Jumpflex PROJAM Hero Series Basketball Hoop Instruction Manual

: June 13, 2024
: Jumpflex

Table of Contents

Jumpflex PROJAM Hero Series Basketball Hoop Instruction Manual
PROJAM™ Parts List
Setup Options
High Mount Assembly Instructions
Low Mount Assembly Instructions
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Jumpflex PROJAM Hero Series Basketball Hoop Instruction Manual

Jumpflex PROJAM Hero Series Basketball Hoop.JPG

Warning: Read all assembly, installation, care maintenance and usage instructions in the manual prior to assembling and using the Jumpflex® product.
These products are for personal use only by one person aged 6 years and older.
These products are for outdoor use only.
Warning: For domestic use only. Adult assembly required.
Risk Warning: The use of this product involves a significant risk of participants suffering personal injury, including the possibility of serious injuries, permanent disability or death. All participants who engage in activities with the product do so at their own risk.

PROJAM™ Parts List

FIG 1 PROJAM™ Parts List.JPG

FIG 2 PROJAM™ Parts List.JPG

Setup Options

High Mount
High mount option, ideal for big jumpers and big air slam dunks! Please follow assembly instructions on page 6.

FIG 3 High Mount.JPG

Low Mount
Low mount option, compatible with SMARTSHADE™ sun cover and great for little jumpers. Please follow assembly instructions on page 17.

FIG 4 Low Mount.JPG

High Mount Assembly Instructions

Lay the Backboard and Hoop (1) face down.

Step 1

FIG 5 High Mount Assembly Instructions.JPG

Step 2

FIG 6 High Mount Assembly Instructions.JPG

Step 3

Thread one connected fibreglass rod assembly through the webbing loop on the backboard and into the bottom corner pocket.

FIG 7 High Mount Assembly Instructions.JPG

Step 4

Repeat step 03 on the other side.

FIG 9 High Mount Assembly Instructions.JPG

Step 5

FIG 10 High Mount Assembly Instructions.JPG

Insert each end of the fibreglass rods into the High Mount Cross Bracket (4) as shown.

Step 6

Thread another fibreglass rod assembly into the High Mount Cross Bracket (4) and insert the other end into the corner pocket.

FIG 11 High Mount Assembly Instructions.JPG

Step 7

Repeat step 6 on the other side.

FIG 12 High Mount Assembly Instructions.JPG Pull the corner of the backboard away from the center and pre-bend the fibreglass rod to create enough space to insert the rod into the corner pocket.

Step 8

Attaching to your Jumpflex® Trampoline

FIG 13 High Mount Assembly Instructions.JPG

FIG 14 High Mount Assembly Instructions.JPG

Step 9

Clip the backboard carabiners through the safety net to secure the bottom corners in place.

FIG 15 High Mount Assembly Instructions.JPG

Step 10

Adjust the hoop straps to ensure the hoop is sitting horizontally.

Step 11

FIG 17 High Mount Assembly Instructions.JPG

Use the provided Ball Pump (9) to inflate the Basketball (8).

Low Mount Assembly Instructions

FIG 18 Low Mount Assembly Instructions.JPG

FIG 19 Low Mount Assembly Instructions.JPG

FIG 22 Low Mount Assembly Instructions.JPG

FIG 24 Low Mount Assembly Instructions.JPG

FIG 26 Low Mount Assembly Instructions.JPG

Thread 1x fibre glass rod assembly through 1x Low Mount Pole Strap (7) as shown.

FIG 27 Low Mount Assembly Instructions.JPG

FIG 28 Low Mount Assembly Instructions.JPG

Pull the corner of the backboard away from the center and pre-bend the fibreglass rod to create enough space to insert the rod into the corner pocket.

FIG 30 Low Mount Assembly Instructions.JPG