HARMAN MGU21 High 4 Head MGU Infotainment System Instruction Manual
- June 13, 2024
- Harman
Table of Contents
HARMAN MGU21 High 4 Head MGU Infotainment System
Product Information
- Model: MGU21A
- Brand: BMW
- Version: 1.3
- Date: 2022-01-27
- Manufacturer: Harman Becker Automotive Systems GmbH
- Manufacturer Address: Becker-Goering-Strasse 16, 76307 Karlsbad, Germany
Product Usage Instructions
To use the MGU21A Infotainment System, please follow the instructions below:
- Ensure that the device is properly installed in your vehicle according to the vehicle’s user manual.
- Power on the MGU21A Infotainment System.
- Use the touchscreen or physical controls to navigate through the system’s menus and options.
- To connect your smartphone via Bluetooth, go to the Bluetooth settings and follow the pairing instructions.
- If you want to connect to a wireless network, go to the WLAN settings and select your network. Enter the necessary credentials if prompted.
- The MGU21A Infotainment System supports GPS functionality. To use GPS navigation, open the navigation app and follow the on-screen instructions.
Please note that for detailed information about compliance and declarations of conformity, refer to the links provided in the user manual.
Declaration of Conformity (DoC)
Hereby, Harman Becker Automotive Systems GmbH declares that the radio equipment type MGU 21A is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet Address: (*1)
Used Frequency spectrum
- Bluetooth: 2,402-2,480 GHz <10dBm
- WLAN: 2,4 GHz (2,4 GHz – 2,49 GHz) <10dBm
- WLAN: 5 GHz (5,725 GHz – 5,875 GHz) <14dBm
- WLAN: 5 GHz (5,150 GHz – 5,250 GHz) <14dBm
- GPS: 1559 – 1610 MHz (Receiving only) ————
Manufacturer
Harman Becker Automotive Systems GmbH Becker-Goering-Strasse 16
76307 Karlsbad, Germany
Modification statement
The party responsible for the compliance has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
Wireless notice:
This device complies with FCC/ISED radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS‐102 of the ISED radio frequency (RF) Exposure rules. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This device will be installed into specific carlines,
with an antenna configuration that as worst case will be at a minor distance
of 5.10 cm from the end user.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de classe B est conforme à la norme canadienne ICES-003.
FCC Class B digital device notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.
- Consult the dealer or an experienced radio/TV technician for help.
Interference statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesiredoperation of the device.
This radio transmitter 6434A-MGU21A has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Permitted Antenna
This radio transmitter has been approved by the ISED to operate with the
antenna types listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with
this device.
| Interface and frequency range (MHz) | Type | Max Gain |
|---|---|---|
| 2400-2495; 5150-5850 | λ/4; 5/8 λ Monopole | -2.5 dBi for 2.4 GHz Band |
-2.8 dBi for 5 GHz Band
Target market CHINA:
China Restriction of certain Hazardous Substances (China RoHS)
| Part name | Toxic and hazardous substances and elements |
|---|---|
| Pb | Hg |
| Chassis | 0 |
| connectors | 0 |
| PCB ASY | 0 |
Pollution control label
Target market Mexico:
- Modelo: MGU21A
- Marca: BMW
Materials
MGU21A infotainment system está em conformidade com os mais recentes lançamentos de directivas RoHS (2002/95/EC) e ELV (2000/53/EC), e também o regulamento REACH (CE) No. 1907/2006. Marcação de polímero partes acc. a VDA 260, respectivamente EN ISO 1043. Declaration of Conformity to RED regulation
Target market Bolivia:
MGU21A: Dimensions/Dimensiones: 200mm x 160mm x 39.5mm
Weight/peso: 644.3 gr
Target market Ukraine
Documents / Resources
|
HARMAN MGU21 High 4 Head MGU Infotainment
System
[pdf] Instruction Manual
MGU21A, MGU21 High 4 Head MGU Infotainment System, High 4 Head MGU
Infotainment System, MGU Infotainment System, Infotainment System
---|---