CENTEK CT-1748 Freezer Refrigerator Instruction Manual

CT-1748, СТ-1749, СТ-1750 INSTRUCTION MANUAL
FRIDGE
CT-1748

CT-1748 Freezer Refrigerator

DEAR CUSTOMER,
Thank You for purchasing a CENTEK brand product.
We guarantee flawless function of this item, provided the guidelines of its operation are observed.
The refrigerator is a household appliance and is not intended for industrial use!
This appliance is designed for use in domestic and similar applications, in particular:

• in personnel kitchen zones at stores, offices and industrial facilities;
• at agricultural farms;
• by clients at hotels, motels and other residential facilities;
• in private boarding houses.

PURPOSE OF THE APPLIANCE: For food cooling and/or freezing in a heat-insulated chamber at low temperature.

SECURITY MEASURES

The device you purchase compiles with all official safety standards applicable to electrical appliances in the Russian Federation.
To ensure safety and extend the service life, carefully read this manual and the markings before using the device and follow the following safety instructions.
Save these instructions for future reference.
ATTENTION!
Failure to comply with these safety measures may lead to accidents.

• Use only a 220-240 V, 50 Hz power supply.

• When connecting, try not to use adapters and extension cords.

• Do not store flammable materials (gasoline, glue, ether, etc.) in the refrigerator.

• Do not pour water on the refrigerator, as this may be dangerous for you, and may also cause the refrigerator to break down.

• If you notice unusual noise, smell or smoke during operation of the device, or other unusual signs of the device, it is necessary to turn off the power and contact the service representatives.

• Avoid damaging the power cable:

• Do not replace the power cable.

• Do not place heavy objects on the power cable.

• Keep the power cable away from heat sources.

• When disconnecting the refrigerator from the mains, pull the plug, not the power cord.

• The refrigerator is designed for indoor use.Don’t use it outdoors in no case.

• The refrigerator should be used at home to store food in accordance with these instructions.

• Do not allow children to use the appliance unattended.

• The refrigerator is a large-sized household appliance, it will take at least two people to transport it.

• Do not touch the refrigerator with wet hands.

• Do not use extension cords, tees and adapters to avoid fire or damage to the device. The manufacturer is not responsible for fires that occurred due to the use of adapters and extension cords, as well as a connecting cable whose cross section does not correspond to the power consumption. 12.
  When installing the refrigerator, it is necessary to check the compliance of the network characteristics and electrical parameters indicated on a special plate on the back of the refrigerator.

• Do not remove the plug from the outlet by the wire: this is very dangerous.

• Do not move the appliance close to the mains plug.

• If the power cord is damaged, it should be replaced with a special cord or kit provided by an authorized service center. Cable replacement should only be carried out by qualified personnel. Connect the device to an electrical outlett that has a serviceable protection device (circuit breakers,fuses,ect.).

• Do not touch the internal cooling surfaces of the refrigerator.

• Disconnect the refrigerator from the mains before performing any cleaning or maintenance operations. Setting the thermostat knob to the «ВЫКЛ» (OFF) not enough to ensure electrical safety.

• It is prohibited to change the design of the refrigerator and the intervention of persons not authorized by the manufacturer for warranty repairs.

• Do not use electrical appliances inside the food storage compartment unless recommended by the manufacturer.

• Do not store flammable gases or liquids inside the refrigerator.

• Do not store glass bottles and cans of liquid in the freezer.

OPERATING RECOMMENDATIONS

• Do not connect too many appliances to the same power supply circuit, as this may cause a fire.
• If you do not plan to use the refrigerator for a long time, disconnect its power plug from the outlet.
• Do not touch the inner walls of the low-temperature compartment or the products lying in it with wet hands.
• Do not put bottles or other glass vessels in the low-temperature compartment.

