SIEMENS WM14UQ92GB Washing machine User Manual
- October 26, 2023
- SIEMENS
Table of Contents
WM14UQ92GB Washing machine
📱 CURSO DE REPARACIÓN Y MANTENI...
📱 CURSO DE REPARACIÓN Y MANTENIMIENTO DE CELULARES - Sena 2022
Washing machine
WM14UQ92GB
en User manual and installation instructions Register your product on My
Siemens and discover exclusive services and offers. siemens-home.bsh-
group.com/welcome
The future moving in.
Siemens Home Appliances
en
For further information, please refer to the Digital User Guide.
Table of contents
1 Safety …………………………………….. 4 1.1 General information……………….. 4 1.2 Intended
use…………………………. 4 1.3 Restriction on user group……….. 4 1.4 Safe installation
…………………….. 5 1.5 Safe use ………………………………. 7 1.6 Safe cleaning and mainten-
ance…………………………………….. 9 2 Preventing material damage ….. 10 3 Environmental
protection and
saving energy……………………….. 11 3.1 Disposing of packaging ……….. 11 3.2 Save
energy and conserve
resources……………………………. 11 3.3 Energy saving mode ……………. 11 4 Installation and
connection……. 12 4.1 Unpacking the appliance ……… 12 4.2 Contents of
package……………. 12 4.3 Requirements for the install-
ation location ………………………. 12 4.4 Removing the transit bolts ……. 13 4.5
Connecting the appliance …….. 14 4.6 Aligning the appliance………….. 15 4.7
Connecting the appliance to
the electricity supply…………….. 16 5 Familiarising yourself with
your appliance………………………. 17 5.1 Appliance …………………………… 17 5.2 Detergent
drawer…………………. 18 5.3 Control panel………………………. 18 5.4 Operating logic…………………….
18
6 Before using for the first time … 19 6.1 Starting an empty washing
cycle ………………………………….. 19 7 Display …………………………………. 20 8 Buttons …………………………………
22 9 Programmes …………………………. 24 10 Accessories………………………… 28 11
Laundry………………………………. 28 11.1 Preparing the laundry …………. 28 12 Detergents and
care
products …………………………….. 29 13 Basic operation …………………… 29 13.1 Switching on the
appliance …. 29 13.2 Setting a programme …………. 29 13.3 Adjusting the programme
settings …………………………….. 29 13.4 Saving the programme set-
tings…………………………………. 29 13.5 Loading laundry…………………. 30 13.6 Using a measuring
aid for
liquid detergent …………………. 30 13.7 Use the measuring aid for
liquid detergent …………………. 30 13.8 Adding detergent and care
product …………………………….. 31 13.9 Starting the programme ……… 31 13.10 Adding
laundry ………………… 31 13.11 Cancelling the pro-
gramme ………………………….. 31 13.12 Unloading the laundry ………. 31 13.13 Switching off
the appli-
ance……………………………….. 32
2
en 14 Childproof lock……………………. 32 14.1 Activating the childproof
lock ………………………………….. 32 14.2 Deactivating the childproof
lock ………………………………….. 32 15 Basic settings……………………… 32 16 Cleaning and
servicing ………… 32 16.1 Cleaning the drum……………… 32 16.2 Cleaning the detergent
drawer………………………………. 33 16.3 Cleaning the drain pump…….. 33 17
Troubleshooting………………….. 36 17.1 Emergency release ……………. 44 18
Transportation, storage and
disposal ……………………………… 44 18.1 Removing the appliance …….. 44 18.2 Inserting
the transit bolts…….. 44 18.3 Using the appliance again ….. 44 18.4 Disposing
of old appliance …. 45 19 Customer Service………………… 45 19.1 Product number
(E-Nr.) and
production number (FD)……… 45 20 Consumption values……………. 47 21 Technical
specifications………. 47
3
enSafety
1Safety
Observe the following safety instructions. 1.1General information
¡ Read this instruction manual carefully. ¡ Keep the instruction manual and
the product information safe
for future reference or for the next owner. ¡ Do not connect the appliance if
it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ For
washing machine-washable fabrics and hand-washable wool
in accordance with the care label. ¡ With tap water and commercially available
detergents and care
products suitable for washing machines. ¡ In private households and in
enclosed spaces in a domestic en-
vironment. ¡ Up to an altitude of max. 4000 m above sea level. 1.3Restriction
on user group This appliance may be used by children aged 8 or over and by
people who have reduced physical, sensory or mental abilities or inadequate
experience and/or knowledge, provided that they are supervised or have been
instructed on how to use the appliance safely and have understood the
resulting dangers. Children must not play with the appliance. Cleaning and
user maintenance must not be performed by children unless they are being
supervised. Keep children under the age of 3 years and pets away from the
appliance.
4
Safetyen
1.4Safe installation Take note of the safety instructions when installing the
appliance.
WARNING Risk of electric shock! Improper installation is dangerous. Connect
and operate the appliance only in accordance with the
specifications on the rating plate. Connect the appliance to a power supply
with alternating cur-
rent only via a properly installed socket with earthing. The protective
conductor system of the domestic electrical in-
stallation must be properly installed. The installation must have a
sufficiently large cross section. When using a residual current circuit
breaker, only use a type with the mark. Never equip the appliance with an
external switching device, e.g. a timer or remote control. When the appliance
is installed, the mains plug of the power cord must be freely accessible. If
free access is not possible, an all-pole isolating switch must be installed in
the permanent electrical installation according to the installation
regulations. When installing the appliance, check that the power cable is not
trapped or damaged. If the insulation of the power cord is damaged, this is
dangerous. Never let the power cord come into contact with hot appliance parts
or heat sources. Never let the power cord come into contact with sharp points
or edges. Never kink, crush or modify the power cord.
WARNING Risk of fire! It is dangerous to use an extended power cord and non-
approved adapters. Do not use extension cables or multiple socket strips. If
the power cord is too short, contact Customer Service. Only use adapters
approved by the manufacturer.
5
enSafety
WARNING Risk of injury! The high weight of the appliance may result in injury
when lifted. Do not lift the appliance on your own. If this appliance is not
correctly installed in a washer-dryer stack, the installed appliance may fall.
Only stack the dryer on a washing machine using the connec-
tion kit from the dryer manufacturer . No other installation method is
permitted. Do not install the appliance in a washer-dryer stack if the dryer
manufacturer does not offer a suitable connection kit. Do not install
appliances from different manufacturers and with varying depths and widths in
a washer-dryer stack. Do not install a washer-dryer stack on a platform; the
appliances may tip over.
WARNING Risk of suffocation! Children may put packaging material over their
heads or wrap themselves up in it and suffocate. Keep packaging material away
from children. Do not let children play with packaging material.
