finder 12.B2 Toolbox App User Manual

12.B2 Toolbox app manual
CONFIGURATION

FINDER TOOLBOX APP
Free app for configuring Finder devices with your smartphone.
Series available for configuration: S12 – S18 – S7M – S70 – S84.
Available on:

INTRODUCTION

DEVICE CONFIGURATION

To start configuration, open the Toolbox app and select 12.B2 from the list.
Select “Communication channel” to continue.

Next, you can choose the communication channel to configure the Type 12.B2.

• NFC: useful for configuring the device without powering it. It is not possible to associate external channels and input interfaces.
• Bluetooth: the device must be powered but you have access to all functions.

NOTE: to use Type 12.B2 with Bluetooth, you need to enable Bluetooth and Location (or GPS) on your smartphone.
If you selected “Bluetooth”, push the joystick down on the Type 12.B2 you wish to configure to proceed.
If you selected “NFC”, place your smartphone on the face of the Type 12.B2 you wish to configure.

CONFIGURATION PAGE

CONFIGURATION GENERAL PARAMETERS

TIME AND DATE

COORDINATE SETTINGS

Country/Postal code
The fastest way to identify the device’s geographical location is to enter the country and the first two digits of the postal code where the device is located.
If your country is not available, enter your latitude and longitude manually.
Latitude/Longitude
If the country is not available in the previous option, manually enter the latitude, longitude and time zone where the device is located.

CONFIGURABLE FUNCTIONS

COMMON PARAMETERS TO ALL FUNCTIONS
All functions have some common parameters, such as:

• The channel (internal or external) on which the program I am configuring must run
• The period type that the program is to follow
• The weekdays in which the program must be repeated

CHANNELS

NOTE: the Types 13.21-B000 once associated with a Type 12.B2 to be used with the YESLY system must be  associated with the system, reset to factory data and associated again.

PERIOD TYPE
Type 12.B2, being an annual clock, requires a configuration relating to the type of period to be configured:

• WEEKLY: “standard” programming runs every day, low priority. Max 60
• YEARLY: programming runs between 2 specific dates. Medium priority. Max 20
• DAILY: performed on a specific day of the year.
  Eg. Christmas Day High priority Max 20

TIMER (CLASSIC)

TIMER WITH CORRECTION ASTRO OVERLAY
With the TIMER WITH CORRECTION ASTRO OVERLAY function, it is possible to ensure an on or off priority at the time of the function to ensure, for exemple, that the output is switched off at dawn.

PULSE
With the PULSE function, it is possible to set the activation of the selected channel at a specific time for a time from 1 second to 90 minutes.

ASTRO
The ASTRO function allows “light-dependent” management by enabling or disabling the channel according to the sunrise and sunset times. It is possible to set an offset from the natural time.

CYCLIC
The logic of the CYCLIC function is similar to that of pause and work.
It is necessary to set a start time, a function end time then the time of the complete work cycle and the time of the pulse at the ON start.

RANDOM
With the RANDOM function, you can carry out random switching.Eg. to simulate your presence at home when you are on holiday.

CONFIGURATION MANAGEMENT

HOW TO SEND THE CONFIGURATION

Once the configuration setup is completed, press “Send to device” to continue.
You can:

• Send time and date: Send only the time and date (no postal code and coordinates).
• Send configuration: Send all configuration settings as well as time, date, postal code and coordinates.
  NOTE: if in Bluetooth mode, the transfer is automatic (press the joystick down if the transfer is not immediate).
  In NFC mode, it is necessary to touch the back of the phone against the front of the Type 12.B2.

SAVING CONFIGURATION SETTINGS

Once the configuration setup is completed, select the icon in the top right of the app to save it.
Enter the name of the configuration and select “Save”.
NOTE: the saved programming does not include the association of both external input and output channels, but the programs relating to channels B, C, D, E, F will still be saved.
It will therefore be necessary to associate different devices to the different Type 12. B2 on which the saved programming will be applied.

EXTERNAL CHANNELS

TYPE 13.21-B000 ASSOCIATION (CHANNELS C, D, E, F)

To associate an external channel, select it from the list on the main screen. Eg: Channel C
Before powering up Type 13.21-B000, wire a button between terminals L and P1 as it will be used for association.
Press “Configure“ to continue.

Press and hold down the button between terminals L and P1 of Type 13.21-B000.
When prompted, release the button.
NOTE: once associated, the P1 pushbuttons of Type 13.21-B000 will be disabled.
Now the device is associated, it is good practice to mark the channel on the Type 13.21-B000 for easier identification.
NOTE: once the Type 13.21-B000 has been associated with a Type 12.B2, it must be reset to factory settings before being associated with another 12.B2 or YESLY system.

TYPE 13.21-B000 REMOVAL

Selected the external channel you want to remove.
Select “Remove”.
NOTE: you must be near the device for this operation to be successful.

EXTERNAL INPUTS

TYPE 1Y.P2 ASSOCIATION

To associate an external input, select it from the list on the main screen.
Eg: Input 1
NOTE: check that the Type 1Y.P2 input interface has not been previously configured as a “scenario” in a YESLY system.
Press “Configure” to continue.

To complete the configuration, select “Apply”.
Press and hold the required wired push button connected to the Type 1Y.P2 (these buttons should be connected between P1-L1 or P2-L2).
When prompted release the wired push button.
Wait for the configuration to be transferred to the Type 12.B2.

TYPE 1Y.P2 REMOVAL

Select the external input you want to remove.
Select “Remove”.
NOTE: you must be near the device for this operation to be successful.

Manual 12.B2 Toolbox app
12.B2 Toolbox app manual – Configuration
09/2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>