TRANSPORTING THE REFRIGERATOR
When moving or handling the refrigerator always grab it by the bottom and move vertically. Do not slant the refrigerator by more than 45°. Never tip the refrigerator over. Do not lay the appliance on its sides or back. Never transport the refrigerator in a horizontal position, i.e. lying on the sides, back or front side.
Do not use the door as a carrying aid. This can cause the appliance to fail. In order to move over and position the appliance within a kitchen, etc. gently slant the refrigerator towards the back side and move it. The two front legs of the refrigerator are adjustable in height. Rotate the front feet to left or right to level the refrigerator, so that it stands firmly on the floor.
WARNING!

• Cooling in the refrigerator is provided by a refrigerant that is filled into the refrigerator using special equipment. Do not damage the refrigerant circulation tubes on the back of the refrigerator.
• This product contains a small amount of refrigerant, which is isobutane, a natural gas that does not harm the environment, but is flammable. When transporting and installing the refrigerator, care must be taken not to damage any parts of the refrigerant circuit.
• Coming out of the tubes, the refrigerant can ignite or harm your health. If damage to the refrigerant circuit does occur, avoid any kind of open fire or potential sources of ignition, and ventilate the room where the refrigerator is located for a few minutes.
• In order to avoid the formation of a flammable mixture of gas and air in the event of a refrigerant leak, the dimensions of the room where the refrigerator is located must correspond to the amount of refrigerant used in the refrigerator.
• The volume of the room should be 1 m3 for every 8 g of refrigerant R600a in the refrigerator. The amount of refrigerant contained in your particular refrigerator is indicated on the nameplate on the back of the refrigerator.
• Never turn on the refrigerator with signs of damage. If you have any doubts about the serviceability of the product, contact customer service.

SCOPE OF SUPPLY

• Refrigerator – 1 pc.
• Glass shelf for cooling chamber – 3 pcs.
• Freezer container – 6 pcs.
• Door shelf: СТ-1748, 1750 – 6 pcs., СТ-1749 – 5 pcs.
• Vegetable and fruit container – 1 pc.
• Egg tray – 2 pcs.
• Water tank (for model СТ-1749) – 1 pc.
• Ice cube mold – 1 pc.
• User Manual – 1 pc.

APPLIANCE DESCRIPTION

on/off button
| «Fast Cooling» function indicator
---|---
| «Keep Fresh» function indicator
| «Fast Freezing» function indicator
| «Vacation» function indicator
| «Smart» function indicator
| «Child Lock» function indicator
| Frequency converter pilot light
| – Cooling chamber zone indicator
– Freezing chamber zone indicator
| Numeric display
°C| Temperature indicator

INSTALLING THE REFRIGERATOR

Correct installation of the refrigerator is essential for its reliable and efficient operation. Always lift the refrigerator grabbing it by the bottom. Never drag the refrigerator by its door or door handle. The manufacturer’s guarantee will not apply to door damage caused by its re-hinging. Any repairs caused by such circumstances will be performed at the cost of the owner. 4.1. VENTILATION
The compressor and condenser of the refrigerator heat up during operation, therefore sufficient ventilation should be provided for cooling.

• The refrigerator should be installed in a well-ventilated room with normal humidity. Never install the refrigerator in rooms with high humidity, e.g. in bathrooms or basements.
• Ensure that gaps of at least 3 to 5 cm on the sides and 10 cm above the top are provided during installation for free air circulation. Do not obstruct air movement at the back side of the appliance.
• Do not place the appliance near heat sources.
• Do not install the refrigerator so that it is exposed to direct sunlight or near heat sources (kitchen ovens, cookers, fireplaces, etc.).

4.2. LEVELING
It is important that the refrigerator is installed on a level surface for efficient operation. After placing the refrigerator at its permanent location adjust its position by turning the adjustable front feet. The refrigerator should not be slanted backwards by more than 5°.
4.3. CONNECTING TO POWER SUPPLY
The refrigerator complies with Class 1 requirements for protection against electric shock and is connected to the power supply grid by a two-pole plug with an earthing contact. Before connecting to power supply ensure that:

• the grid voltage corresponds to that indicated on the data plate located on the back side of the refrigerator;
• the earthing contact of the electric socket is connected to an earthing conductor of the mains cable (the earthing conductor should have a minimum rating of 10 A);
• the power socket and plug should be of the same type; if the plug does not fit the socket the latter should be replaced with one compatible with the plug (this work should be performed by a skilled electrician).

