TGM-I27FQ Gaming Monitor User Guide

TGM-I27FQ Gaming Monitor

Product Information

The product is a projector with an AC adapter. It has a menu button that can be used as a shortcut when the menu is closed. The projector light is 68.467 in size and the input source includes USB5VDC 0.5A Type-C5VDC 3A.

Product Usage Instructions

1. Make sure to use the AC adapter provided with the product. Do not use the power cord with other products.
2. To access the menu, press the menu button.
3. When the menu is closed, the menu button can be used as a shortcut.
4. Connect the input source, such as USB5VDC or Type-C5VDC, to the projector.
5. The projector supports various resolutions and refresh rates. Choose the appropriate resolution and refresh rate based on your preference or requirements.
6. For example, you can set the resolution to 1280×720 and refresh rate to 60Hz for optimal viewing.
7. Refer to the provided table to select the desired resolution and refresh rate combination.

[IMPORTANT INFORMATION)

Please read this manual carefully.
This document contains all relevant safety regulations. Any non-conforming use may result in personal injury or mechanical damage.

• Please always place this device on a stable surface; otherwise, it may fall and be damaged.
• Do not hold the plug with wet hand; otherwise, electric shock may occur. Make sure the plug has a good touch because poor touch may cause fier.
• Do not use a broken power plug nor keep a power cord near heat source; otherwise, electric shock or fire may occur.
• When cleaning the device, be sure to remove the power plug, use a piece of soft cloth rather than industrial chemical to clean the device, be sure not to let water enter the device.
• Do not disassemble this device without permission. In case of failure, be sure to contact a professional servicing person to fix it. The unauthorized disassembly of this device may result in electric shock or fire.
• In case of rare smell or noise out of this device, be sure to immediately cut off the power supply and ask a professional servicing person to fix the problem.
• Failure to comply with or ignore any safety requirements, assembly instructions, user operations and related warnings may result in serious personal injury or mechanical damage. Please operate and Before assembly, I really understand the relevant regulations. This product is not a toy. Please be careful.
• Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
• If your equipment uses an AC adapter:
  • Only use the AC adaptor provided with your product.
  • Do not use the power cord with other products.
• This product is not intended for use by young children without supervision.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• Cleaning and user maintenance shall not be made by children without supervision.
• The device with AC switch may use such AC switch as cut-off component.
• The device without AC switch may use power plug or coupler as cut-off component.
• In case of the normal use of the equipment, make sure the cut-off component can be accessed easily.
• Failure to comply with or observe all assembly, safety and operation instructions and warnings regarding the use of this product may result in serious bodily injury.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• Please place the product away from corrosive gas, water and dusty environment.
• Alteration or modding of any factory components outlined in the checklist will automatically void your warranty.
  Warning! Overuse of screens is likely to affect eyesight.

Recommendations:

1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2 years and over, screen time should be limited to less than one hour per day.

ACCESSORIES

Power cord/Adapter/Signal cable/Base/Stand/User manual/Warranty card and certificate of conformity (The above pictures are for illustration only and the physical accessories shall govern.)

1. **Angle Adjustment

**

2. The screen can be adjusted by inclining forward and backward: however, the specific adjustment depends on the specific model of the device. Generally, it may be inclined 5‡2° forward and 15‡2° or 20‡2° backward.

3. When adjusting the angle of the monitor, be sure not to touch or press the area of the screen.
   The above pictures are for illustration only and the physical accessories shall govern.

4. Schematic diagram of disassembly and assembly of the wire cover

   • **disassemble

**

  *  **Install

**

CONNECT THE MONITOR TO PC

Before connectiong the LCD monitor to the PC, please power down the PC and the monitor.

1. Power Plug
   Connect the power cord of the monitor into the POWER port in the back of the monitor.

Warning:
Always use the power cord of standard configuration.

2. AUDIO Port
   Connect the AUDIO cable into the AUDIO OUT port into the back of the monitor (this needs the support of the monitor).

3. HDMI Port
   Connect the HDMI cable into the HDMI IN port into the back of the monitor (this needs the support of the monitor).

4. DP Port
   Connect the DP cable into the DP IN port into the back of the monitor (this needs the support of the monitor).

5. Type C Port
   Connect the Type C cable into the Type C IN port into the back of the monitor (this needs the support of the monitor).

6. USB IN Port
   Connect the USB cable into the USB IN port into the back of the monitor (this needs the support of the monitor).

7. USB OUT Port
   Connect the USB cable into the USB OUT port into the back of the monitor (this needs the support of the monitor).

USER SETUP

Schematic Diagram of Keys

Description of Keys’ Functions

Note: The physical keys of the specific model shall govern.

USER SETUP

Input Source

• USB：5VDC 0.5A
• Type-C：5VDC 3A

SIMPLE PROBLEM HANDING GUIDE(FAQ)

PRODUCT SPECIFICATIONS

TABLE OF PRODUCT PRESET MODES

Note: The actual application of the above parameters shall be subject to the specific model.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>