TANDELTA OQSx-G2 HAZ Oil Quality Ex-Sensor Pack User Guide
- June 13, 2024
- TANDELTA
Table of Contents
SENSOR I OQSx-G2 HAZ
QUICK START GUIDE
WHAT’S IN THE BOX?
CONFIGURE
- Plug in the configuration cable and allow the update/installation of drivers.
- Install CADS by scanning the QR code (right) or go to: www.tandeltasystems.com/support/
- Connect the sensor to the configuration cable.
- Run CADS and configure the sensor for the correct communications and oil type.
INSTALL
ORIENTATION
Not recommended for engines
**** Sensor may not function if installed incorrectly
CONNECT
ACTIVATION STEPS
Check installation
Power on
Wait for 1 minute
Check output
TROUBLESHOOTING
- Check configuration.
- Refer to Installation Drawing 401-0229 on USB
- Refer to Master User Guide: www.tandeltasystems.com/support
- Contact: support@tandeltasystems.com
INTERPRETING OIL CONDITION
SUPPORT – FAQ
If you have any issues, please read the tips below before contacting us for further support.
-
Where are the Cable X drivers?
The drivers for Cable X should install automatically. If needed, they are also available on the USB stick supplied with the product. -
Does the sensor require cleaning?
No, cleaning is required once the sensor is installed. However, when using the sensor for testing offline samples (i.e. MOT Kit), then cleaning between samples is essential. -
I cannot see my oil in the database, so I have used an oil which I believe is close, but the sensor isn’t working?
The sensor will exhibit a different response for every oil. For best results, it is advised to obtain an Oil Profile which Tan Delta will add to our Oil Database. Please complete and submit an Oil Profile Request Form online at www.tandeltasystems.com/oil-availability- checker/ -
Where can I obtain the EU and UK Declaration of Conformity?
The Declaration of Conformity (EU and UK) for the product are available on the USB supplied and can also be downloaded online at
www.tandeltasystems.com/products/oqsxg2hazsensor. -
I need help sourcing a suitable ATEX Barrier for my application?
Contact support@tandeltasystems.com and we will be happy to help.
You can find further information in the Master User Guide on the support page of our website. If you have any further questions, please contact our support team by email: support@tandeltasystems.com who will answer no later than the next working day.
Alternatively, refer to Master User Guide
available at:
www.tandeltasystems.com/support
www.tandeltasystems.com
support@tandeltasystems.com
Copyright © Tan Delta Systems PLC
References
- Tan Delta Systems - Tan Delta Systems PLC
- Oil Database - Tan Delta Systems PLC
- Support | Tan Delta Systems
- Support | Tan Delta Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>