The refrigerator should be placed so that you would always have access to the power socket. A refrigerator improperly connected to power supply, i.e.
incompliant with the requirements for powerful home appliances set forth in this manual, is potentially dangerous. The manufacturer shall not be made liable for damage to human health and property if such damage is caused by nonobservance of the installation requirements specified herein.

OPERATING THE REFRIGERATOR

5.1. BEFORE TURNING ON
After installing the refrigerator please wait for approx. three hours before connecting it to power supply. This way you will allow the refrigerant to be properly distributed: this is necessary for proper operation of the refrigerator.
You will be able to place food in the refrigerator within a few hours after connecting it to power supply. Remove the transportation inserts between the compressor and the back wall of the niche, as well as all other inserts and adhesive tape preventing the movable parts of the appliance from displacement during transportation.
If the appliance is covered in a protective polymer film, carefully remove it, taking precautions not to damage the paint or polymer coatings in the components.
5.2. STARTING OPERATION

• When the refrigerator is connected to power supply the display backlight will light for two seconds.
• The compressor will start up.
• The SMART function will be activated and the corresponding indicator will light for a few seconds.
• When the display backlight goes out open the door or press any button; the backlight will come on again.
• Open the refrigerator door in 30 minutes. The temperature inside the cooling chamber should have dropped. This means that the refrigeration system is operating properly.
• Indicator is the pilot light of the frequency converter. If the power is on it will light when the compressor is operating.
• Any operations with buttons are only accessible when the buttons are unlocked and backlit on the display.
• You can select the operating mode of the refrigerator on the control panel located on the refrigerator door.

ATTENTION!
A temperature of +2 °С is comparatively low, while +8 °С is relatively high for a cooling chamber. Usually the temperature is set to +4 °С.

FUNCTIONAL FEATURES

TEMPERATURE SETTINGS

• Setting the temperature in the cooling chamber:
  to set the temperature press the «Zone» button to select the zone of the cooling chamber and hold it down until the indicator starts flashing. Then press the «Temperature» button to set the desired temperature. Each subsequent pressing of the button will change the temperature on the display.

After selecting the temperature press the ОК / button or wait for 5 second for setting confirmation. The temperature is now set.
Order of temperature selection with the button:
5 °С→ 6 °С→ 7 °С→ 8 °С→ OFF→ 2 °С→ 3 °С→ 4 °С→ 5 °С.
ATTENTION!
The OFF indicator means that the refrigerator is shut down. No cooling is active in the OFF state. By all means remove all food from the refrigerator before selecting this setting.

• Setting the temperature in the freezing chamber: to set the temperature press the «Zone» button to select the zone of the freezing chamber and hold it down until the indicator starts flashing.
  Then press the «Temperature» button to set the desired temperature. Each subsequent pressing of the button will change the temperature on the display.
  After selecting the temperature press the ОК / button or wait for 5 second
  for setting confirmation. The temperature is now set.
  Order of temperature selection with the button:
  -18 °С→ -17 °С→ -16 °С→ -24 °С→ -23 °С→ -22 °С→ -21 °С→ -20 °С →-19 °С→ -18 °С.

«FAST COOLING» MODE
After selecting the «Fast Cooling» mode the temperature in the cooling chamber will quickly drop to 2 °С. This allows food to be stored fresh without a loss of nutrients.
ATTENTION!
In the «Fast Cooling» mode the temperature in the cooling chamber is not adjustable.

• To activate the function press the «Functions» button on the control panel; the indicator will start flashing on the display. To confirm the selection press and hold the ОК / button for 5 seconds.
• In the fast cooling mode press and hold the «Functions» button until the indicator starts flashing on the display. Press the ОК / button to deactivate the function.