CAUTION Risk of injury! The appliance may vibrate or move when in use. Place
the appliance on a clean, even, solid surface. Align the appliance using the
appliance feet and a spirit level. If hoses and power cords have been laid
incorrectly, this causes a tripping hazard. Lay hoses and power cords in such
a way that there is no risk
of tripping. If the appliance is moved by holding onto protruding components,
such as the appliance door, the parts may break off. Do not move the appliance
by holding onto protruding parts.
CAUTION Risk of cutting! Touching sharp edges on the appliance may lead to
cuts. Do not touch the sharp edges on the appliance.
6
Safetyen
Wear protective gloves when installing and transporting the appliance.
1.5Safe use WARNING Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous. Never
operate a damaged appliance. Never pull on the power cord to unplug the
appliance. Always
unplug the appliance at the mains. If the appliance or the power cord is
damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box and turn off the
water tap. Call customer services. Page 45 An ingress of moisture can cause an
electric shock. Only use the appliance in enclosed spaces. Never expose the
appliance to intense heat or humidity. Do not use steam- or high-pressure
cleaners, hoses or sprays to clean the appliance.
WARNING Risk of harm to health! Children can lock themselves in the appliance,
thereby putting their lives at risk. Do not install the appliance behind a
door as this may obstruct
the appliance door or prevent it from opening. With redundant appliances,
unplug the power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so
that the appliance door will no longer close.
WARNING Risk of suffocation! Children may breathe in or swallow small parts,
causing them to suffocate. Keep small parts away from children. Do not let
children play with small parts.
7
enSafety
WARNING Risk of poisoning! Detergents and care products may result in
poisoning if consumed. If accidentally swallowed, seek medical advice. Keep
detergents and care products out of the reach of children.
WARNING Risk of explosion! Laundry that has been pretreated with cleaning
agents that contain solvents may cause an explosion in the appliance. Rinse
pretreated laundry thoroughly with water before washing.
CAUTION Risk of injury! The covering plate may break if you stand on or climb
onto the appliance. Do not stand on or climb onto the appliance. The appliance
may tip over if you sit on or lean against the open door. Do not sit on or
lean against the appliance door. Do not place any objects on the appliance
door. Reaching into the drum while it is still turning may cause hand
injuries. Wait for the drum to come to a complete stop before reaching
inside. CAUTION Risk of scalding!
When you wash at high temperatures, the detergent solution gets hot. Do not
touch the hot detergent solution.
CAUTION Risk of injury! This appliance runs programmes that use active oxygen.
Active oxygen can cause eyes to water and irritate the mucosa. Do not open the
appliance door using the emergency release if
a programme is running with active oxygen. Wait for the appliance door to be
released.
8
Safetyen
CAUTION Risk of chemical burns! If the detergent drawer is opened, detergent
and care products may spray out from the appliance. Contact with eyes or skin
may cause irritation. Rinse eyes and/or skin thoroughly with clean water if
they come
into contact with detergents or care products. If accidentally swallowed, seek
medical advice. Keep detergents and care products out of the reach of
children. 1.6Safe cleaning and maintenance Take note of the safety
instructions when cleaning and performing maintenance work on the appliance.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to
the appliance should only be carried out by trained
specialist staff. Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer’s Customer Service or a similarly
qualified person in order to prevent any risk. An ingress of moisture can
cause an electric shock. Do not use steam- or high-pressure cleaners, hoses or
sprays to clean the appliance.
WARNING Risk of injury! The use of non-original spare parts and non-original
accessories is dangerous. Only use the manufacturer’s original spare parts and
original ac-
cessories. WARNING Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain
solvents. Do not use cleaning agents that contain solvents.
9
enPreventing material damage
2Preventing material Preventingmaterialdamage damage
Follow these instructions to avoid ma- Preventingmaterialdamage terial damage
and damage to the appliance. ATTENTION! The functionality of the appliance may
be impaired if you use the wrong quantity of fabric softener, detergent, care
product or cleaning agent. Follow the dosage recommenda-
tions from the manufacturer. Exceeding the maximum load capacity impairs the
function of the appliance. Observe the maximum load capa-
city for each programme and do not exceed it. “Programmes”, Page 24 The
appliance is secured for transportation using transit bolts. Transit bolts
which have not been removed may result in material damage and damage to the
appliance. Before starting up the appliance, remove the transit bolts
completely and keep them in a safe place. Before transport, fit the transit
bolts fully in order to prevent damage in transit. Material damage may be
caused if the water inlet hose is connected incorrectly. Tighten the screw
connections on the water inlet until they are handtight. Ideally, connect the
water inlet hose directly to the water tap, without any additional connecting
elements such as adapters, extensions, valves or similar. Ensure that the
inner diameter of the water tap is at least 17 mm.
Make sure that the length of the thread on the connection to the water tap is
at least 10 mm.
If the water pressure is too high or too low, the appliance may not be able to
operate properly. Ensure that the water pressure in
the water supply system is at least 100 kPa (1 bar) and max. 1000 kPa (10
bar). If the water pressure exceeds the maximum value specified, a pressure-
reducing valve must be installed between the drinking water connection and the
hose set of the appliance. Do not connect the appliance to the mixer tap of an
unpressurised hot-water boiler. Modified or damaged water hoses may result in
material damage and damage to the appliance. Never kink, crush, modify or cut
through water hoses. Only use the water hoses supplied with the appliance or
genuine spare hoses. Never re-use water hoses that have been used before.
Operating the appliance using water that is dirty or too hot may lead to
material damage and damage to the appliance. Only operate the appliance with
cold mains water. Unsuitable cleaning products may damage the surfaces of the
appliance. Do not use harsh or abrasive detergents. Do not use cleaning
products with a high alcohol content. Do not use hard scouring pads or
cleaning sponges. Clean the appliance with nothing but water and a soft, damp
cloth.
10
Environmental protection and saving energyen
Remove all detergent residue, spray residue or other residues immediately if
they come into contact with the appliance.
3Environmental protec- Environmentalprotectionandsavingenergy tion and saving
energy
Environmental protection and saving energy
3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by
type and dispose of them separately.
Reduce the washing temperature for lightly and normally soiled laundry. a At
lower temperatures, the appli-
ance consumes less energy. For light to normal soiling, lower temperatures
than indicated on the care label are also sufficient.
Set the maximum spin speed if you want to dry the laundry in the tumble dryer
afterwards. a The drier the laundry, the shorter
the programme duration when drying which, in turn, reduces energy consumption.
A higher spin speed reduces the residual moisture in the laundry and increases
the volume of the spin noise.
3.2Save energy and conserve resources
If you follow these instructions, your appliance will use less electricity and
less water.
Choose programmes with low temperatures and longer wash times and use maximum
load capacity. a Energy consumption and water
consumption is most efficient.
Use the economy programme settings. a If you adjust the programme set-
tings for a programme, the display shows the expected consumption.
