NST SGINX15V2 15.6 Inch Laptop User Guide
- June 13, 2024
- NST
Table of Contents
NST SGINX15V2 15.6 Inch Laptop
Accessories
Quick installation
Use of laptop
Boot steps.
Sleep, restart and shut down.
Same experience as you use Desktop PC. Click the on the bottom taskbar, and then click the( ). Finally, in the pop-up menu options, you can choose hibernation, shutdown or restart.
Use WIFI to connect to the Internet
Wi-fi, Bluetooth, Flight mode
Touch to Open Setting Tablet to set up
Airplane mode/ WI-Fl/ & Bluetooth, and this device can connect to 2.4G and SG
Wifi.
cortana
****You can use Cortana ( voice control) to set reminders, write emails, search, and chat with friends and family on messengers.
System reset
Notice : The Reset progress will take around 3-5 hours, in order to finish the Reset successfully, please connect the adapter to charge the device during the whole Reset progress.
Click the left mouse button on the button in the lower left corner of the desktop. Select “Advanced options” ➔ select “Windows Update” ➔ select “Advanced options”, select “Recovery” ➔ select “Advanced startup” ➔ find “Restart now” and click the left mouse button ➔ select the “Restart now” button in the pop-up window;
BIOS-Setting & Bootmanager
Press and hold the” ESC” button of the keyboard immediately after switching on the device by pressing the power button. Then different options will appear. Choose the option “SCU “for BIOS setting and ” Boot Manager for the operating system boot option.
Battery charging
- Connect the power adapter to the power port of the device Connect the power adapter plug into a power outlet for charging the battery. Please only use the provided original power adapter.
- During charging, the icon of the battery will be, , and when charging completes, the icon will be ,.
- You can still use the device while charging, but this will extend the charging time. Use the device at least once a week.
- Fully charge the battery regularly.
- Do not leave the battery empty for a long time.
Troubleshooting
-
Can not turn on the device
Press the power button for 5 seconds to turn on the device. If the above method doesn’t work, please charge it for 30 minutes before starting. -
No sound from earphones
Check if the volume is set to “O”. Test if the earphone is broken, if so please change for another earphone. -
Big noise
Check if there is dust in the earphone or speaker. Check if the sound file is broken. -
screen drift or unresponsive screen
Switch off the device by a long press (approx. 30 sec.) of the power button. (Do not use this way to switch off the device unless it is necessary) -
Windows key cannot be active immediately
First, make sure the Wi-Fi is connected and the Wi-Fi network is a working network. Second, make sure the time zone and system time is correct in your location.
(Windows key active delay may happen sometimes because of the network speed or other reasons if you make sure the above two points are correct and the key still cannot be active. Kindly contact our service team, please. We will support you immediately) -
How to enter the desktop interface when first time starting up.
Follow the Microsoft Windows 7 0 starting up guide step by step to enter the desktop interface. -
Why my device has already been registered by account name of “default user 0”
This is a common software error that may happen in Windows 70 when the user starts up the device First, press the power button for 5-8 seconds to shut down the device. Do this 3 times, and then power on the device, below content will show up. -
Why when I press the keyboard character, in the system it show another one? This may happen because you choose the wrong language when you first time turn on the device. Below is the method to correct the language and input Choose windows home button at the left bottom side of the desktop.
-
Windows automatic update may cause some issues recently, below is the method of how to open or close the automatic update function. Click the mouse right
button(Laptop) on the windows home button at the left bottom side of the desktop. Choose ‘Task Manager” choose “More details, choose “Services”➔ choose “Open Serv ices”➔find “Windows Update” click mouse right button (Laptop) on it➔ choose “Properties”➔ find Startup type and choose the option you want. There are 4 options. Automatic (Delay Start)/ Automatic/Manual/Disabled.