Pyle PDIC1661RD 2-Way Home Speaker System User Manual
- June 13, 2024
- Pyle
Table of Contents
Pyle PDIC1661RD 2-Way Home Speaker System
Introduction
Pyle, a well-renowned brand in the audio world, presents the PDIC1661RD, a 2-way in-ceiling/in-wall speaker system. Designed for seamless integration into your home or office space, these speakers promise a combination of high- quality sound without compromising aesthetics. They come with a focus on easy installation and offer a perfect fit for those who seek a clutter-free audio solution.
Product Specifications
- Brand : Pyle
- Model Name : PDIC1661RD
- Speaker Type : Surround Sound
- Connectivity Technology : Wired
- Special Feature : Speaker
- Waterproof : No
Technical Specs
- Power Output : Up to 200 Watts
- Impedance : 16 Ohms
- Sensitivity : 88 dB
- Frequency Response : 70Hz-20kHz
- Total Unit Dimensions (Diameter x Depth) : 9.0” x 3.1”
- Cutout Diameter : 7.6”
- Cutout Mounting Depth : 2.8”
- Speaker Material : Nature Friendly ABS Construction
- Speaker Cone : 6.5” Reinforced Polypropylene
- Tweeter : 1/2” High Compliance Polymer
- Edge : Rubber Edge
Physical Dimensions
- Product Dimensions : 9.5 x 8 x 10 inches
- Single Speaker Weight : 5.5 lbs.
- Total Weight (for the pair) : 5.36 lbs.
- Item Weight : 4.15 pounds
Other Features
- Flush Mount Design (In-Wall / In-Ceiling System)
- Stain-Resistant Built-in Grills
- Quick Connect Spring-Loaded Speaker Terminals
- Changeable Round and Square Grills
- Easy Installation with Cut-Out Size Template
Box Contents
Upon unboxing, users will find two 6.5-inch speakers ready for installation.
Product Key Features
- Seamless Integration : The speaker system is designed for in-ceiling or in-wall installation, making it perfect for existing home theater setups. This provides stereo sound without using any floor or shelf space.
- Easy Installation : The speakers come with a cut-out size template and quick-connect spring-loaded terminals for hassle-free setup.
- Stain-Resistant Speaker Grill : The built-in round speaker grills are designed to be stain-resistant, ensuring a clean look over time.
- Flush Mount Design : The compact design allows for installation in-wall or in-ceiling, providing a streamlined appearance on any flat surface.
- High-Quality Sound Production : It features a pair of 6.5” reinforced polypropylene cones with suspension cloth and a 1/2” High Compliance Polymer Tweeter for consistent and enhanced sound reproduction.
- Nature-Friendly ABS Construction : The speakers are constructed with eco-friendly ABS material.
- Changeable Grills : Depending on your preference or room aesthetics, you can opt for either round or square grills, which are included.
- Quick Connection : The system is equipped with spring-loaded speaker terminals for quick and efficient connectivity.
- Maximum Power Output : The speakers have a max power output of 200 Watts, providing powerful sound.
- Wide Frequency Response : With a frequency response range of 70Hz-20kHz, the speakers can produce a broad spectrum of sounds from deep bass to high trebles.
- Satisfaction Guaranteed : Pyle offers a satisfaction guarantee with a full refund within the first 30 days and a limited 1-Year manufacturer warranty.
These features emphasize the Pyle PDIC1661RD’s focus on delivering high- quality sound while maintaining a discreet presence in any room. The combination of easy installation, robust audio performance, and flexible design options makes it a worthy addition to any home audio setup.
Installation Instructions
Installing the Pyle PDIC1661RD 2-Way Home Speaker System is designed to be a straightforward process, thanks to its flush mount design and provided accessories. Here’s a step-by-step guide to assist you:
- Location Selection :
- Determine where you want to install the speakers. Ideally, the location should be away from any wall studs, electrical wires, or plumbing to prevent any issues.
- For optimal sound dispersion, try to install them at an equal distance from your primary listening position and from each other.
- Marking the Cut-out Area :
- Place the provided cut-out size template on the wall or ceiling where you want the speaker to go.
- Trace around the template using a pencil to mark the cut-out area.
- Cutting :
- Use a drywall saw or a similar tool to carefully cut along the traced line.
- Make sure to wear safety goggles to protect your eyes from any dust or debris.
- Remove the cut-out piece and set it aside.
- Wire Connection :
- Strip the ends of your speaker wire to expose the copper strands.
- Insert the positive (+) wire into the red spring-loaded terminal and the negative (-) wire into the black terminal on the back of the speaker.
- Press down on the spring-loaded terminal, insert the wire, and release to secure it in place.
- Installing the Speaker :
- Carefully push the speaker into the cut-out hole until it sits flush against the wall or ceiling.
- Tighten the screws on the front of the speaker. As you do this, the clamps on the back of the speaker will rotate and clamp down onto the backside of the wall or ceiling, holding the speaker securely in place.
- Attach the Grill :
- Once the speaker is secure, you can attach the grill. The grill should snap into place over the front of the speaker.
- If you wish to paint the grill to match your room’s décor, do so before attaching it to the speaker.
- Testing :
- Once everything is set up, play some audio to test the speaker’s sound quality and ensure the connections are secure.
- Repeat :
- If you have a second speaker, repeat the above steps for its installation.
Guaranteed Satisfaction
To back their product, Pyle offers a full refund within the first 30 days if the product doesn’t meet the expectations. Moreover, the speakers come with a limited 1-year manufacturer warranty, ensuring peace of mind for users. If any defects arise within this period, Pyle promises to replace the item.
FAQs
Is the Pyle PDIC1661RD speaker system suitable for outdoor installation?
No, the speakers are not waterproof, so they are designed primarily for indoor use.
Does the package come with both round and square grills?
Yes, the speaker system includes changeable round and square grills to match your preference or room aesthetics.
What kind of wires do I need for installation?
You'll need speaker wires for the installation, which are not included in the package.
What is the maximum power output of these speakers?
The maximum power output of the Pyle PDIC1661RD speakers is 200 Watts.
Can I paint the grills to match my room’s décor?
Yes, the grills are stain-resistant, so you can paint them to match your room's color scheme.
What are the dimensions for the cut-out during installation?
The cut-out diameter is 7.6inches, and the mounting depth is 2.8inches.
Are these speakers sold individually or as a pair?
The Pyle PDIC1661RD speakers are sold as a pair.
What's the warranty on these speakers?
Pyle offers a limited 1-Year manufacturer warranty on this product.
How much does one speaker weigh?
A single speaker weighs approximately 5.5 lbs.
Do I need any special tools for the installation?
Basic tools such as a pencil for marking, a drywall saw or similar tool for cutting, and a screwdriver should suffice for the installation.
Can these speakers connect to any home theater system?
As long as your home theater system supports wired speaker connections and is compatible with the speaker’s impedance and power rating, you should be able to connect the Pyle PDIC1661RD speakers.
Is there a return policy if I’m not satisfied with the product?
Yes, if you're not satisfied with the item, you can return it within the first 30 days for a full refund.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>