Add detergent based on the laundry’s degree of soiling. a For light to normal
soiling, a smal-
ler amount of detergent is sufficient. Observe the dosage recommendation from
the detergent manufacturer.
Wash the laundry without prewash. a Washing with prewash increases
the programme duration and increases energy and water consumption.
The appliance has a continuous automatic load adjustment function. a Depending
on the type of fabric
and load capacity, the continuous automatic load adjustment function optimally
adjusts the water consumption and programme duration.
3.3Energy saving mode
If you do not use the appliance for an extended period, it automatically
switches to energy-saving mode. Energy-saving mode ends when you use the
appliance again.
11
enInstallation and connection
4Installation and con- Installationandconnection nection
Installation and connection
4.1Unpacking the appliance
ATTENTION! Objects remaining in the drum that are not designed for operation
with the appliance may cause material damage and damage to the appliance.
Remove these objects, along with
all supplied accessories, from the drum before starting the appliance. 1.
Remove any packaging and protective covers completely from the appliance.
“Disposing of packaging”, Page 11. 2. Check the appliance for visible damage.
3. Open the appliance door. “Basic operation”, Page 29 4. Remove any
accessories from the drum. 5. Close the appliance door.
4.2Contents of package
After unpacking all parts, check for any damage in transit and completeness of
the delivery. ATTENTION! If the appliance is operated with incomplete or
defective accessories, the appliance may not be able to operate properly, or
this may result in material damage or damage to the appliance. Do not operate
the appliance with
incomplete or defective accessories.
12
Replace the accessories in question before operating the appliance.
“Accessories”, Page 28
Note: The appliance has been tested at the factory to check it is in working
order. As a result, water stains may remain in the appliance. These marks will
disappear after the first wash cycle. The delivery consists of the following:
¡ Washing machine ¡ Accompanying documents ¡ Transit bolts
“Removing the transit bolts”, Page 13 ¡ Cover caps ¡ Water inlet hose
“Connecting the water inlet hose”, Page 14
4.3Requirements for the installation location
WARNING Risk of electric shock! The appliance contains live parts. Touching
live parts is dangerous. Do not operate the appliance
without a cover cap.
WARNING Risk of injury! When using the appliance on a base, the appliance may
tip over. Always secure the feet of the appli-
ance to a base using the manufacturer’s fixing brackets Page 28 before using
the appliance for the first time. ATTENTION! The appliance may contain
residual water. If you tilt the appliance beyond 40°, this residual water may
leak out. Tilt the appliance carefully.
Installation loca- Requirements tion
Base
Secure the appliance with fixing brackets Page 28.
Wooden joist floor Kitchen unit Against a wall
Place the appliance on a waterresistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Only install the appliance underneath a continuous worktop that is securely connected to adjacent cabinets. Required niche width: 60 cm. Do not trap the hoses between the wall and the appliance.
Installation and connectionen
4.4Removing the transit bolts
The appliance is secured for transportation using transit bolts on the rear of
the appliance. Note: Keep the transit bolt screws and the sleeves in a safe
place for future transport Page 44. 1. Pull the hoses out of the holders.
2. Unscrew and remove all 4 screws for the transit bolts with a WAF 13
wrench.
ATTENTION! Residual water may freeze. Freezing residual water may damage the
appliance and frozen hoses may burst. Do not install the appliance out-
doors or in areas where there is a risk of frost.
13
enInstallation and connection 3. Pull the power cable out of the
holder.
6. Press down on the 4 cover caps.
4. Remove the 4 sleeves.
4.5Connecting the appliance
Connecting the water inlet hose 1. Connect the water inlet hose.
5. Put on the 4 cover caps.
2. Connect the water inlet hose to a tap (26.4 mm = 3/4″).
3. Open the water tap carefully and check that the connection points are
tight.
14
Water outlet connection types This information is intended to help you to connect this appliance to the water outlet.
ATTENTION! When draining, the water outlet hose is subject to water pressure
and may come loose from the installed connection point. Secure the water
outlet hose
against unintentional loosening.
Note: Observe the draining heights. The maximum draining height is 100 cm.
Siphon
Secure the connection point with a (24Â40 mm) hose clamp.
Sink
Fix and secure
the water outlet
hose with an el-
bow
Page 28.
Installation and connectionen
4.6Aligning the appliance
In order to reduce noise and vibration and to prevent the appliance from
moving, align the appliance correctly. 1. Loosen the lock nuts using a WAF
17 wrench by turning it in a clockwise direction.
2. To align the appliance, turn the appliance feet. Check that the appliance
is level using a spirit level.
Plastic pipe with rubber sleeve or gully
Fix and secure the water outlet hose with an elbow Page 28.
All appliance feet must stand firmly on the ground.
15
enInstallation and connection 3. Screw the lock nuts tightly against
the housing using a WAF 17 wrench.
In doing so, hold the foot tight and do not adjust its height.
4.7Connecting the appliance to the electricity supply
1. Insert the mains plug of the appliance’s power cable in a socket nearby.
The connection details of the appliance can be found under Technical data Page
47.
2. Check the mains plug is inserted properly.
16
Familiarising yourself with your applianceen
5Familiarising yourself with your appliance
Familiarisingyourselfwithyourappliance
Familiarising yourself with your appliance
5.1Appliance
You can find an overview of the parts of your appliance here.
3
4
56
2
7
7
1
On certain models, specific details such as the colour and shape may differ from those pictured.
1
Maintenance flap for the drain pump Page 33
2 Door
3 Detergent drawer Page 18
4 Control panel Page 18
5 Water outlet hose Page 15
6 Power cord Page 16
7 Transit bolts Page 13
17
enFamiliarising yourself with your appliance
5.2Detergent drawer
1
Measuring aid for liquid detergent
“Using a measuring aid for
liquid detergent”, Page 30
4
2
Compartment II: ¡ Detergent for main wash
3
¡ Water softener ¡ Bleach
¡ Stain remover
3
Compartment : ¡ Fabric softener
¡ Liquid starch
¡ Waterproofing agent
12
4
Compartment I: ¡ Detergent for prewash
¡ Hygiene detergent
5.3Control panel
You can use the control panel to configure all functions of your appliance and
to obtain information about the operating status.
1
2
1 Programmes
2
Programme selector Page 29
3
Buttons Page 22 and display Page 20
18
3
5.4Operating logic
ATTENTION! Pressing on the display with force may cause damage. Do not apply
heavy pressure on
the display.
Do not press on the display using pointed or sharp objects.
1
2
Before using for the first timeen 5. Pour standard washing powder
into compartment II.
6Before using for the Beforeusingforthefirsttime first time
Prepare the appliance for use. Beforeusingforthefirsttime
6.1Starting an empty washing cycle
Your appliance was inspected thoroughly before leaving the factory. To remove
any residual water, run the first wash cycle without any laundry. 1. Press .
