SoundCore Liberty Neo True-Wireless Earbuds A3911 User Manual

: June 13, 2024
: Soundcore

Table of Contents

SoundCore Liberty Neo True-Wireless Earbuds A3911
What’s In The Box
Wearing
Charging
Turn On / Off
Pairing
True Wireless Stereo connection (Earbuds)
Controls
Reset
Specifications
Support Videos
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SoundCore Liberty Neo True-Wireless Earbuds A3911

USER MANUAL

Product Number A3911, A3911L, A3911R

What’s In The Box

In The Box

Wearing

2. Insert the earbuds into the inner canal of your ears.
3. Turn to lock.

Remove the film on the earbuds when taking them out of the charging case for the first time.
If all the jackets are too large, Soundcore Liberty Neo can be used without jackets

Charging

Charge the charging case before using the earbuds for the first time. Place the earbuds in the charging case before you start charging.
Clean the charging pin on a regular basis to prevent connection issues.
Open or close the charging case to activate the LED battery indicator on the charging case.

Earbud status indicator

Flashing red (once every minute)	Low battery
Steady white	Charging
Off	Fully charged

To preserve battery lifespan, fully charge at least once every 45 days.

Turn On / Off

1. The earbuds switch on automatically when taken out of the charging case. To manually switch on the earbuds, press and hold the multifunction button for 1 second until the indicator blinks white on both earbuds.

ON	Flashing white once (Earbud status indicator)

2. The earbuds switch off automatically when placed back in the charging case. To manually switch off the earbuds, press and hold the multifunction button on both the earbuds for 5 seconds until the LED indicator turns red.

OFF	Flashing red once (Earbud status indicator)

Pairing

Bluetooth connection (Device)
Enter pairing mode when earbuds are switched on

Rapidly flashing white	Pairing mode
Slowly flashing white	Connected to a device

True Wireless Stereo connection (Earbuds)

Enter True Wireless Stereo pairing mode when earbuds are switched on.

Rapidly flashing white (Right earbud)
Flashing white (Left earbud)| True Wireless Stereo is connecting (The left earbud is connecting to the right earbud) but earbuds are not connected to your device
---|---
Rapidly flashing white (Right earbud)
Slow flashing white (Left earbud)| True Wireless Stereo connection is successful (The left earbud is connected to the right earbud) but earbuds are not connected to your device
Slow flashing white (Both earbuds)| True Wireless Stereo connection is successful (Theleft earbud is connected to the right earbud) and earbuds are connected to your device

Controls

Reset

Reset the earbuds if you can only hear sound on one side:

1. Open the Bluetooth list on your mobile device and delete “Soundcore Liberty Neo”.
2. Make sure charging case still has enough power, place theearbuds into the charging case, press and hold the multifunction button on both earbuds for 8 seconds until the LED indicator rapidly flashes red three times, then release the button.
3. Take both earbuds out of the charging case at the same time, the left earbud will automatically connect to the right earbud. The connection is successful if the left earbud flashes slowly and the right earbud flashes rapidly. If the connection was unsuccessful, repeat steps 2-3 until the connection is successful.
4. Open the Bluetooth menu on your mobile device, search for “Soundcore Liberty Neo”, then tap to select it.

Specifications

Specifications are subject to change without notice.

Earbud Input Rating	5 V 0.3 A
Charging Box Input Rating	5 V 0.5 A
Charging time	1.5 hours
Playtime (varies by volume level and content)	5 hours
Weight (product net weight)	51 g / 1.8 oz
Impedance	16 Ω
Driver (full range)	6 mm × 2
Frequency response	20 Hz – 20 KHz
Bluetooth version	V5.0
Range	10 m / 33 ft

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.