BASS JAXX SP-0224 DIAMOND Wireless Speaker Instruction Manual
- June 13, 2024
- BASS JAXX
Table of Contents
BASS JAXX SP-0224 DIAMOND Wireless Speaker
Thank you for purchasing the Diamond Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using.
Product Overview
- Volume +/ Next Song/ Next Channel
- Volume -/ Previous Song/ Previous Channel
- Play/ Pause
- Power/ Bluetooth/ FM Mode
- USB Type-C Charging Port
- LED Indicator
Package Contents
- 1 (One) Wireless Speaker 6.7in. × 2.4in. × 1.7in. (17cm x 6.1cm x 4.4cm)
- 1(One) Type-C Charging Cable 19.7 in. (50 cm)
- 1(One) Instruction Manual
Bluetooth Speaker Mode
- Play/Pause: Short press the Play/Pause Button once.
- Next Track: Short press the “+” Button
- Previous Track: Short press the “-” Button
- Volume Up: Long press the “+” Button
- Volume Down: Long press the “-” Button
FM Radio Mode
Note: Please plug in USB Type-C cable as FM antenna before switch to FM Radio Mode.
- Switch to FM Radio Mode: Short press the “M” Button once. Short press the “M” Button again will back to Bluetooth Speaker mode.
- Auto Scan: Long press the Play/Pause Button.
- Next Channel: Short press the “+” Button
- Previous Channel: Short press the “-* Button
- Volume Up: Long press the “+” Button
- Volume Down: Long press the “-” Button
- Mute/Unmute: Short press the Play/Pause Button
Pair Wireless speaker with your mobile device
- Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone within range and select “BT DIAMOND SPK” from the list shown.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless speaker to your mobile device
When powered on, the wireless speaker will automatically connect with the last
successfully paired device.
Charging your Wireless speaker
For your safety, please always use appropriate 5V output charger/Adapter to
charge the product. DO NOT USE Quick Charging USB Adapter to charge the
product, as it might damage the product.
- Use the USB Type-C charging cable provided with this wireless speaker.
- Connect the USB plug to a USB port on a computer or wall adapter, then connect the USB Type-C plug to USB Type-C charging port on the speaker to begin charging.
- The LED Indicator will turn red while charging and will turn off once fully charged.
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Wireless speaker if it has been not used for more than 6 months.
Technical Specification
- Driver Diameter: 45 mm
- Impedance: 4 Ohms
- Power Supply: Li-ion Battery 3.7V 300 mAh
- Playtime: 1.5-2 Hours
- Charging Time: 1.5-2 Hours
- Bluetooth Range: 32.8 Feet
- Bluetooth Version: 5.3
Type-C Charging Cable Included
FAQ
If the Wireless speaker cannot be paired with your device, please try the
following:
Ensure that your speaker is in pairing mode or reconnection mode. Ensure that
Bluetooth search function of your mobile device is activated.
If the Wireless speaker cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely
and the outlet works. If you use a computer, ensure that it is connected and
the USB port is powered.
A Safety instructions for the lithium battery and charging the product
- The input voltage to the product is DC 5V 1A.
- In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.
- Only charge the product at ambient temperatures between 10°C/ 50°F and 40°C/ 104°F.
- Do not heat above 70°C/ 158°F, eg. Do not expose to sunlight or throw into fire.
- Switch off the product after use.
- Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
- In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Keep AlI Relevant Information for Future Reference
- Distributed by 1616 Holdings, Inc.
- 701 Market Street, Suite 200
- Philadelphia, PA 19106