The switch-on process takes a few seconds. 2. Set the Drum Clean programme. 3.
Close the door. 4. Pull out the detergent drawer.
To prevent foaming, use only half of the amount of detergent recommended by
the detergent manufacturer for light soiling. Do not use detergent suitable
for woollens or delicates. 6. Push in the detergent drawer. 7. Press
(Start/Pause) to start the programme. a The display shows the remaining
programme duration. a After the programme has ended, the display shows: End.
8. Start the first wash cycle or press
to switch off the appliance. “Basic operation”, Page 29
19
enDisplay
7Display Display
The Display display shows the current settings, options or relevant
information.
Example: Display
Display 0:40 1
10 1 9,0 kg 1
End +1 +2 +3 1 Example
Designation Programme duration/programme time remaining “Ready in” time Recommended load Prewash Active oxygen treatment Wash Rinse Spin End of programme Additional rinse
More information Approximate expected programme duration or programme time
remaining.
“Buttons”, Page 22 The maximum load capacity for the selected programme in kg.
Programme status Programme status
Programme status Programme status Programme status Programme status
Additional rinse cycles are activated. “Buttons”, Page 23
20
Display
E:35 / -10 1 1 Example
Displayen
Designation
More information
Energy consumption
Energy consumption for the selected pro-
gramme.
¡ : Low energy consumption
¡
: High energy consumption
Water consumption
Water consumption for the selected pro-
gramme.
¡ : Low water consumption
¡
: High water consumption
End signal
Basic setting
Button signal
Basic setting
Display brightness Basic setting
Reminder to clean Flashes: Drum is dirty. Run the Drum
the drum
Clean programme for cleaning and caring
for the drum and the outer tub.
“Cleaning the drum”, Page 32
Voltage control system
Flashes: The automatic voltage control system detects impermissible voltage drops. This will pause the programme. Note: The programme will continue when the voltage is permissible again.
Voltage control system
Flashes: The programme has been paused because of impermissible voltage drops. The voltage is permissible again and the programme will continue. Note: The programme duration is extended.
Foam detection system
The appliance has detected too much foam.
Door
¡ Lights up: The door is locked and cannot be opened.
¡ Flashes: The door is not closed properly.
¡ Off: The door is unlocked and can be opened.
Tap
¡ No water pressure.
¡ The water pressure is too low.
Error
Error code, error display, signal.
21
enButtons
8Buttons Buttons
The Buttons selection of programme settings depends on the programme that is set. You can see the selection options for each programme in the overview for .
Button (Start/Pause)
Speed
(Blood) (Coffee) (Redwine) (Sweat) / (Ready in)
– 90° – 1400
(mains switch) 3 sec (Child Lock 3 sec.) (Settings) (Prewash)
Selection ¡ Start ¡ Cancel ¡ Pause ¡ Activate ¡ Deactivate
Multiple selection
Up to 24 hours
 90 °C – 1400 rpm
¡ Switch on ¡ Switch off ¡ Activate ¡ Deactivate Multiple selection ¡ Activate
¡ Deactivate
More information Start, cancel or pause the programme.
Activate or deactivate a shorter programme duration. Note: Energy consumption
increases. The washing result is not affected by this. Select the type of
stain. The temperature, drum movement and soaking time are all adjusted to
suit the type of stain. Set the programme end. The programme duration is
already included in the set number of hours. Once the programme has started,
the programme duration is displayed. Note: Use the buttons to set the setting
values. Adjust the temperature in °C. Adjust the spin speed or deactivate the
spin cycle. If is selected, the water is not drained and the spin cycle is
deactivated. The laundry stays wet inside the drum. Switch the appliance on or
off.
“Childproof lock”, Page 32
Basic settings Activate or deactivate prewash, e.g. for washing heavily soiled
laundry.
22
Button
Selection ¡ +1 ¡ +2 ¡ +3
(Rinse Hold)
¡ Activate ¡ Deactivate
(Easy Iron)
¡ Activate ¡ Deactivate ¡ Activate ¡ Deactivate
(Memory)
¡ Saving ¡ Setting
Buttonsen
More information Activate or deactivate up to three additional rinse cycles.
Recommended for particularly sensitive skin or in regions with very soft
water. Activate or deactivate spinning and draining at the end of the washing
cycle. The laundry remains in the water after the last rinse cycle. Wash with
more water. Recommended for particularly sensitive skin and for treating
laundry more gently. Activate or deactivate the reduced creasing programme. In
order to reduce creasing in the laundry, the spin cycle and the spin speed are
adapted. The laundry is damp enough after washing that it needs to be hung out
on a washing line. Press the button for approx. 3 seconds to save your
customised program settings. “Saving the programme settings”, Page 29 If you
briefly press the button, you can set customised program settings for your
program.
23
enProgrammes
9Programmes Programmes
Programmes
Note: The laundry’s care labels provide you with additional information about
programme selection. Care symbols on the care labels
Programme
Description
Max. load (kg)
Cottons
Wash hard-wearing items made from cotton, linen 9,0
or blended fabrics.
5,01
Also suitable as a short programme for normally
soiled laundry when you activate Speed.
Programme setting:
¡ Max. 90 °C
¡ Max. 1400 rpm
Eco 40-60
Wash items made from cotton, linen or blended
9,0
fabrics.
Note: Fabrics which can be washed from 40 °C up to 60 °C as per the care symbol can be washed together. The washing performance corresponds to the best possible washing performance class according to the legal requirements. For this programme, the washing temperature is automatically adjusted depending on the load size, in order to achieve the best possible energy efficiency with the best possible washing result. You cannot change the washing temperature.
Programme setting:
Note: The temperature cannot be adjusted in this programme and is set automatically.
¡ Max. – °C
¡ Max. 1400 rpm
Cotton Colour
Wash hard-wearing items made from cotton, linen 9,0 or blended fabrics. Energy-saving programme. Note: To save energy, the actual washing temperature may deviate from the set washing temperature. The washing performance meets legal requirements. Programme setting: ¡ Max. 90 °C ¡ Max. 1400 rpm
1 Speed activated
24
Programmesen
Programme
Description
Max. load (kg)
Easy Care
Wash items made from synthetic or blended fab- 4,0 rics. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm
Mixed Fabrics
Wash items made from cotton, linen, or synthetic or 4,0 blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm
Delicates/Silk
Wash delicate, washable items made from silk, vis- 2,0 cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm
Wool
Hand- or machine-washable items that are made 2,0 from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses. Use a detergent that is suitable for wool. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm
Rinse
Rinse and then spin the laundry, and drain the wa- Â ter. Programme setting: Max. 1400 rpm
Spin/Drain
Spin and drain the water.
Â
If you only want to drain the water, activate . The
laundry is not spun.
