T248 Auto Calibration Wheel Centering User Manual

T248 Auto Calibration Wheel Centering

AUTO-CALIBRATION AND WHEEL CENTERING

CHECKING AND RESETTING THE RACING WHEEL’S CENTER VALUE

Checking the racing wheel’s center value:

• On PC, access the Control Panel, then adjust the rotation angle to 900°.
• Place your racing wheel’s axis on the 50% marker, then check that your racing wheel is physically perfectly centered.

Reconfiguring the racing wheel’s center value
(If the racing wheel is slightly off-center in the Control Panel)

• If using a PS4/PS5 , we recommend performing this procedure in the PS4/PS5 system’s menu (not in a game).
• If using a PC, we recommend performing this procedure via the Windows® Desktop (not in a game), after exiting the Control Panel.

1. Connect the racing wheel’s USB cable (on PS4/PS5 or on PC), then wait for the auto-calibration phase to end.
2. Turn the racing wheel fully to the left ( until you reach the stop ).
3. Turn the racing wheel fully to the right ( until you reach the stop ).
4. Make sure that your racing wheel is perfectly centered: while holding it in this position, press the SHARE-CREATE, OPTIONS and MODE buttons simultaneously until SAVE appears on the racing wheel’s screen.

This means that the wheel’s center value has been reset and automatically saved to the device’s internal memory (you do not need to repeat the procedure every time you connect the racing wheel).

YOU ARE NOW READY TO RACE.

Documents / Resources

| T248 Auto Calibration Wheel Centering [pdf] User Manual
Auto Calibration Wheel Centering, Calibration Wheel Centering, Wheel Centering, Centering
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>