CENTEK CT-1626 Meat Grinder Instruction Manual

: June 13, 2024
: CENTEK

Table of Contents

Product Overview
SAFETY PRECAUTIONS
APPLIANCE DESCRIPTION
SCOPE OF SUPPLY
OPERATING PROCEDURE PREPARATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CENTEK CT-1626 Meat Grinder Instruction Manual

Product Overview

Dear Customer, Thank You for purchasing a CENTEK brand product. We guarantee flawless function of this item, provided the guidelines of its operation are observed.

The meat grinder is a household appliance and is not intended for industrial use! PURPOSE OF THE APPLIANCE: for making minced meat and fine chopping of other foods.

SAFETY PRECAUTIONS

The appliance purchased by You complies with all safety standards applicable to electric appliances in the Russian Federation. The following requirements should be strictly observed in order to avoid situations hazardous for human life and health, as well as premature failures of the appliance:

Carefully read the present manual prior to operating the appliance.
Retain the present manual.
Ensure that the power supply grid voltage corresponds to the one indicated on the appliance before operating it.
Do not use accessories and spare parts other than supplied by the Manufacturer. If such parts are used the Manufacturer’s warranty will become void.
Do not operate the appliance if its power cable, plug and other parts are damaged.
In case of power cable damage it should be replaced, to avoid dangerous situations, by the Manufacturer, a service centre or similar skilled personnel.
Before starting operation thoroughly clean the parts of the appliance that may contact with food.
After use immediately disconnect the appliance from the electric socket.
Do not leave the operating meat grinder unattended.
Disconnect the appliance from power supply before removal or installation of any accessories.
Wait until the moving parts of the appliance com to a complete stop before removal of any parts.
Never submerge the appliance in water or other liquids, do not wash it under a tap! Use only damp cloth for cleaning.
Do not try to grind bones, nuts and other hard objects.
Do not reach with your fingers inside the grinder head. Use only the pusher supplied with the grinder.
Do not operate the appliance continuously for more than 10 minutes.
A user manual with safety instructions is included with the accessories.
Use the appliance only for its intended purpose to avoid emergencies.
The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to let children play with the appliance.
If the grinder is blocked, press the «РЕВЕРС» (REVERSE) button. The grinder head will be freed from meat due to backwards rotation, after which normal operation can be restarted.
Special instructions for transportation (shipment) and sale: none.
Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

ATTENTION! This appliance is equipped with a thermostat which automatically turn the appliance off in case of overheating. If the appliance suddenly stops operating:

Pull the plug from the electric socket.
Turn the appliance off by pressing the ON/OFF button.
Let the appliance cool down for 1 hour.
Connect the power cable to the electric socket.
Turn the appliance on again. If the thermostat trips too often, apply to the Vendor or an authorized service centre.

APPLIANCE DESCRIPTION

Loading tray
Lock button
«ВКЛ/ВЫКЛ» (ON/OFF) and «РЕВЕРС» (REVERSE) button
Sausage nozzle
Kebbe nozzle
Head nozzle
Motor unit
Pusher
Knife
Cap nut
Auger
Disk 5mm
Disk 7mm
Shredder Pusher
Shredder housing
Slicer attachment
Large grater
Fine grater
Juicer

SCOPE OF SUPPLY

Electric meat grinder – 1 pc.
Grinder head – 1 pc.
Auger – 1 pc.
Pusher – 1 pc.
Blade – 1 pc.
Grinder plate – 2 pcs.
Ring nut – 1 pc.
Hopper – 1 pc.
Sausage attachment – 1 pc.
Kibbeh attachment – 1 pc. (2 parts)
Operating Manual – 1 pc.
Shredder pusher – 1 pc.
Shredder housing – 1 pc.
Chopper nozzle – 3 pcs.
Juicer, complete – 1 pc.

OPERATING PROCEDURE PREPARATION

Ensure that the appliance is turned off before connecting it to power supply.
Before grinding meat ensure that all bones and excessive fat has been removed.
Do not attempt to grind hard or fibrous foods (like ginger or horseradish).
If a hard piece of food causes the auger to stop, immediately turn the unit off and use the reverse function.