Programme setting: Max. 1400 rpm
1 Speed activated
25
enProgrammes
Programme
Description
Max. load (kg)
Shirts
Wash non-iron shirts and blouses made from cot- 2,0 ton, linen, or synthetic
or blended fabrics. Tip: In order to avoid creasing in your laundry, you can
activate . The laundry is only given a short spin and can be removed while
still dripping wet. Hang out shirts and blouses while they are still dripping
wet so that they drip dry. Note: Use the Delicates/Silk programme to wash
shirts and blouses made from silk or delicate fabrics.
Programme setting: ¡ Max. 60 °C ¡ Max. 800 rpm
Outdoor
Wash all-weather and outdoor clothing with mem- 2,0 brane technology and water-resistant equipment. Use a detergent for outdoor fabrics. Do not use fabric softener. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm
Drum Clean
Cleaning and caring for the drum.
Â
Use this programme in the following cases:
¡ Before using the appliance for the first time
¡ If you regularly wash at temperatures of 40 °C or
lower
¡ After a prolonged period of non-use
Use washing powder or a detergent that contains bleach. Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use liquid detergent or detergent that is intended for woollens or delicates. Note: The drum cleaning indicator will flash to remind you if you have not used a programme at 60 °C or higher for a long time.
Rapid 15’/30′
Wash items made from cotton, or synthetic or blen- 4,0 ded fabrics. Short programme for small items of lightly soiled laundry. The programme duration is approx. 30 minutes.
1 Speed activated
26
Programmesen
Programme
Description
Max. load (kg)
If you wish to reduce the programme duration to 15 minutes, activate Speed. The maximum load is reduced to 2,0 kg. Programme setting: ¡ Max. 40 °C ¡ Max. 1200 rpm
sensoFresh
For all washable items and for items that are suit- 1,0 able for professional cleaning only. Programme for freshening up dry laundry or removing odours, e.g. cigarette or kitchen odours. Dry the drum with a cloth before loading the laundry. Tip: The programme does not remove stains or sweat odours. In this programme, you can select the intensity of the active oxygen treatment. “Buttons”, Page 22
1 Speed activated
27
enAccessories
10Accessories Accessories
Use Accessories original accessories. These have been made especially for your appliance.
Water inlet hose extension
Fixing brackets Elbow Liquid detergent insert Platform
Use
Order number
Extend the water inlet hose for cold water or AquaStop (approx. 2.50 m).
WZ10131
Improves the stability of WX975600 the appliance.
Secure the water outlet 00655300 hose in place.
Measure liquid detergent.
00605740
Install the appliance at a WMZ20490 raised height so that it can be easily loaded and unloaded.
11Laundry Laundry
Laundry
Note: More detailed instructions for use can be found on www.siemenshome.bsh-
group.com or by scanning the QR code on the title page of this user manual. To
remove odours, you can also simply freshen up fabrics using active oxygen.
11.1Preparing the laundry
ATTENTION! Objects remaining in the laundry may damage the laundry and the
drum. Remove all items from any pock-
ets in your laundry before using the appliance. To protect your appliance and
the laundry, prepare the laundry beforehand. Â Empty any pockets
28
 Brush sand out of all collars and pockets
 Close bed covers and cushion covers
 Close all zips, Velcro fasteners, hooks and eyes
 Tie cloth belts, apron strings, etc. together or use a laundry bag.
 Tie together longer drawstrings, and tie cords with solid endpieces in hoods
or trousers
 Remove curtain hooks and lead strips or use a mesh laundry bag
 Use a mesh laundry bag for small items of laundry, such as children’s socks
 Some stubborn or dried-in stains can be removed by washing several times
 Wash large and small items of laundry together
 Do not rub fresh stains but dab them with soapy water
 Separate items of laundry and shake them out, or observe the programme
description
12Detergents and care Detergentsandcareproducts products
Detergents and care products
Notes ¡ More detailed instructions for use
can be found on www.siemenshome.bsh-group.com or by scanning the QR code on
the title page of this user manual. ¡ Observe the information on safety Page 4
and preventing material damage Page 10. The manufacturer’s instructions for
use and dosage can be found on the packaging. Notes ¡ Only use liquid
detergents that are self-flowing ¡ Do not mix different liquid detergents ¡ Do
not mix detergent and fabric softener ¡ Do not use products that have expired
or are highly congealed ¡ Do not use products containing solvents, caustic
agents or volatile substances (e.g. bleach) ¡ Use dyes sparingly as salt may
damage stainless steel ¡ Do not use bleaching agents in the appliance
13Basic operation Basicoperation
Basic operation
Note: You can find further information in the digital instruction manual by
scanning the QR code in the table of contents or on www.siemenshome.bsh-
group.com .
Detergents and care productsen
13.1Switching on the appliance
Requirement: The appliance has been correctly installed and connected.
“Installation and connection”, Page 12 Press .
The switch-on process takes a few seconds. Note: The lighting for the drum
goes out automatically.
13.2Setting a programme
1. Turn the programme selector and set the required programme. “Programmes”,
Page 24
2. If necessary, adjust the programme settings Page 29.
13.3Adjusting the programme settings
Requirement: A programme has been set. “Setting a programme”, Page 29 Adjust
the programme settings.
“Buttons”, Page 22 Observe the information about operating logic. Note: The
programme settings are not saved permanently for the programme.
13.4Saving the programme settings
You can save your individual programme settings as favourites. Requirements ¡
A programme has been set. ¡ The programme settings have
been adjusted.
29
enBasic operation
Press and hold for approx. 3 seconds. Press to call up the saved programme.
Note: To overwrite the saved programme, repeat the steps above.
13.5Loading laundry
Note: To prevent creasing, take note of the maximum load for the “Programmes”,
Page 24. Requirement: The laundry is prepared. “Laundry”, Page 28 1. Open the
door.
Make sure that the drum is empty. 2. Place the laundry in the drum. 3. Close
the door.
Ensure that there is no laundry trapped in the door.
13.6Using a measuring aid for liquid detergent
If you order the measuring aid as an accessory, you must use the measuring
aid. 1. Pull out the detergent drawer. 2. Press down on the insert and re-
move the detergent drawer.
3. Insert the measuring aid.
4. Insert the detergent drawer.
13.7Use the measuring aid for liquid detergent
To add liquid detergent, you can use a measuring aid in the detergent drawer.
- Pull out the detergent drawer. 2. Slide the measuring aid forwards.
30
3. Fold the measuring aid down and click it into place.
4. Push in the detergent drawer.
13.8Adding detergent and care product
Notes ¡ Do not use the measuring aid for
liquid detergent for gel detergents, washing powder, or if Prewash or “Ready
in” time are activated. ¡ Observe the information about detergents and care
products Page 29. 1. Pull out the detergent drawer. 2. Pour in detergent.
“Detergent drawer”, Page 18 3. If required, add the care product. 4. Push in
the detergent drawer.
