Pyle PMX44T Professional Wireless DJ Audio Mixer User Manual

Pyle PMX44T Professional Wireless DJ Audio Mixer

For the best results and the satisfaction from your new unit, please read this manual thoroughly, and retain it for future reference.

OPERATION AND MAINTENANCE

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise.
• In order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components. Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day).
• Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic changes in ambient temperature when the device is moved from one location to another, or air conditioner is turned on or off. For example, using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the power until the condensation has completely dried out.
• Avoid setting all controls to their maximum. Depending on the condition of the connected devices, doing so may cause feedback and may damage the speakers.
• When turning on the power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage. When turning the power off, the power amplifier should be turned off FIRST for the same reason.

PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS

When connecting the USB2.0 connector to computer, please must abide by following points. If not, it may cause computer crash, breakdown, or losing data. If the computer or mixer crash, please restart the application software or computer operating system, or disconnect the mixer, then power on again.

• Use an USB cable. USB 3.0 cable cannot be used.
• Before connecting the computer to the USB 2.0 terminal, exit from any power- saving mode of the computer (such as suspend, sleep, standby).

FUNCTION AND INTRODUCTION

1. [MIC/LINE] Mono input, connect the microphone, musical instrument or audio device (CD player and so on) to the device. The sockets are supporting both XLR and UNBALANCED 1/4″PLUG.
2. [+48V PHANTOM] Button/LED, when the button is turned on, the LED light is on, provide DC+48V phantom power to XLR plug on MIC mono input. Please turn on this button when using the condenser microphone which is powered by a phantom power.
3. [GAIN] Controller, determines the basic volume of each channel, adjust them for the maximum volume performance, when the volume gets too loud, the [PEAK] LED indicator light will keep flashing.
4. [HIGH] Treble tone controller, adjust the controller to enhance or attenuate for 15dB at 12 KHz .
5. [LOW] Bass tone controller, adjust the controller to enhance or attenuate for 15dB at 80Hz.
6. [FX] Controller, adjust the signal level from the channel to the reverberation line. Please note, the single level will vary with the different setting of the channel attenuator. If using the stereo channel, will mix the signals from L and R channels, then, send it to reverberation line.
7. [LEVEL] Controller, adjust to balance the volume of each channels.
8. Stereo channel input, if only connect to L/(MONO) socket, the mixer will send out the same mono signal to L and R outputs.
9. [MAIN] Output, connect the active speaker or amplifier.
10. [POWER] Power control switch.
11. Converting switch for “stereo channel” and “USB signal”.
12. [TAPE/CD ] TAPE/CD signal input.
13. [UNBAL5/6] Stereo input.
14. [PHONES] Connect an 3.5mm earphone, the socket is supporting stereo phone plug.
15. [DSP Select] Press UP or DOWN button to select from 16 DSP.
16. [PEAK] LED indicator light, when the volume of input signal or volume after adjusting equalizer is too High, the LED indicator light will keep flashing, please rotate the [GAIN] CONTROLLER counterclockwise to turn down the volume.
17. [Output Level Indicator] This is a stereo signal level indicator configured with green LED lights (SIG) at the bottom and red LED lights (Peak)at the top for both the left channel side and the right channel side. Flashing green LED lights indicate normal input signals. When the red LED lights are flashing, the MAIN output signal level may need to be lowered by adjusting the monitor output level control knob.
18. [PARAMETER] Control the parameter of the sound effect.
19. [FX LEVEL] Effects return to level controller, adjust the volume of effect.
20. [PHONES LEVEL] Earphone controller, adjust the volume of earphone.
21. [MAIN LEVEL] Fader, adjust the overall volume from [MAIN] output signal.
22. [DELAY] Controller, adjust the depth of the reverberation.
23. [USB LEVEL] Controller, adjust the volume of USB channel.
24. [PAN Control] The PAN control determines the position of the channel signal within the stereo image. When working with subgroups,you can use the PAN control to assign the signal to just one output, which gives you additional flexibility in recording situations.
25. [CHANNEL FADER] Adjusts the level of the channal signal. Use these faders to adjust the balance between the various channels.