NOTE: the fast cooling function is automatically deactivated when the «Vacation» or SMART function is selected.
«KEEP FRESH» FUNCTION
When the refrigerator is on the «Keep Fresh» function will regularly start up and operate for 20 minutes.
The freshness retention system decomposes smells and microorganisms based on CO2 and H2O. At the same time it releases free radicals for active destruction of germs, creating a cleaner and safer cooling environment.

• Manual activation of the function:
  press the «Functions» button to select the «Keep Fresh» function, until the indicator starts flashing on the display; then press and hold the ОК / button for 5 seconds to confirm the selection. If the ОК / button is not pressed within 5 seconds the setting will be cancelled.

• De-activation of the function:
  the function will be automatically deactivated after 20 minutes of operation.

• Manual de-activation of the function:
  press the «Functions» button to select the «Keep Fresh» function, until the indicator starts flashing on the display; then press and hold the ОК / button to confirm de-activation.

FAST FREEZING FUNCTION
This function provides fast freezing of food.
When the fast freezing function is activated the temperature in the freezing chamber will be automatically set to -32 °С. After 26 hours of operation the fast freezing function will be automatically deactivated.
ATTENTION!
In the fast freezing mode the temperature in the freezing chamber is not adjustable.

• Activation of the function:
  press the «Functions» button to select the «Fast Freezing» function, until the indicator starts freezing on the display; then press and hold the ОК / button for 5 seconds to confirm the setting. If the ОК / button is not pressed within 5 seconds the setting will be cancelled.

• De-activation of the function:
  after 26 hours of operation the function will be automatically deactivated.
  If you wish to prematurely deactivate the fast freezing function, press the «Functions» button until the indicator starts flashing on the display; then press the ОК / button to confirm, this will deactivate the fast freezing function.

NOTE: when the SMART function is activated the fast freezing function will be automatically cancelled.
«VACATION» FUNCTION
We recommend using this function during a vacation or a prolonged business trip. It ensures economical power consumption. In this mode there will be no unpleasant odors in the cooling chamber and the temperature in the freezing chamber will be set to -14  С.
ATTENTION!
Before activating the «Vacation» function please remove all perishable foods from the cooling chamber; there is however no need to remove such foods from the freezing chamber. The temperature in the freezing chamber will not be affected in this mode.

• Activation of the function:
  press the «Functions» button to select the «Vacation» function, until the indicator starts flashing on the display; then press the ОК / button for 5 seconds for confirmation. If the ОК / button is not pressed within 5 seconds the setting will be cancelled.

• De-activation of the function:
  In the «Vacation» mode press the «Functions» button to select the «Vacation» function, until the indicator starts flashing on the display; then press the ОК / button for 5 seconds for confirmation. The «Vacation» function will be deactivated.

NOTE: when the SMART function is activated the “Vacation” function will be automatically cancelled.
“SMART” FUNCTION
When the «Smart» function is activated the temperature in the cooling chamber will be set to +4 °С and the temperature in the freezing chamber to -18 °С. In this way the food will be stored better and for a longer time, while the refrigerator operates more efficiently and a better performance is ensured.
ATTENTION!
In this mode the temperature in the cooling and freezing chambers is not adjustable.

• Activation of the function:
  press the «Functions» button to select the «Smart» function, until the indicator starts flashing on the display; then press the ОК / button for 5 seconds for confirmation. If the ОК / button is not pressed within 5 seconds the setting will be cancelled.

• De-activation of the function:
  In the «Smart» mode press the «Functions» button to select the «Vacation» function, until the indicator starts flashing on the display; then press the ОК / button for 5 seconds for confirmation. The «Smart» function will be deactivated.

NOTE: when the «Fast Freezing» or «Vacation» function is activated the «Smart» function will be automatically cancelled.
«CHILD LOCK» FUNCTION
The «Child Lock» function is applied to prevent improper operation of the appliance caused by an inadvertent cancellation of settings. When the lock function is activated the selected temperature settings and functions will not be changed by pressing the buttons on the control panel.