13.9Starting the programme
Note: If you want to change the time until the programme ends, set the “Ready
in” time first. Press . a The drum rotates and load detec-
tion takes place. This can take up to 2 minutes, after which water enters the
drum. a The display shows either the programme duration or the “Ready in”
time.
Basic operationen
a If you start a programme with active oxygen, the drum lights up after the
programme starts and the mist that is created can be seen.
13.10Adding laundry
Note: If you a start a programme with active oxygen, you cannot add any
laundry after the programme has started. 1. Press .
The appliance pauses. Note: If appears, it is not possible to add laundry.
When goes out, it is possible to add laundry. 2. Open the appliance door. 3.
Add or remove laundry. 4. Close the appliance door. 5. Press .
13.11Cancelling the programme
1. Press . 2. Open the appliance door.
The appliance door remains locked for safety reasons if the temperature and
water levels are high. Â If the temperature is high, start
the Rinse programme. Â If the water level is high, start
the Spin programme or select a suitable programme for draining. “Programmes”,
Page 24 3. Remove the laundry Page 31.
13.12Unloading the laundry
1. Open the appliance door. 2. Remove the laundry.
31
enChildproof lock
13.13Switching off the appliance
1. Press . 2. Turn off the tap. 3. Wipe the rubber gasket dry and re-
move any foreign objects.
Press and hold 3 sec for approx. 3 seconds.
15Basic settings Basicsettings
You Basicsettings can configure the appliance to meet your needs. Note: You
can find further information in the digital instruction manual by scanning the
QR code in the table of contents or on www.siemenshome.bsh-group.com .
4. Leave the appliance door and detergent drawer open so that residual water
can evaporate.
14Childproof lock Childprooflock
Secure Childprooflock your appliance against being operated unintentionally
using the controls.
14.1Activating the childproof lock
Press and hold 3 sec for approx. 3 seconds.
a The controls are locked. a The childproof lock remains active
even after the appliance has been switched off.
14.2Deactivating the childproof lock
Requirement: To deactivate the childproof lock, the appliance must be switched
on.
16Cleaning and servi- Cleaningandservicing cing
To keep your appliance working effi- Cleaningandservicing ciently for a long
time, it is important to clean and maintain it carefully. Note: You can find
further information in the digital instruction manual by scanning the QR code
in the table of contents or on www.siemenshome.bsh-group.com .
16.1Cleaning the drum
CAUTION Risk of injury! Permanently washing at low temperatures and a lack of
ventilation for the appliance may damage the drum and cause injury. Regularly
run a programme for
cleaning the drum or wash at temperatures of at least 60 °C. Leave the
appliance to dry after every operation with the door open, and leave the
detergent drawer to dry. Run the Drum Clean programme without laundry and
using all-purpose washing powder.
32
16.2Cleaning the detergent drawer
1. Pull out the detergent drawer. 2. Press down on the insert and re-
move the detergent drawer.
Cleaning and servicingen 5. Fit the insert and click it into place.
3. Pull out the insert upwards.
6. Clean the opening for the detergent drawer.
4. Clean the detergent drawer and insert with water and a brush, and then dry them.
7. Push in the detergent drawer.
16.3Cleaning the drain pump
Clean the drain pump in the event of faults, e.g. blockages or rattling
noises. Emptying the drain pump 1. Turn off the water tap. 2. Switch off the
appliance. 3. Disconnect the appliance’s mains
plug from the power supply.
33
enCleaning and servicing 4. Open and remove the service flap.
1 2
CAUTION – Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
solution.
To allow the detergent solution to flow out into the container, remove the sealing cap.
5. Slide a sufficiently large container under the opening.
8. Firmly press on the sealing cap. 6. Take the drain hose out of the
holder. 9. Insert the drain hose into the holder.
34
Cleaning the drain pump Requirement: The drain pump is empty. Page 33 1. Since
water may remain in the
drain pump, unscrew the pump cap carefully.
Cleaning and servicingen 4. Screw the pump cap as far as it
will go.
90°
The handle on the pump cap must be in a vertical position. 5. Insert and close
the service flap. 2. Clean the interior, the thread on the pump cap and the
pump housing.
2 1
3. Insert the pump cap.
35
enTroubleshooting
17Troubleshooting Troubleshooting
You Troubleshooting can rectify minor faults on your appliance yourself. Read
the troubleshooting information before contacting after-sales service. This
will avoid unnecessary costs.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to
the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power
cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer’s Customer Service or a similarly qualified
person in order to prevent any risk.
Fault The display goes out and flashes.
“E:36 / -10”
Cause and troubleshooting Energy-saving mode is active Press any button. a The
symbol lights up again. Drain pipe or water outlet hose is blocked. Clean the
drain pipe and the water outlet hose. Drain pipe or water drain hose is caught
or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped. Drain pump is blocked. “Cleaning the drain pump”, Page
33 The water outlet hose is connected too high. Install the water outlet hose
at a maximum height of
1 metre. Detergent dosage is too high. Immediate measure: Mix one tablespoon
of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand
compartment (not for outdoor clothing, sportswear or items stuffed with down).
Reduce the amount of detergent for the next washing cycle with the same load.
Unapproved extension installed on the water drain hose. Remove any unapproved
extensions from the water hose. Connecting the appliance The pump cap is not
fully screwed in.
36
Fault “E:36 / -10” “E:36 / -25 / -26”
flashes.
lights up.
Troubleshootingen
Cause and troubleshooting Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap must be in a vertical position.
“Cleaning the drain pump”, Page 35 Drain pump is blocked. “Cleaning the drain
pump”, Page 33 The water pressure is low. No remedial action possible. The
filters in the water inflow are blocked. Clean the filters in the water
inflow. The tap is turned off. Turn on the tap. The water inlet hose is kinked
or jammed. Ensure that the water inlet hose is not kinked or jammed. The
automatic voltage control system detects an unauthorised voltage under-usage.
No remedial action possible. Note: If the power supply is stable, the
programme continues to run as normal. Voltage under-usage may cause extension
of a programme. No remedial action possible. Detergent dosage is too high.
Immediate measure: Mix one tablespoon of fabric softener with 0.5 litres of
water and pour the mixture into the left-hand compartment (not for outdoor
clothing, sportswear or items stuffed with down). Reduce the amount of
detergent for the next washing cycle with the same load. The temperature is
too high. Wait until the temperature has dropped. “Cancelling the programme”,
Page 31 Water level is too high. Start the Drain programme. Laundry is caught
in the door. 1. Open the door again. 2. Remove any trapped laundry. 3. Close
the door. 4. Press to start the programme.
37
enTroubleshooting
Fault flashes.
All other error codes. “E:30/-20”
The appliance is not working.
The programme does not start.