MP3 OPERATING INSTRUCTIONS

1. WIRELESS BT CONNECTION
   • Press the “MODE ” button in order to select the Wireless BT mode, after the success of the selection, the Wireless BT icon on display is flashing, and display BT.
   • Open the Wireless BT for pairing, after the success of the pairing, there will be a sound prompt.
2. BUTTON FUNCTION
   • “ ” button, press first time to pause the playing song, press again to continue playing.
   • ” ” button, short press to play the previous song, long press to reduce the input volume.
   • ” ” button, short press to play the next song, long press to increase the input volume.
   • [MODE] Selecting button, switching the functional model, select USB, REC, BT in order.
3. USB RECORDING OPERATION
   • Press the “MODE” key to select the REC state.
   • Press the “ ” button to start recording, the LED screen shows the recording time, Press the “ ” button again to pause the recording.
   • Press the “ MODE ” key back out the recording.
4. COMPUTER SOUND CARD
   When connect the computer data cable, it will enter the PC playing states automatically (The computer will install the driver automatically at the first connection, need to wait until the installation finish, to play or record)

USB FOR DATA TRANSFER, RECORD AND POWER SUPPLY

USB FOR POWER SUPPLY ONLY

Connected with PC USB port, Power bank or power socket to supply power to mixer.

It must meet the following requirements:

• Output voltage: 4. 8V to 5. 2V Output current: 1A or even more

DIGITAL EFFECTS

SPECIFICATIONS

Features

• Six-Channel Audio Mixer with Built-in USB Interface
• Combines Traditional Sound Card and Mixer Function
• Built-in Wireless BT for Music Streaming
• Built-in MP3 Player with LED Display
• Built-in DSP Sound Effects Processor
• Connects USB to PC to Play & Record Music
• Connects USB to PC or Power Bank for Power Supply
• Convenience for Mobile Audio Connection & Outdoor Guitar while Playing & Singing
• Exquisite Plastic Chassis
• Mic/Stereo/MP3/USB Sound Card/Wireless BT Input Channels
• Main/Phones Output Channels
• Ultra-Low Noise Design with High Headroom
• Clipping LED Indicators for Left and Right Channel
• Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
• 1 XLR / 1/4” Jack Combo Mic Input
• 2 RCA Stereo Inputs

What’s in the Box

• (1) Mixer Console
• (1) Power Adapter

Technical Specs

• Power Output: +15V/0.3A -15V/0.2A +48V/0.05A
• Power Supply: 120-240V, (DC 5V/1A Power Adapter)
• Power Consumption: 5W
• Construction Material: Engineered ABS
• Phantom Power Voltage: +48V
• Frequency Response: 20Hz-20KHz
• Total Harmonic Distortion: <0.5%@+4dBu
• Product Dimension (L x W x H): 7.68” x 7.09” x 2.4” -inches

Questions? Issues?

We are here to help!

• Phone: (1) 718-535-1800
• Email: support@pyleusa.com

www.PyleUSA.com

FREQUENTLY ASKED QUESTIONS

What is the Pyle PMX44T Professional Wireless DJ Audio Mixer used for?

The PMX44T is designed for DJs and audio professionals to mix and control audio from multiple sources.

Does the PMX44T support wireless connectivity?

Yes, the PMX44T includes wireless Bluetooth connectivity for streaming audio from compatible devices.

How many channels does the PMX44T have?

The PMX44T features a total of four channels for connecting various audio sources.

Can I connect turntables to this mixer?

Yes, the PMX44T typically includes phono inputs suitable for connecting turntables.

What is the frequency response of the PMX44T?

The frequency response may vary, but it's typically in the range of 20Hz to 20kHz.

Is it rack-mountable?

Yes, the PMX44T is rack-mountable for easy integration into your setup.

Does it have built-in effects and EQ controls?

Yes, it usually includes built-in effects and EQ controls to shape and enhance your audio.

Can I connect microphones to this mixer?

Yes, you can connect microphones to the PMX44T, typically with XLR or 1/4-inch inputs.

Is phantom power available for condenser microphones?

The PMX44T may provide phantom power for condenser microphones, but you should check the specifications to be sure.

How do I connect external audio devices like smartphones or laptops?

You can connect external devices via the mixer's line inputs or via Bluetooth for wireless streaming.

Does it have a headphone output for monitoring?

Yes, the PMX44T typically includes a headphone output for monitoring your mix.

Can I record my mix using this mixer?

You can often use the mixer's output to connect to a recording device for capturing your mix.

Is a power supply included with the mixer?

A power supply is usually included with the PMX44T for powering the unit.

Is this mixer compatible with DJ software?

The PMX44T can be used with DJ software on your computer, typically via USB connections.

What is the maximum input level supported by the mixer?

The maximum input level may vary, but it's typically around +10dB.

DOWNLOAD THE PDF LINK:Pyle PMX44T Professional Wireless DJ Audio Mixer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>