SoundCore Life P2 True-Wireless Earbuds A3919 User Manual

: June 13, 2024
: Soundcore

Table of Contents

SoundCore Life P2 True-Wireless Earbuds A3919
Charging
Powering On/Off
Pairing
Bluetooth Pairing with your Device
Wearing
Controls
Reset
Specifications
Support Videos
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SoundCore Life P2 True-Wireless Earbuds A3919

SoundCore Life P2 True-Wireless Earbuds

USER MANUAL

Charging

Remove the protective film from the earbuds when using for the first time.
Fully charge both the earbuds and the charging case before the first-time using.
To prevent damage, use the provided USB-C cable.
Fully dry off the earbuds and the USB port before charging.

Charging

LED behaviour (Earbuds & Charging case)

Steady white	Being Charging
Light off	Fully charged

Remaining battery >10% (when in use)

Powering On/Off

The earbuds will automatically power on when taken out of the charging case and power off when placed back into the charging case.

On/Off

LED behaviour (Earbuds)

ON	Steady white for 1 second
OFF	Steady red for 1 second

To manually power on, press the multi-function button on either one of the earbuds.
To manually power off, press and hold the multi-function button on either one of the earbuds for 3 seconds.

Pairing

True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the charging case.

LED behaviour (Earbuds)

Breathing white	TWS connecting
Steady white for 1 second	TWS connected

When powered off, press and hold the multi-function button on both earbuds for 1 second, the earbuds will enter TWS connecting mode.
When powered on and connected, place either one of the earbuds into the charging case, you can keep using the other one.
When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
When you are on a call, place either one of the earbuds into the charging case, 3 to 5 seconds later, the microphone in the other earbud will be activated.

Bluetooth Pairing with your Device

The earbuds will enter pairing mode when powered on. You are requested to confirm the connection when you see a pop-out screen.

Bluetooth Pairing

LED behaviour (Earbuds)

Flashing white	Bluetooth pairing
Steady white for 1 second	Bluetooth connected

In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary- Secondary dual pairing names, it may notice “connection unsuccessful” when you tap “Pair” or even no screen popped out. Don’t worry and it will not influence the using.

Once successfully paired, the primary earbud connects with your device and transfers signal to the secondary earbud, the latter one will not connect with your device. As a result, in the Bluetooth pairing list on your device, it may indicate that only one side is connected while the other side is not.

To pair with another Bluetooth device, turn off Bluetooth on the currently connected device first.
Each time you power on your Soundcore earphones, it will automatically connect to your last successfully connected device if available within the Bluetooth range.

Wearing

1. Choose the ear tips that fit your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and find the most comfortable position.

Controls

Reset

Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect with your device properly.

1. Place the earbuds into the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 3 seconds until the LED indicators flash red 3 times and then turn white.

All the memory data will be cleared.

Specifications

Specifications are subject to change without notice.

Input	5 V 500 mA
Rated output power	7 mW @ 1% THD
Battery capacity	55 mA x 2 (earbuds); 700 mA (charging case)
Charging time	2 hours
Playtime (varies by volume level and content)	7 hours (Totally 40 hours with