Cause and troubleshooting Door is not closed. 1. Close the door. 2. Press to
start the programme. Malfunction Call the after-sales service.
“Customer Service”, Page 45 Solenoid valve defective. Call the after-sales
service.
“Customer Service”, Page 45 Detergent dosage is too high. Reduce the amount of
detergent for the next wash-
ing cycle with the same load. Additional water is added. Do not add any extra
water to the appliance while it
is operating. The mains plug of the power cord is not plugged in. Connect the
appliance to the power supply. The circuit breaker is faulty. Check the
circuit breaker in the fuse box. There has been a power cut. Check whether the
lighting in your kitchen or other
appliances are working. You have not pressed . Press . Door is not closed. 1.
Close the door. 2. Press to start the programme. Childproof lock is activated.
“Deactivating the childproof lock”, Page 32
/ is activated. Check whether / is activated.
“Buttons”, Page 22 Laundry is caught in the door. 1. Open the door again. 2.
Remove any trapped laundry. 3. Close the door. 4. Press to start the
programme.
38
Troubleshootingen
Fault
Cause and troubleshooting
The door cannot be opened.
is activated. Continue the programme by selecting Spin or
Drain and pressing .
The temperature is too high. Wait until the temperature has dropped. “Cancelling the programme”, Page 31
Water level is too high. Start the Drain programme.
Power failure. Open the door using the emergency release.
“Emergency release”, Page 44
The water is not drain- Drain pipe or water outlet hose is blocked.
ing.
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe
and water drain hose are
not kinked or trapped.
Drain pump is blocked. “Cleaning the drain pump”, Page 33
is activated. Continue the programme by selecting Spin or
Drain and pressing .
The water outlet hose is connected too high. Install the water outlet hose at
a maximum height of
1 metre.
Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand
compartment (not for outdoor clothing, sportswear or items stuffed with down).
Reduce the amount of detergent for the next washing cycle with the same load.
Unapproved extension installed on the water drain hose. Remove any unapproved
extensions from the water
hose. Connecting the appliance
Water is not flowing in. Detergent is not being dispensed.
You have not pressed . Press . The filters in the water inflow are blocked. Clean the filters in the water inflow.
39
enTroubleshooting
Fault Water is not flowing in. Detergent is not being dispensed. The spin
cycle runs several times.
The programme duration changes during the wash cycle.
No water is visible in the drum. Drum jerks after the programme starts.
Residual water is present in the compartment . Vibrations and movement of the
appliance whilst spinning.
Cause and troubleshooting The tap is turned off. Turn on the tap. The water
inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked
or
jammed. The unbalanced load detection system eliminates an imbalance by
repeatedly redistributing the laundry. Not a fault  no action required. Note:
When loading, where possible, place large and small items of laundry together
in the drum. Different sized items of laundry distribute themselves better
during the spin cycle. The programme operation is optimised electronically.
This may change the programme duration. Not a fault  no action required. The
unbalanced load detection system eliminates an imbalance by repeatedly
redistributing the laundry. Not a fault  no action required. Note: When
loading, where possible, place large and small items of laundry together in
the drum. Different sized items of laundry distribute themselves better during
the spin cycle. Foam detection system switches on a rinse cycle if foam build-
up is too high. Not a fault  no action required. Water is below the visible
area. Not a fault  no action required. Do not add any extra water to the
appliance while it
is operating. This is caused by an internal motor test. Not a fault  no
action required. Insert in compartment is blocked. “Cleaning the detergent
drawer”, Page 33
Appliance is not correctly aligned. Aligning the appliance The appliance feet
are not fixed. Secure the appliance feet. Aligning the appliance Transit bolts
have not been removed. Removing the transit bolts
40
Troubleshootingen
Fault Drum rotates, water does not flow in. Heavy foam build-up High spin
speed not reached.
The spin programme does not start.
Rushing, hissing noise.
Cause and troubleshooting Load detection is active. Not a fault  no action
required.
Note: The load detection can take up to two minutes. Detergent dosage is too
high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand
compartment (not for outdoor clothing, sportswear or items stuffed with down).
Reduce the amount of detergent for the next washing cycle with the same load.
A low spin speed is selected. The next time you run a wash cycle, set a higher
spin speed. is activated. Select the programmes that are suitable for the type
of fabric. Unbalance load detection system is using a reduced spin speed to
eliminate an unbalance. Redistribute the laundry in the drum.
Note: Where possible, mix large and small items in the drum. Different sized
items of laundry distribute themselves better during the spin cycle. Start the
Spin programme. Drain pipe or water outlet hose is blocked. Clean the drain
pipe and the water outlet hose. Drain pipe or water drain hose is caught or
jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped. The unbalanced load detection system has interrupted
the spin cycle because the laundry is unevenly distributed. Redistribute the
laundry in the drum.
Note: Where possible, mix large and small items in the drum. Different sized
items of laundry distribute themselves better during the spin cycle. Start the
Spin programme. Water is flushed under pressure into the detergent drawer. Not
a fault  normal operating noise.
41
enTroubleshooting
Fault
Cause and troubleshooting
Loud noises during the spin cycle.
Appliance is not correctly aligned. Aligning the appliance
The appliance feet are not fixed. Secure the appliance feet. Aligning the appliance
Transit bolts have not been removed. Removing the transit bolts
Persistent, quiet whirr- Active oxygen treatment is active.
ing fan noise.
Not a fault  normal operating noise.
Banging noises, rattling in the drain pump.
Foreign bodies have got into the drain pump. “Cleaning the drain pump”, Page 33
Slurping, rhythmical suction noise.
The drain pump is active, the detergent solution is pumped out. Not a fault  normal operating noise.
Creasing.
The spin speed is too high. The next time you run a wash cycle, set a lower
spin speed.
The load is too large. The next time you run a wash cycle, reduce the
amount of laundry being loaded.
The wrong programme is selected for the type of fabric. Select the programmes
that are suitable for the
type of fabric.
Detergent or fabric Too much detergent/fabric softener in the detergent
softener drips off the drawer.
seal and collects on When dosing liquid detergent and fabric softener,
the door or in the seal observe the marking in the detergent drawer and
fold.
do not dose above this.
The spin result is not satisfactory. The laundry is too wet/too damp.
A low spin speed is selected. The next time you run a wash cycle, set a higher
spin speed. Start the Spin programme.
is activated. Select the programmes that are suitable for the
type of fabric.
Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
42
Troubleshootingen
Fault
Cause and troubleshooting
The spin result is not satisfactory. The laundry is too wet/too damp.
Ensure that the drain pipe and water drain hose are not kinked or trapped.
The unbalanced load detection system has interrupted the spin cycle because
the laundry is unevenly distributed. Redistribute the laundry in the drum.
Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
Start the Spin programme.
Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum.
Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
Start the Spin programme.
Detergent residue on Detergents may contain water-insoluble substances the
damp washing. that deposit on the laundry.
