ACCU-CHEK QSG A/C Blood Glucose Meter User Guide

: June 13, 2024
: ACCU-CHEK

Table of Contents

QSG A/C Blood Glucose Meter
Overview
Set Language and Time Format
Set Up the Lancing Device
Perform a Blood Glucose Test
Documents / Resources

START HERE
QUICK START GUIDE
Roche

QSG A/C Blood Glucose Meter

To find diabetes management apps that are compatible with your meter, visit www.accu-chek.com.
WARNING
Risk of life-threatening injuries Keep new and used batteries away from children.
See the User’s Manual for additional information.
Risk of a serious health incident
This Quick Start Guide does not replace the User’s Manual for your Accu-Chek Guide blood glucose meter. The User’s Manual contains important handling instructions and additional information.
Risk of infection
While obtaining a blood drop, the lancing device and cap may come into contact with blood. The lancing device is for single patient use only and should not be shared.
NOTE

Always have a spare set of batteries.
Battery life may vary due to factors such as temperature and battery manufacturer.

Overview

ACCU CHEK QSG A C Blood Glucose Meter - Overview

Display
Back Button
Up Arrow and Down Arrow Buttons
Power/Set/OK Button
Test Strip Slot with Light
Battery Door
Micro USB Port
Test Strip Ejector

Set Language and Time Format

Turn the meter on by briefly pressing .
Language appears. Press or to highlight the desired language. Press . Time Format appears. Press or to highlight 12 hour (am/pm) or 24 hour. Press to set the
option and return to Main Menu.

Set Up the Lancing Device

ACCU CHEK QSG A C Blood Glucose Meter - Format 1 Familiarize yourself with the Accu-Chek Softclix lancing device.Remove the lancing device cap by pulling it straight off. Do not twist the cap.
Insert a lancet into the lancing device until it clicks. Twist off the lancet’s protective cap.Place the cap back on the lancing device. Make sure the notch on the cap lines up with the notch on the lancing device.
Adjust the lancet depth to a comfortable penetration depth. Start at 2. For tougher skin, rotate to a higher number. ACCU CHEK QSG A C Blood Glucose
Meter - Format 6 Press the priming button in as far as it will go, like a pen. Do not press the release button while pressing the priming button.
The release button turns yellow when the lancing device is ready. Set the lancing device aside until you are ready to perform a fingerstick.

Perform a Blood Glucose Test

ACCU CHEK QSG A C Blood Glucose Meter - Format 7 Wash and dry your hands before you perform a blood glucose test.
Check the use by date on the test strip container. Do not use test strips past the use by date. Remove a test strip from the test strip container. Close the cap tightly.Insert the metallic end of the test strip into the meter.
The meter turns on. Preparing to test appears. ACCU CHEK QSG A C Blood
Glucose Meter - Format 10 Press the lancing device firmly against the side of your fingertip and press the yellow release button to poke your fingertip.
Touch the yellow edge of the test strip to the blood drop. Do not put blood on top of the test strip. ACCU CHEK QSG A C Blood Glucose Meter - Format
11 Remove your finger from the test strip when Analyzing appears.
The test result appears on the display in less than 4 seconds. Remove the lancing device cap.
Point the lancet away from you.
Slide out the ejector to release the lancet.

LAST UPDATE: 2021-07
Roche Diabetes Care GmbH
Sandhofer Strasse 116
68305 Mannheim, Germany
www.accu-chek.com
ACCU-CHEK, ACCU-CHEK GUIDE, and SOFTCLIX are
trademarks of Roche.
© 2021 Roche Diabetes Care
07439881061A-1021
07439881061(01)-1021 07439881061