• Manual activation/deactivation of the function: Press and hold the ОК / button for 3 seconds, the indicator will light up on the display. After that you can turn the «Child Lock» function on or off.

OPEN DOOR ALARM FUNCTION
The open door alarm function will be activated if any of the refrigerator doors remains open for more than 3 minutes. Press any button to cancel the alarm. If the door stays open for the next 3 minutes the alarm will be activated again. The alarm signal will be emitted until the door is closed.
POWER FAILURE MEMORY FUNCTION
In case of a power failure the refrigerator will retain its operating settings when the power supply is restored.
STARTUP DELAY FUNCTION
In order to protect the compressor from damage in case of a short-term power failure (i.e. less than 5 minutes), the compressor will not be started immediately when the power supply is restored.
HIGH TEMPERATURE ALARM FUNCTION (only after power-off)
If, after startup of the refrigeration system, the temperature sensor reading in the freezing chamber exceeds -10 °С, the temperature reading of the freezing chamber will start flashing. The temperature in the freezing chamber will be displayed when any button is pressed; normal display will be restored when any button is pressed again or after 10 seconds.
ERROR INDICATION
If the symbols E0, E1, E2, EH or EC appear on the display, then the refrigerator is malfunctioning. In this case please refer to the error code table below.
DEFROSTING SYSTEM ACTIVATION («NO FROST» FUNCTION)
After unlocking the control panel press and hold the «Temperature» and «Functions» buttons for more than 3 seconds in order to activate the defrosting system. When the «FL» symbol appears on the display, press the «Zone» button to display the defrosting status. The defrosting system is operating by default, «1» is displayed. Press the «Temperature» button to turn the system off, the display will show «0».
USING THE WATER DISPENSER (FOR MODEL СТ-1749)The refrigerator is equipped with a water dispenser which facilitates the filling of water into a cup and provides a nearly instant access to cold water. The dispenser has one 2.5 liter water tank which has to be filled with water. Follow the instructions below to use the water dispenser:

1. Open the refrigerator door to ensure that the water dispenser tank is properly fastened.
2. Open the filling cap and slowly pour water into the tank to avoid any spills until the tank is full. Then close the filling cap of the water dispenser tank.
3. When the water tank is filled with water, set the thermostat to the lowest mode or the fast cooling mode; in an hour you will have cold water available for drinking.
4. When the water dispenser is used some water may drip and gather at the bottom of the dispenser. Please wipe the rundown water off with a cloth.
5. The level of water in the dispenser tank should be below the maximum level mark.

NOTE:

• do not take the cup away before the water stops dripping;
• wipe off the water that may gather in the collection tray, as well as any streaks of water remaining on the refrigerator door surface.

ATTENTION!
Wait for 24 hours after startup for the refrigerator to cool down enough to cool the water.
BEFORE FIRST USE

• Discard the first 6 full cups of water filled from the dispenser as the water may contain dust and have a strange smell.
• If you accidentally drop the water tank ensure that is does not leak water.
• Do not fill any other liquids, any beverages, e.g. juice, Cola, beer, etc. into the water dispenser tank.
• Do not fill hot water into the tank (the tank can only withstand temperatures up to 50 ⁰С).

MAINTENANCE AND CARE

When cleaning or maintaining the refrigerator, first turn off the power by removing the plug from the socket. Empty the chambers of food. Use neutral detergents. Never use abrasive detergents, alkaline products, organic acids and hot water as this may damage the paintwork. Do not use sharp or metal objects as this may damage the refrigerator.
The door seal gets dirty easily and needs to be washed more often.
If you do not use the refrigerator for a long time, remove the plug from the socket, defrost, wash and dry the refrigerator.