ASSEMBLY

Press the latch button, take the grinder head by the intake tube and align it with the motor coupling on the grinder body, taking care that the intake tube is slanted in the direction of the arrow on the top of the grinder body, then rotate the head counterclockwise until it is securely locked.
Insert the auger into the head, long axle first, and rotate it slightly until it engages with the motor shaft.
Put the blade on the auger axle with the cutting edges facing you. If the blade is not install correctly the meat will not be cut.
Install the desired grinder plate in front of the blade, aligning it with the lugs on the grinder head.
Holding the plate from falling off with one hand, set and tighten the ring nut with the other hand. Avoid overtightening the nut.
Install the hopper on the grinder head and seat it firmly in the operating position.
Place the appliance on a stable surface.
Do not obstruct the free flow of air at the bottom and sides of the motor unit. Avoid blocking the ventilation holes on the bottom and side of the motor unit.

SLICER

Press the lock button, take the chopper housing by the receiving tube and connect it to the connector, make sure that the tube is tilted in the direction of the arrow on the top of the housing, then turn the housing counterclockwise until it is securely fixed.
Choose the blade you want. (Large, small shredding blade or slicer)Put the products in a plastic tube.
Turn on, push the products through with a pusher.

JUICER

Assemble the juicer according to Figure 1.
Insert the juicer into the appliance as shown in Figure 2.
Install the food tray and place two cups under the outlet for the cake and juice.
When everything is ready, press the «ON» button, the auger will start rotating. Use the pusher to slowly push the product out of the tray into
the juicing cylinder. This way you will get fresh juice.
NOTE: The juicer is only suitable for making juice from soft fruits and vegetables, such as tomatoes. Before cooking, cut the products into small pieces for processing in a juicer.

MAINTENANCE

```
*       * The meat trapped inside the auger can be driven out by grinding a piece of bread.
```
- Before cleaning turn the appliance off and disconnect it from power supply.
- Press the latch and remove the grinder head. Remove the pusher and hopper.
- Unscrew the ring nut and take all parts out of the grinder head. Do not place grinder parts in a dishwasher!
- Wash all parts contacting with meat in hot water with soap. Clean the grinder immediately after use.
- Rinse the parts in clean cold water and let them dry.
- It is recommended to lubricate the blade and grinder plates with a small quantity of vegetable oil.
  SPECIFICATIONS
- Rated voltage: 220-240 V ~50/60 Hz
- Nominal power rating: 300 W
- Max. power rating: 2000 W
- Output capacity: 2 kg/min

DISPOSAL OF THE APPLIANCE

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://centek.ru/servis. Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina- Servis», Krasnodar, Phone: +7 (861) 991-05-42. The product is provided with the Certificate of Conformity No. № ЕАЭС RU С-CN.НА16.В.01142/22 of 29.12.2022.

MANUFACTURER AND IMPORTER INFORMATION

I mported to EAEU by: OOO «Larina-El ektroniks». Address: Russia, 350080 Krasnodar, ul . Demusa, 14. Phone: +7 (861) 2-600-900. DEAR VALUED CONSUMER! The guarantee period for al l appl iances amounts to 12 months since the date of sal e to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appl iance and undertakes to repair, freeof charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

The guarantee shal l be val id if the fol l owing documentation conditions are observed:
The original Warranty Card shal l be fil l ed out correctl y and cl earl y, indicating the of appl iance model , serial number and sal e date, the stamp of thesel l ercompany and signature of its representative shall be avail abl e, as wel l as the stamps on each coupon and the buyer’s signature in the Warranty Card. The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.
The guarantee shall be valid if the following operation conditions are observed:
- the appliance is used in strict accordance with the present manual;
- the safety rules and requirements are observed.
The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.
- The guarantee does not apply in the following cases:
- mechanical damage;
- normal wear of the appliance;
- non-observance of operation requirements or erroneous actions on the part of the user;
- improper installation or transportation;
- natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
- ingress of foreign objects, liquids or insects into the inside of the appliance;
- repairs or modifications to the appliance by unauthorized persons; use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
- failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance: a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
- for battery-powered appliances – operation with inappropriate or depleted batteries;
- for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.
- The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.
- The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.
- Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).