Start the Rinse programme.
Detergent residue on Detergents may contain water-insoluble substances
the dry laundry.
that deposit on the laundry.
Brush out the laundry after washing and drying.
Water is leaking out at Water inlet hose is not correctly/securely connected.
the water inlet hose. 1. Connect the water supply hose correctly. Connect-
ing the water inlet hose 2. Tighten the screw connection.
Water is leaking out at The water outlet hose is damaged. the water outlet hose. Replace the damaged water outlet hose.
Water outlet hose is not connected correctly. Connect the water outlet hose
correctly. Water out-
let connection types
Odours have formed in the appliance.
Humidity and detergent residue may promote the formation of bacteria.
“Cleaning the drum”, Page 32 If you are not using the appliance, leave the
door
and detergent drawer open so that residual water can evaporate.
43
enTransportation, storage and disposal
17.1Emergency release
Releasing the door Requirement: The drain pump is empty. Page 33 1. ATTENTION!
Escaping water may
cause material damage. Do not open the door if you can
see water through the glass. Pull the emergency release downwards with a tool
and release.
3. Switch off the appliance. 4. Unplug the appliance’s mains plug. 5. Drain
the water.
“Cleaning the drain pump”, Page 33 6. Detach the hoses.
18.2Inserting the transit bolts
Secure the appliance for transportation using transit bolts in order to
prevent damage. 1. Use a screwdriver to remove the 4
cover caps.
a The door lock is released. 2. Insert the maintenance flap and
lock it into place. 3. Close the maintenance flap.
18Transportation, stor- Transportation,storageanddisposal age and disposal
You can find out here how to prepare Transportation,storageanddisposal your
appliance for transportation and storage. You will also find out how to
dispose of old appliances.
18.1Removing the appliance
Note: More detailed instructions for use can be found on www.siemenshome.bsh-
group.com or by scanning the QR code on the title page of this user manual. 1.
Turn off the water tap. 2. Empty the water inlet hose.
44
Keep the cover caps. 2. Install the 4 transit bolts. Refer to
the description Removing the transit bolts for this and proceed in reverse
order.
18.3Using the appliance again
For further information, see “Installation and connection”, Page 12 and
“Before using for the first time”, Page 19.
18.4Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING Risk of harm to health! Children can lock themselves in the appliance,
thereby putting their lives at risk. Do not install the appliance behind
a door as this may obstruct the appliance door or prevent it from opening.
With redundant appliances, unplug the power cord. Then cut through the cord
and damage the lock on the appliance door beyond repair so that the appliance
door will no longer close. 1. Unplug the appliance from the mains. 2. Cut
through the power cord. 3. Dispose of the appliance in an environmentally
friendly manner. Information about current disposal methods are available from
your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU
concerning used electrical and electronic appliances (waste electrical and
electronic equipment – WEEE). The guideline determines the framework for the
return and recycling of used appliances as applicable throughout the EU.
Customer Serviceen
19Customer Service CustomerService
If you have any queries on use, are CustomerService unable to rectify faults
on the appliance yourself or if your appliance needs to be repaired, contact
Customer Service. Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from Customer Service for a
period of at least 10 years from the date on which your appliance was placed
on the market within the European Economic Area. Note: Under the terms of the
manufacturer’s warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of warranty in your
country is available from our aftersales service, your retailer or on our
website. If you contact Customer Service, you will require the product number
(ENr.) and the production number (FD) of your appliance. The contact details
for Customer Service can be found in the enclosed Customer Service directory
or on our website.
19.1Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the
appliance’s rating plate. Depending on the model, the rating plate is located:
¡ On the inside of the door. ¡ On the inside of the maintenance
flap. ¡ On the rear of the appliance.
45
enCustomer Service Make a note of your appliance’s details and the Customer
Service telephone number to find them again quickly.
46
Consumption valuesen
20Consumption values Consumptionvalues
The Consumptionvalues following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456.
Programme
Load (kg)
Pro- Energy
gramm con-
e dura- sump-
tion
tion
(h:min)1 (kWh/
cycle)1
Water consumption (l/ cycle)1
Max- Spin imum speed temper- (rpm)1 ature (°C) 5 mins1
Residual moisture (%)1
Eco 40-602 9,0
3:37 1,245 61,0 49
1400 50,00
Eco 40-602 4,5
2:52 0,590 45,0 38
1400 50,00
Eco 40-602 2,5
2:33 0,195 30,0 24
1400 54,00
Cot-
9,0
tons 20 °C
3:28 0,370 90,0 23
1400 52,00
Cot-
9,0
tons 40 °C
3:28 1,350 90,0 45
1400 52,00
Cot-
9,0
tons 60 °C
3:28 1,450 90,0 55
1400 52,00
Easy
4,0
Care 40 °C
2:28 0,780 61,0 44
1200 27,00
Mixed Fab- 4,0 rics 40 °C
0:59 0,620 44,0 41
1400 53,00
Wool 30 ° 2,0 C
0:40 0,200 40,0 22
800
25,00
1 Due to the influence of water pressure, hardness and inlet temperature,
ambient temperature, type, amount and soiling of laundry, detergent used,
fluctuations in the power supply and the selected additional functions, the
actual values may deviate from the stated values.
2 Test programme in accordance with the EU Ecodesign Directive and the EU
Energy Labelling Regulation with cold water (15 °C).
21Technical specifica- Technicalspecifications tions
Technical specifications
Appliance height 84,8 cm 1 Depending on the appliance spe-
cifications
Appliance width 59,8 cm
Appliance depth 63,2 cm
Weight
72,9 kg1
Maximum load 9,0 kg
1 Depending on the appliance specifications
47
enTechnical specifications
Mains voltage
220-240 V, 50 Hz
Minimum in- 10 A stallation protection
Nominal power 2300 W
Power consumption
¡ Off mode: 0,10 W
¡ Left-on mode: 0,50 W
Water pressure
¡ Minimum: 100 kPa (1 bar)
¡ Maximum: 1000 kPa (10 bar)
Length of the wa- 150 cm ter inlet hose
Length of the wa- 150 cm ter outlet hose
Length of the power cable
210 cm
1 Depending on the appliance specifications
This product contains light sources from energy efficiency class F. These light sources are available as a spare part and must only be replaced by trained specialist staff. You can find more information about your model online at https:// eprel.ec.europa.eu/1. This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for models. The model identifier is made up of the characters before the slash in the product number (E-Nr.) on the rating plate. Alternatively, you can also find the model identifier in the first line of the EU energy label.
1 Only applies to countries in the European Economic Area 48
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home
.bsh-group.com
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances
Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT
United Kingdom
Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG
9001621141
9001621141
(010821)
en
References
- My Siemens - Your world of possibilities | Siemens Home
- Welcome to Siemens Home Appliances International