TROUBLESHOOTING TABLE

In case of improper operation or a malfunction, please study the following section before contacting an authorized service center. In some cases you may be able to solve the problem yourselves.

connected to the electric socket.
•The ambient temperature is too low. Try to set a lower (colder) temperature.
•It is normal for the freezing chamber not to work during automatic defrosting or for a short time after refrigerator startup to protect the compressor.
Unpleasant smell in the refrigerator| Cleaning is probably required. Smells may come from foods, containers, packaging, etc.
Noise in the refrigerator| The following noises are normal:
•noise of the operating compressor:
•air circulation noise caused by the small fan in the freezing chamber or by other refrigerator components;
•bubbling noise similar to that of boiling water.
•crackling noises during automatic defrosting;
•clicking noise before compressor startup.
Motor operates continuously| The noise of the operating motor is normal in the following cases:
•the temperature is set too low
•a large quantity of warm food has recently been placed in the refrigerator,
•ambient temperature too high;
•the door has been open for a long time or opened too often;
•first startup of the refrigerator or restart after a long break
Layer of frost inside the refrigerator| Ensure that the food does not impede air circulation. Check that the door is tightly closed.
Temperature in the refrigerator too high| The door has probably been left often, or something is preventing the door from closing, the refrigerator is installed too close to adjacent walls, electric appliances, etc.
Temperature in the refrigerator too low| Set a higher temperature on the control panel.
The door is hard to close| Check the installation gradient of the refrigerator. The front edge of the refrigerator should be higher than the back edge by max.10 to 15mm to provide sufficient gravity for door closing.
Internal illumination not working| •LEO lamp damaged. Replace the bulb.
•The light has been turned off by the control system since the door has been open for a long time. Close the door and open it again to re-activate the function.

ERROR CODE TABLE

malfunction
| Simultaneous «EO» and «El» errors
| Poor connection
| Ambient temperature sensor malfunction

ATTENTION!
This refrigerator contains a minor quantity of R600a grade refrigerant which is practically environmentally safe; however it is a flammable gas. In case of a leak it can cause eye irritation or ignite.

DI SPOSAL

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 10 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://centek.ru/servis. Service support contacts: Phone: +7 (988) 24-00-178, VK:
vk.com/centek_krd. General Service Center: OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42. The product has the Certificate of Conformity.

MANUFACTURER AND IMPORTER INFORMATION

Imported to EAEU b y: OOO «Larina-Elektroniks». Address: Russia, 350080 Krasnodar, ul. Demusa, 14. Phone: +7 (861) 2-600-900.
DEAR VALUED CONSUMER!
The warranty period is 36 months for the device and 60 months for the compressor from the date of sale to the end user. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS

1. The guarantee shall be valid if the following documentation conditions are observed:
   – The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
   The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.

2. The guarantee shall be valid if the following operation conditions are observed:
   – the appliance is used in strict accordance with the present manual;
   – the safety rules and requirements are observed.

3. The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.

4. The guarantee does not apply in the following cases:
   – mechanical damage;
   – normal wear of the appliance;
   – non-observance of operation requirements or erroneous actions on the part of the user;
   – improper installation or transportation;
   – natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
   – ingress of foreign objects, liquids or insects into the inside of the appliance;
   – repairs or modifications to the appliance by unauthorized persons;
   – use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
   – failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
   a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
   b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
   – for battery-powered appliances – operation with inappropriate or depleted batteries;
   – for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.

5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.

6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.

7. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.
Warranty certificate No
ATTENTION! Please ask the seller to fill out the warranty card and tear- off coupons in full. The ticket is valid in the presence of all stamps and marks.

Product
Model
Serial Number
Date and sale
These tear-off coupons are filled in by a representative of the seller
Product
Model
Serial Number
Date and sale
Vendor
Seller’s address
Full name and phone number of the buyer
These tear-off coupons are filled in by a representative of the service center
Type of Repair
Date of Receipt
Release Date

References

• Сервис - Официальный сайт Centek
• VK.com | VK
• Главная страница - Официальный сайт Centek
• Сервис - Официальный сайт Centek

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>