COOKOLOGY CET301 Built In Ceramic Hob Instruction Manual
- June 4, 2024
- COOKOLOGY
Table of Contents
Built In Ceramic Hob
Instruction Manual
CET301
Warning
- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction. children being supervised not to play with the appliance.
- WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock, for hob surfaces of glass-ceramic or similar material which protect live parts.
- WARNING: a steam cleaner is not to be used。
- That the appliance is not intended to be operated by means of an external timer or separate remote-control system.
- The danger of fire: Do not store items on cooking surfaces.
- CAUTION: The cooking process has to be supervised. A short-term cooking process has to be supervised continuously.
- WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. children shall not play with the appliance. cleaning and user maintenance shall not be made by children without supervision.
- WARNING: The appliance and its accessible parts become hot during use.
- Care should be taken to avoid touching heating elements.
- Children less than 8 years of age shall be kept away unless continuously supervised.
- WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
- NEVER try to extinguish a fire with water, but switch off the appliance and then cover the flame e.g. with a lid or a fire blanket.
- CAUTION: The cooking process has to be supervised. A short-term cooking process has to be supervised continuously.
- WARNING: Danger of fire: do not store items on cooking surfaces.
- WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
- The power cord can’t accessible after installation.
DEAR CUSTOMER
The hob is exceptionally easy to use and extremely efficient. After reading
the instruction manual for operating the hob will be easy
Before being packaged and leaving the manufacturer, the hob was thoroughly
checked with regard to safety and functionality
Before using the appliance, please read the instruction manual carefully. By
following these instructions carefully you will be able to avoid any problems
in using the appliance.
It is important to keep the instruction manual and store it in a safe place so
that it can be consulted at any time.
It is necessary to follow the instructions in the manual carefully in order to
avoid possible accidents.
Caution!
Do not use the hob until you have read this instruction manual.
The hob is intended for household use only.
The manufacturer reserves the right to introduce changes that do not affect
the operation of the appliance.
SAFETY INSTRUCTIONS
Ensure there is a grounded socket nearby(behind the unit)
A dedicated power circuit is recommended for the unit but not required.
Additional electrical appliances on the same circuit may exceed the
current(amperage) rating for that circuit. If after the installation of your
unit. the circuit breaker trips or the fuse fails on a repeated basis, then a
dedicated circuit will likely be required.
The appliance must be installed only by a qualified person in compliance with
the instructions provided. Incorrect installation may cause harm to persons,
and animals or may damage property.
The manufacturer declines all responsibility for improper installation which
may harm persons and animals and damage property.
The power supply to the appliance must be cut off before any adjustments or
maintenance work is done on it.
Your electric heat stove is a classified electrical appliance. As with any
electrical appliance and particularly with electric heaters, basic precautions
must be followed in order to reduce the risk of fire, burns, electrical
shocks, or other serious injuries or death.
The appliance becomes hot during operation. Take care not to touch the hot
parts of the electric heat stove.
Always keep children away from the hob. While in operation direct contact with
the hob may cause burns!
Ensure that small items of household equipment, including connection leads, do
not touch the hot hob or the hob as the insulation material of this equipment
is usually not resistant to high temperatures.
Do not leave the hob unattended when frying. Oils and fats may catch fire due
to overheating or boiling over.
Do not use the hob in the event of a technical fault. Any faults must be fixed
by an appropriately qualified and authorized person.
In the event of any incident caused by a technical fault, disconnect the power
and report the fault to the service center to be repaired.
The rules and provisions contained in this instruction manual should be
strictly observed. Do not allow anybody who is not familiar with the contents
of this instruction manual to operate the hob.
Cabinets with a veneer exterior must be assembled with glues which can
withstand temperatures of up to 100 ℃.
If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
Use this do not touch the hot hob only as described in this manual. Any other
use not recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
HOW TO SAVE ENERGY
Using energy in a responsible way not only saves money but also helps the
environment. So let’s save energy! And this is how you can do it:
Do not install the hob in the direct vicinity of refrigerators /freezers.
Otherwise, energy consumption increases unnecessarily.
DISPOSAL OF THE APPLIANCE
Old appliances should not simply be disposed of with normal household waste
but should be delivered to a collection and recycling center for electric and
electronic equipment. A symbol shown on the product, the instruction manual,
or the packaging shows that it is suitable for recycling.
Materials used inside the appliance are recyclable and are labeled with
information concerning this. By recycling materials or other parts from used
devices, you are making a significant contribution to the protection of our
environment.
Information on appropriate disposal centers for used devices can be provided
by your local authority.
UNPACKING
** During transportation, protective packaging was used to protect the
appliance against any damage. After unpacking, please dispose of all elements
of packaging in a way that will not cause damage to the environment.
