tp-link tl-mc1400 14-Slot Rackmount Chassis Installation Guide
- June 13, 2024
- tp-link
Table of Contents
tp-link tl-mc1400 14-Slot Rackmount Chassis
Package Contents
Chassis, AC Power Cord, Fourteen Retainer-plates, Installation Guide
The pictures are for demonstration purposes only. The actual product may differ in appearance from the depicted.
Installation
Step 1: Install the Media Converters in the Chassis
Note:
It is recommended to use TP-Link media converters. Other vendors’ products may
be incompatible.
-
Tweak out the two screws on the media converter. Then install the retainer-plate (provided with the chassis) to the media converter using the screws removed from the media converter.
-
Remove the front metal plate of the slot on the chassis, then carefully slide the media converter into the slot and lock it tightly with the locking knob.
Step 2: (Optional) Install the Redundant Power Supply Module
Remove the protective cover on the power supply module slot of the chassis.
Then gently push in the module and plug it solidly into the connector.
Step 3: Mount the Chassis on the Rack
Note:
- The chassis supports EIA standard-sized, 19-inch racks.
- For security reasons, it is recommended to install the chassis as shown below
Fasten the chassis to the rack with screws through the holes of the brackets on each side.
Step 4: Power On
-
Electrically connect the Grounding Terminal on the rear panel of the chassis to ground via the ground cable.
-
Connect the chassis to the AC outlet using the provided power cord.
Panel Layout
LED Explanation
◯ Power
On: Power on
Off: Power of
◯ FAN
On: The fans are working properly.
Off: The fans are working abnormally
Specifications
AC Power Supply| Input: 100–240 V ~ 50/60 Hz 1.8 A (Max)
Output: 12 V, 6.25 A (Max) Ripple &
Noise: < 180 mV (0˚C to 50˚C); < 250 mV (-10˚C to 0˚C)
---|---
DC Power Output per Slot| TL-MC1400: 9 V/0.6 A TL-FC1420: 5 V/0.6 A
LED| Power, FAN
Dimensions (W×D×H)| 482 × 309 × 86 mm
Hot-swappable| Yes
Overload Protection| Yes
Specifications Environmental and Physical Specifications
Operation Temperature| TL-MC1400: 0˚C to 40˚C (32˚F to 104˚F)
TL-FC1420: 0˚C to 50˚C (32˚F to 122˚F)
---|---
Storage Temperature| -40˚C to 70˚C (-40˚F to 158˚F)
Operation Humidity| 10% to 90% RH non-condensing
Storage Humidity| 5% to 90% RH non-condensing
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
- The label is placed on the bottom surface of the product.
- Place the device with its bottom surface downward.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/ce.
Customers Support
To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community.
For technical support and other information, please visit https://www.tp- link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome to email techwriter@tp-link.com.cn.