BRISTAN TAN BF BLK Tangram Bath Filler Instruction Manual
- June 13, 2024
- BRISTAN
Table of Contents
BRISTAN TAN BF BLK Tangram Bath Filler
Installation Instructions
& User Guide
Please leave these instructions with the end user
Tangram Bath Filler Range I TAN BF (D1)
Specifications
Pack Contents
Operation
Tools Required for Installation/ Maintenance
Prior to Instalation
- All products manufactured and supplied by Bristan are safe to use provided that they are installed, operated and receive regular maintenance in accordance with these instructions.
- This product needs to be installed in accordance with, and meet the requirements of The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and The Water Supply (Water Fittings) (Scotland) Byelaws 2014.
- For full Installation Requirements & Notes (IRN) please visit www.wrasapprovals.eo.uk/approvals-directory
- Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance.
- Before installing this product the water supply must be thoroughly flushed in order to remove any swarf, solder etc. Full access must be made available for future maintenance/servicing purposes.
- This product must not be modified in any way as this will invalidate the guarantee.
Spare Parts
To replace any spare parts for your tap, why not scan the QR Code or visit www.bristan.com and search for your product.
Important
- The images shown are for illustrative purposes only.
- The tap you have purchased may look different to those pictured in this booklet but will follow the same installation steps.
- Your contents page will be specific to your product.
- If you find your product or any of its components differ from those shown on the contents page, please contact our customer support.
Installation
-
Feed the tap body through the plinths and ensure rubber plinth seals are in place
Once aligned, feed the threaded tails through tap holes
Some plinths will need to be aligned with a pre-attached grub screw in the tap
Align the hole on the plinth with the exposed grub screw and ensure the rubber seal is correctly in place before attaching washer and backnut -
To secure the taps to the bath, use a box spanner to tighten the metal backnuts underneath ensuring the washer is correctly positioned in between the backnuts and the bath
-
Connect the hot and cold water supplies to the threaded tails
General Cleaning
- Bristan products are made from premium materials, with hand polished, electroplated, PVD or EPD finishes.
- Your taps or shower should be regularly cleaned with warm water, a mild pH-neutral liquid soap, and polished with a soft cloth. Any residues from soap, toothpaste, shampoos and shower gels can cause blemishes if not rinsed off straight after use.
- Household bleaches and cleaners contain harsh chemicals and may damage the surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar.
Maintenance – Cartridge Valve Replacement
-
Remove indice by pulling it loose, then undo hex grub screw to remove handle
lndice will be placed on either the front or back of the handle -
Remove the shroud, screw and spline adapter if your model has them
(When replacing, ensure valve is fully closed with the handle parallel to the spout) -
Unscrew the cartridge/ valve using a box spanner Check any seals and O-rings for damage.
Replace cartridge/ valve if necessary -
Reverse the steps to replace the cartridges/ valves and handles
Clean Replace Outlet
-
Housed Outlet
Using an adjustable spanner, unscrew gently to remove the outlet
Recessed Outlet
If provided, insert the key tool into the outlet and twist to release it
Coin Slot Outlet
Using a coin, insert into the slot on the outlet and twist to release it -
Check all loose parts for any damage, then soak using a suitable solution to de-scale
-
Reverse the steps to replace the outlet
Love Your Chrome
Bristan offers an effective chrome-friendly cleaning kit for use with your taps and showers. Scan the QR Code or search for ‘CLEAN KIT0l’ on www.bristan.com.
Troubleshooting
Notes
Please use this space for any notes you or your installer may have
regarding the installation/plumbing of this product.
Contact Us
Bristan Group Ltd.
UK: Bristan Group, B78 lSG.
EU: Masco Europe S.a.r.l. 14 Rue Strachen
6933 Mensdorf Luxembourg
Customer Service: +44330 026 6273 Web: www.bristan.com
Email: enquire@bristan.com
A Masco Company
Our Guarantee
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind.
To start your free guarantee simply scan the QR code and register your
product.
Alternatively visit
www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where
our expert team of advisors will be able to offer you any help and advice.
For full guarantee terms and conditions visit www.bristan.com/service-
centre/guarantees.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>