CKESimpleKey GMHFL-7000-1 Buick Chevrolet and GMC Replacement Keys User Guide

CKESimpleKey GMHFL-7000-1 Buick Chevrolet and GMC Replacement Keys

Product Information

• Product Name: Simple Key
• Version: V4.0223
• Manufacturer: CKESimpleKey
• Part Number: GMHFL-7000-1

Important Notes

• To successfully perform these pairing instructions, an original, working key must be present. If an original, working key is not available, refer to the owner’s manual instructions for pairing without a working key.
• The new key blade MUST be cut prior to pairing. It can be cut at any automotive locksmith or car dealership.
• Vehicle battery should be in good condition and fully charged prior to pairing the new key. Turn off headlights, radio, A/C fan, etc. to minimize battery draw during the 30-minute process.
• This key will only work with key ignition vehicles. This key does not have passive entry features and will not work with push-button ignition systems.
• Only original remote features will work, regardless of buttons included on the Simple Key. This key does not add remote features that your vehicle did not have before.

Compatibility

The Simple Key is compatible with the following makes, models, and years:

Please visit CKESimpleKey.com for the most up- to-date vehicle compatibility list.

Product Usage Instructions

Key Pairing Instructions for Onboard Programmable Vehicles
NOTE: Instructions have timing requirements. If you wait too long between steps, your vehicle’s computer may time out, requiring you to start over. Once you begin the pairing procedure, move at a quick and even pace.

1. Insert an original, already paired key into the ignition and turn the key to the ON/RUN position. The security light will turn on.
2. When the security light turns off, turn the key to the LOCK/OFF position and remove the key.
3. Insert the new key in the ignition and turn it to the ON/RUN position within 5 seconds. The security light will turn on. The security light will turn off once the key has been paired.
4. Test the key. Remove it from the ignition, reinsert it, and start the vehicle.
5. Repeat steps 1-4 for any additional keys to be paired.

Key Pairing Instructions for Onboard Programmable Vehicles with the Symbol ^
NOTE: This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the keys you wish to program must be with you. It’s strongly encouraged to turn off any components that will draw power from your battery during this process like the radio or air conditioning. If you have a battery charger to connect to your battery that will be best.
Unfortunately, the user manual does not provide specific key pairing instructions for onboard programmable vehicles with the symbol ^. Please refer to the owner’s manual or contact the manufacturer for detailed instructions on how to pair the new key with your specific vehicle.

IMPORTANT NOTES

• To successfully perform these pairing instructions, an original, working key must be present. If an original, working key is not available, refer to the owner’s manual instructions for pairing without a working key.
• The new key blade MUST be cut prior to pairing. It can be cut at any automotive locksmith or car dealership.
• Vehicle battery should be in good condition and fully charged prior to pairing the new key. Turn off headlights, radio, A/C fan, etc. to minimize battery draw during the 30-minute process.
• This key will only work with key ignition vehicles. This key does not have passive entry features and will not work with push-button ignition systems.
• Only original remote features will work, regardless of buttons included on the Simple Key. This key does not add remote features that your vehicle did not have before.
• Before pairing, familiarize yourself with the Simple Key’s compatibility with the make, model, and year of your vehicle below.

COMPATIBILITY LOOKUP

BUICK+

CHEVROLET+

Impala                                                  2014-2016

Impala^| 2017
Malibu| 2013-2016
Sonic| 2012-2016
Sonic^| 2017-2018
Spark| 2016
Spark^| 2017-2018
Trax| 2015-2016
Trax^| 2017-2018

GMC+

Visit CKESimpleKey.com for the most up-to-date vehicle compatibility list.

• If your vehicle came with a smart or proximity key, this Simple Key is not compatible with your vehicle.
• If you have TWO WORKING KEYS proceed to the next step. If you only have one working key, go to page 4 for pairing steps.

KEY PAIRING INSTRUCTIONS – ONBOARD PROGRAMMABLE VEHICLES

NOTE: Instructions have timing requirements. If you wait too long between steps, your vehicle’s computer may time out, requiring you to start over. Once you begin the pairing procedure, move at a quick and even pace.

1. Insert an original, already paired key into the ignition and turn the key to the ON/RUN position. The security light will turn on.
2. When the security light turns off, turn the key to the LOCK/OFF position and remove the key.
3. Insert the new key in the ignition and turn it to the ON/RUN position within 5 seconds. The security light will turn on. The security light will turn off once the key has been paired.
4. Test the key. Remove it from the ignition, reinsert it, and start the vehicle.
5. Repeat steps 1-4 for any additional keys to be paired.

ONBOARD PROGRAMMABLE VEHICLES WITH THE SYMBOL ^

• NOTE: This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the keys you wish to program must be with you. It’s strongly encouraged to turn off any components that will draw power from your battery during this process like the radio or air conditioning. If you have a battery charger to connect to your battery that will be best.
• NOTE: Instructions have timing requirements. If you wait too long between steps, your vehicle’s computer may time out, requiring you to start over. Once you begin the pairing procedure, move at a quick and even pace.

1. Insert the new key into the ignition and turn the key to the ON/RUN position. The security light will turn on.
2. Find the Security light on your dashboard cluster. Wait 10 minutes for the security light to turn off.
3. Turn the key to the LOCK/OFF position.
4. Again turn the key to the ON/RUN position. The security light will turn on.
5. Wait 10 minutes for the security light to turn off.
6. Turn the key to the LOCK/OFF position.
7. For the last time, turn the key to the ON/RUN position. The security light will turn on.
8. Wait 10 minutes for the security light to turn off.
9. Turn the key to the LOCK/OFF position.
10. Test the new key. Turn your new key to start the vehicle.

FREQUENTLY ASKED QUESTIONS

• Q: After completing the pairing instructions, the key still does not work with my vehicle.
  A: It is possible your vehicle was manufactured in Canada. Canadian GM vehicles require diagnostic equipment or a professional locksmith to pair. Please call Car Keys Express customer service at 888-598-8910.

• Q: The vehicle won’t start with the new key or old keys after attempting to pair.
  A: Please call Car Keys Express customer service at 888-598-8910.

FCC AND ISED REGULATORY STATEMENTS

• This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this device not expressly approved by iKeyless LLC could void the user’s authority to operate the equipment.

HELP

For help or assistance, please contact technical support at: 888-598-8910.

OTHER KEYS

Visit CarKeysExpress.com to find a variety of award-winning products, like Universal Car Keys, Universal Car Remotes, and OEM keys and remotes. New Chrysler, Dodge, Jeep, Ram, Nissan, and Infiniti Simple Keys are coming soon.

ABOUT COMPANY

• Patent US10755506B2
• Designed and assembled in the USA
• 12101 Sycamore Station Place Ste. 140 Louisville, KY 40299
• © 2023 Car Keys Express
• www.CKESimpleKey.com

References

• Car Keys Express - Discount Key Replacement
• Simple Key
• Simple Key

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>