All materials used for packaging the appliance are environmentally friendly;
they are 100% recyclable and are marked with the appropriate symbol.
Caution!**
During unpacking, the packaging materials ( polythene bags, polystyrene
pieces, etc. ) should be kept out of reach of children.
PRODUCT DESCRIPTION
Top View
A)
1.80kW rapid plate (Ø190mm)
B) 1.20kW rapid plate (Ø155mm)
Control Panel
Product dimensions:
| Depth: | 510mm |
|---|---|
| Width: | 290mm |
| Height: | 50mm |
Aperture dimensions:
| Depth: | 480mm |
|---|---|
| Width: | 260mm |
Product specifications:
- 1x 1.80 kW rapid plate (Ø190mm)
- 1x 1.20 kW rapid plate (Ø155mm)
Electrical details
| Rated Voltage: | 220-240Vac, 50/60Hz |
|---|---|
| Supply Connection: | 13A (double pole switched fused outlet with 3mm contact |
gap)
Max Rated Inputs:| 3.00kW
Mains Supply Lead:| 3 core x 1.5m²
INSTALLATION
Important:
There must be a minimum distance of 100 mm between the edges of the cut hole
in the bench top and the adjoining cabinet walls and 65mm from the rear wall
of the cabinet.
Preparation
- Remove any dust from the benchtop directly surrounding the cut hole to ensure there is a clean surface.
- Remove the protective paper film from the adhesive strip that is secured to the bottom of the glass surface.
- Position the cooktop into the hole in the benchtop and press down firmly to ensure a secure fit to the benchtop.
OPERATION
Choice of cookware
Choose a pan with a diameter that is at least as large as the heating zone.
For roasting tins, there is a special widened heating zone of 140×250. Do not
use pans with a concave or convex base.
Always remember to put a proper cover on the pan. We recommend the use of pans
with thick, even bases.
If the heating zones and pans are solid it is impossible to make full use of
the heat.
Heat level selection
| Display | Description | Explanation |
|---|---|---|
| Control key for the corresponding heating element | By pressing any of the 2 |
Control Keys, the corresponding hotplate is selected for
operation. The respective LED Display for that hotplate will flash for 6
Seconds on setting
9(continues operation) and the hotplate will activate after the display stops
flashing.
Pressing the corresponding Control Key twice in succession will terminate
hotplate operation.
| Plus and minus key of Hot plate level or timer| In conjunction with the
Control Keys and within the 6 seconds LED flash period, a chosen hotplate
heating level will increase from setting 0 to 9 by pressing the – or +
selector key.
When it is a timer, it’s will increase or reduce.
| Residual heat indicator| With the hotplate operation terminated, this symbol
will show in the LED Display for the
corresponding hotplate when this area is still hot and will disappear when an
area has cooled down enough to touch.
| Timer| For a chosen hot plate with LED lighting, press the Timer key, and
the Timer of the LED for this plate will twinkle. By pressing – or +, time
will be changed.
| Child Lock Key| Press the Child Lock Key for 3 Seconds to deactivate the
Child Lock and allow the use of the
Control Keys to operate hotplates.
| Power ON/OFF key| After connecting to the power, press the key, the hob is
ready, you can select the zone that you want.
Pressthekeywhilethehobis working at any time, the hob will be off immediately.
MAINTENANCE&TROUBLESHOOTING
Caution!
Before maintenance or cleaning is carried out, the cooktop should be
disconnected from the main power supply. Ensure that the cooktop is switched
off at the wall socket and the plug removed.
- Spills and splashes will not harden and stick to the glass, as it hardly heats up.
- Micro crystal board surrounding should maintain clean, if have leakage to it as soon as possible please clean.
- Slight stains can be removed with kitchen paper or cloth.
- More resistant stains will need specific products for vitro-ceramic glass.
Follow each product’s inductions.
Important!
- Do not use abrasive products or cleaning powders as these could scratch the hob.
- Do not use a steam cleaner.
- If any cracks should appear on the surface of the glass, unplug the appliance immediately.
- Do not use any part of the hob until a new vitro-ceramic glass has been installed.
| Problem | Check and eliminate |
|---|---|
| Switch on the power, the cooking ring is selected but not heating up. | 1, Is |
the power cord connected to 1
2, Please check the switch, socket, and fuse are in working order
While in use rings have stopped heating| Heating safety protection, Turn off
the hob please wait a few minutes and try again
For a small fault please check the above table to see if it can be resolved
quickly.
After checking the fault with the table and the hob is still not working
correctly, please contact the manufacturer .
Please do not try and carry out repairs yourself.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>