Campagnolo CMDL2022S01 Rear Derailleur and Crankset with Power Meter Instructions
- June 13, 2024
- Campagnolo
Table of Contents
Campagnolo CMDL2022S01 Rear Derailleur and Crankset with Power Meter
Product Information
The product is a bicycle component manufactured by Campagnolo srl. It includes the following parts:
- Rear Derailleur: 0102950
- Front Derailleur: 0105200
- Ergopower Commands: 0139050/1/2/3/4/5
- Rear Derailleur: 0800397/8/9; 0800400/1/2; 0803400/1/2;
0804400/1/2
This product also includes a rear derailleur and crankset with a power meter.
The company’s address is Via della Chimica 4 – 36100 Vicenza (ITALIA).
Regional Regulatory Information
The product complies with the following regional regulations:
- Europe: IT BG ES CS DA DE ET GR EN FR HR LV LT HU MT NL PL PT RO SK SL FI SV
- UK (Great Britain): The full text of the UK declaration of conformity is available at www.campagnolo.com
- USA: Rear and front derailleur contains FCC ID: 2AAQS-ISP1807,Crankset with Power meter contains FCC ID: 2AAQS ISP1507, Left Ergopower command FCC ID: 2A7OG CMDL2022S01, Right Ergopower command FCC ID: 2A7OG CMDR2022S01
- Canada: Rear and front derailleur contains IC: 11306A-ISP1807, Crankset with Power meter contains IC: 11306A-ISP1507, Left Ergopower command IC: 28812-CMDL2022S01, Right Ergopower command
IC: 28812-CMDR2022S01
Product Usage Instructions
To use the product, follow these instructions:
- Ensure that the product is properly installed on the bicycle according to the manufacturer’s guidelines.
- Refer to the user manual for specific instructions on adjusting and fine-tuning the rear and front derailleurs.
- If using the crankset with a power meter, follow the additional instructions provided in the user manual to set up and calibrate the power meter.
- For operating the Ergopower commands, familiarize yourself with their functions and operation by referring to the user manual.
- Before operating the equipment, make sure it complies with the regulatory requirements of your region.
- Observe the FCC/IC radiation exposure limits and guidelines mentioned in the user manual for safe usage of the product.
- Do not make any changes or modifications to the product that are not expressly approved by the manufacturer, as it may void your authority to operate the equipment.
If you have any questions or encounter any issues with the product, refer to the user manual or contact Campagnolo srl for assistance.
REGIONAL REGULATORY INFORMATION
REAR DERAILLEUR: 0102950
ERGOPOWER COMMANDS: 0139050/1/2/3/4/5
FRONT DERAILLEUR: 0105200
REAR DERAILLEUR: 0800397/8/9; 0800400/1/2; 0803400/1/2; 0804400/1/2
The full text of the UK declaration of conformity is available at the following internet address: www.campagnolo.com
FCC STATMENT
USA
Rear and front derailleur
Contains FCC ID: 2AAQS-ISP1807
Crankset with Power meter
Contains FCC ID: 2AAQS ISP1507
Left Ergopower command
FCC ID: 2A7OG CMDL2022S01
Right Ergopower command
FCC ID: 2A7OG CMDR2022S01
“This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION!
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.”
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has very low levels of RF energy that it deemed
to comply without maximum permissive exposure evaluation (MPE).
CANADA
Rear and front derailleur
Contains IC: 11306A-ISP1807
Crankset with Power meter
Contains IC: 11306A-ISP1507
Left Ergopower command
IC: 28812-CMDL2022S01
Right Ergopower command
IC: 28812-CMDR2022S01
“This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Information: This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>