SoundCore Life Dot 2 True-Wireless Earbuds A3922 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Life Dot 2 True-Wireless Earbuds A3922
USER MANUAL
Charging
- Open or close the charging case to activate the LED battery indicator.
- Fully charge both the earbuds and the charging case before the first use.
- To prevent damage, use the provided USB-C cable.
- Fully dry off the earbuds and the USB port before charging.
LED indicator
| Flashing red | Low battery |
|---|---|
| Steady white | Being charged |
| Light off | Fully charged |
Powering On/Off
The earbuds will automatically power on when taken out of the charging case and power off when placed back into the charging case.
- To manually power on, press and hold the multi-function button on both earbuds for 1 second until the LED indicator turns white for 1 second.
- To manually power off, press and hold the multi-function button on either earbud for 8 seconds until the LED indicator turns red for 1 second.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken
out of the charging case.
LED indicator (Earbuds)
| Slowly flashing white | TWS connecting |
|---|---|
| Rapidly flashing white (Primary earbud) | TWS connected |
Slowly flashing white (Secondary earbud)
- The right earbud is the primary earbud by default. In TWS mode, place either one of the earbuds into the charging case, the other one will switch to be the primary earbud.
- When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
Bluetooth Pairing with your Device
1. Take the earbuds out of the charging case or manually power on the
earbuds, the earbuds enter the Bluetooth pairing mode successfully when the
LED indicator on either earbud flashes white.
2. Turn on Bluetooth on your device and click “Soundcore Life Dot 2”. The LED
indicator on either earbud will turn white for 1 second when Bluetooth
connected.
LED indicator (Earbuds)
| Rapidly flashing white | Bluetooth pairing |
|---|---|
| Steady white for 1 second | Bluetooth connected |
- When earbuds are out of the charging case and powered off, to manually enter Bluetooth pairing mode, press and hold the multi-function button on both earbuds for 3 seconds.
- Each time you power on your Soundcore earphones, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
Wearing
1. Choose the EarTips and EarWings that fit your ears best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and find the most comfortable position.
Button Controls
MUSIC
Play / Pause| Press once (L or R)
Next track| Press and hold for 1 second (R)
Previous track| Press and hold for 1 second (L)
Volume up / down| Control volume via the connected device
CALL
Answer / End a call| Press once (L or R)
Put the current call on hold and answer an incoming call
Reject a call| Press and hold for 1 second (L or R)
Transfer a call between earphones and mobile phone
Switch between held call and active call
MICROPHONE
Activate Siri or other voice assistant software| Press twice (L or R)
Mono mode
| Play / Pause | Press once (L or R) |
|---|
Answer / End a call
Reject a call| Press and hold for 1 second (L or R)
Activate Siri or other voice assistant software
Reset
1. Place the earbuds into the charging case and make sure they are being
charged.
2. Press and hold the button on both earbuds for 8 seconds until the LED
indicators on earbuds flash red for 3 times.
All the memory data will be cleared.
Specifications
Specifications are subject to change without notice.
| Input | 5V 2.5A |
|---|---|
| Rated output power | 5 mW (@1% THD) |
| Battery capacity | 85 mA x 2 (earbuds); 2600 mA (charging case) |
| Charging time | 1.5 hours |
| Playtime (varies by volume level and content) | 8 hours (Total 100 hours with |
the charging case)
Driver size| 8 mm x 2
Frequency response| 20 Hz – 20 kHz
Impedance| 16 Ω
Waterproof level| IPX5
Bluetooth version| V 5.0
Bluetooth range| 10 m / 33 ft
Support Videos
How to Clean Your Headphones
DOWNLOAD
SoundCore Life Dot 2 True-Wireless Earbuds A3922 User Manual – [Download PDF]
SoundCore Life Dot 2 True-Wireless Earbuds A3922 Quick Start Guide – [Download PDF]
A3922 Life Dot 2 DOC – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>