LA CROSSE TECHNOLOGY 513-1416 Atomic Digital Wall Clock User Manual

: June 13, 2024
: LA CROSSE TECHNOLOGY

Table of Contents

Power Up
Settings Menu
Atomic Time
Custom Display
Time Alarm
Temperature Trend Arrows
Specifications
Warranty & Patents
Care & Maintenance
Documents / Resources

Atomic Digital Clock
with Indoor Temp. and CalendarSET UP GUIDE
MODEL: 513-1416

Power Up

Insert 2-AA batteries into your Atomic Clock
Set Time and Date.

Atomic Digital Clock
513-1416

Hold the SET button until the display changes, to enter the Settings Menu.
Press and release the +/- buttons to adjust values. Hold to adjust quickly.
Press and release the SET button to confirm values and move to the next setting.
Press and release the SNOOZE button at any time to save and exit.

Settings Menu Order:

Language
Beep Sound
Atomic Time Signal
Daylight Saving Time
Time Zone
Hour
Minutes
Year
Month
Date
Fahrenheit/Celsius

Language: Whichever language is selected, the following instructions as well as your weekday and month abbreviation will be presented in that language.
ENG – English
ESP – Spanish
FRA – French
DEU – German
Atomic OFF: When Atomic OFF is selected, you will skip DST and Time Zone and move directly to the Hour setting. This will stop all Atomic Time searches and require manual time adjustments.
Daylight Saving Time:
On – DST on all year
Off – Standard time all year.
Automatic -Changes spring and fall
Time Zones:
ATL – Atlantic
EST – Eastern
CST – Central
MST – Mountain
PST – Pacific
ALA – Alaska
HAW – Hawaii
Weekday: Will set automatically when your Year, Month, and Date are set.

Atomic Time

The clock will automatically search for the Atomic Time Signal when powered up and at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
The Atomic Time Signal Icon will flash while searching and be solid when it has connected.
From the normal time display, press and release the SET button to manually start or stop a search for the atomic time signal. For information about Atomic Time (WWVB) visit: bit.ly/atomic_time.

Custom Display

Press and release the + (PLUS) button to have the Seconds show or not show on the clock.

|
---|---
Seconds displayed| Seconds not displayed

Time Alarm

Set Alarm:

Hold the ALARM button to enter the Alarm Settings. ALARM ON will be selected.
Press and release the +/- buttons to adjust flashing values. Hold to adjust quickly.
Press the ALARM button to confirm and move to the next item.
Press and release the SNOOZE button at any time to save and exit.

Silence a Sounding Alarm:
Press any button except SNOOZE to silence the alarm for 24 hours.
Activate/Deactivate Alarm:

The alarm is active when set. Press and release the ALARM button to activate or deactivate the alarm. Alarm Time will show briefly.
The Alarm Icon will show when alarm is active.

Snooze:

When the alarm sounds, press the SNOOZE button to silence the alarm for 10 minutes. Zz will flash.

Note: The alarm will sound with increasing frequency for two minutes, then shut off automatically if not silenced. It will sound again at the same time in 24 hours.

Temperature Trend Arrows

The Temperature Trend Arrows indicate change in temperature ( 2ºF /1ºC) in the past hour. These Indicators update every 15 minutes. Indoor Temperature may not change often.
UP ARROW: Temperature has risen in the past hour.
RIGHT ARROW: Temperture is unchanged in the past hour.
DOWN ARROW: Temperature has fallen in the past hour.

Low Battery Icon

Low Battery Icon by Time, replace batteries in the Clock.

Specifications

Atomic Clock (513-1416)

Time Digits: 4 inches (10.16 cm) High
Time Zones: Seven
Alarm: (70db) Snooze: (10 minutes)
Temperature Range: 32ºF to 122ºF (0ºC to 50ºC)
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 12 months
Dimensions: 10.0” L x 1.02” W x 6.50” H (25.4cm L x 2.60cm W x 16.50cm H)

We’re Here to Help
If you require additional assistance, get in touch with our friendly customer support team based in La Crosse, WI.
Self Help:bit.ly/513-1416_support
Online:bit.ly/contact_techsupport
Phone: 1.608.782.1610
Our knowledgable customer support team is available: Mon-Fri 8am-6pm CST
SCAN HERE Additional Info and Support

https://bit.ly/513-1416_support

Stay in Touch!
Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.

Warranty & Patents

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents
CA WARNING:
This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.gov

Care & Maintenance

When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

Do not mix Alkaline, Lithium, Standard, or Rechargeable battteries.
Always purchase the correct size and grade of battery most suitable for the intended use.
Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed correctly with regard to polarity (+ and -).
Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
Remove used batteries promptly.
For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone directory for local recycling centers and/or follow local government regulations.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment.

Designed in La Crosse, Wisconsin
Made in China
Printed in China
DC 051723

Documents / Resources

| LA CROSSE TECHNOLOGY 513-1416 Atomic Digital Wall Clock [pdf] User Manual
513-1416 Atomic Digital Wall Clock, 513-1416, Atomic Digital Wall Clock, Digital Wall Clock, Wall Clock, Clock
---|---