Upright
114 1 Right Upright
115 10 Mushroom Fastener Insert
116 34 Mushroom Fastener
117 5 Base Foot
118 1 Base
119 1 Handrail Wire
120 1 Upright Wire
121 1 Right Base Cover
122 1 Left Base Cover
123 3 Console Wire Tie
Key No. Qty. Description
124 1 Console Base Cover
125 1 Upper Console Cover
126 1 Lower Console Cover
127 1 Console Back Plate
128 2 Saddle Bracket
129 1 Pivot Cover
130 1 Console
131 2 Fan
132 1 Pivot Front Cover
133 1 Pivot Back Cover
134 2 Metal Spacer
135 1 Plastic Spacer
136 1 Left Pivot Cover
137 1 Right Pivot Cover
138 1 Console Pivot Bracket
139 1 Fan Cover
140 1 Console Base
141 1 Left Tray
142 1 Right Tray
143 2 Caution Decal
144 8 #8 x 5/8″ Screw
- – User’s Manual
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
EXPLODED DRAWING A Model No. NTL17122.5 R1221B
EXPLODED DRAWING B
EXPLODED DRAWING C
EXPLODED DRAWING D
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help
us assist you, be prepared to provide the following information when
contacting us:
• the model number and serial number of the product (see the front cover of
this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST
and the EXPLODED DRAWING near the end of this manual)
LIMITED WARRANTY
IMPORTANT: To protect your fitness equipment with an extended service plan, see page 5.
iFIT Inc. (iFIT) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The frame is warranted for ten (10) years from the date of purchase. Parts are warranted for two (2) years from the date of purchase. Labor is warranted for one (1) year from the date of purchase.
This warranty extends only to the original purchaser (customer) and is not transferrable. iFIT’s obligation under this warranty is limited to repairing or replacing, at iFIT’s discretion, the product through one of its authorized service providers. All repairs for which warranty claims are made must be preauthorized by iFIT. If replacement parts are shipped while the product is under warranty, the customer will be responsible for a minimal handling charge. For in-home service, the customer may be responsible for a minimal trip charge. This warranty does not extend to freight damage to the product. This warranty will automatically be voided by the following conditions: (1) if the product is used as a store display model, (2) if the product is purchased or transported outside the USA, (3) if any instruction or warning in this manual is not followed, (4) if the product is abused or improperly or abnormally used, (5) if the product is modified to alter functionality or capability without the written permission of iFIT, or (6) if the product is used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by iFIT.
iFIT is not responsible or liable for the following damages: (1) indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; (2) damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or (3) other consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all other warranties,
and any implied warranties of merchantability or fitness for a particular
purpose are limited in their scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts.
Accordingly, the above limitation may not apply to the customer. This warranty
provides specific legal rights; the customer may have other rights that vary
from state to state.
For warranty service, please call the telephone number on the front cover of
this manual. Please be prepared to provide the model number and serial number
of the product (see the front cover of this manual).
iFIT Inc., 1500 S. 1000 W., Logan, UT 84321-9813
References
- MemberCenter
- Product Registration
- NordicTrack Exercise Equipment | Treadmills, Bikes, & More
- MemberCenter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>