JBL VTX V25-II Professional Loudspeakers Owner’s Manual
- June 13, 2024
- JBL
Table of Contents
JBL VTX V25-II Professional Loudspeakers
Product Information
The VTX V25-II is a professional audio system that consists of various spare parts for replacement and maintenance. The product includes transducers, rigging components, and other accessories.
Transducers
| Part Number | Type | Description |
|---|---|---|
| 446213-001X | HF Driver Diaphragm Kit | D2430K, dual diaphragm, dual 3 in |
diameter voice coil, 32 ohms, complete driver Replacement diaphragms for the
D2430K compression
driver
339111-001X| MF Woofer| 2169H, 8 in diameter, dual 3 in diameter voice coil, 8
ohms, M complete woofer
445460-001X| LF Woofer| 2267H, 15 in diameter, dual 4 in voice coil, 8 ohms,
complete woofer
C8R2267| Recone Kit| Recone kit for the 2267H woofer
PART NUMBER| TYPE| DESCRIPTION
---|---|---
446213-001X| HF Driver| D2430K, dual diaphragm, dual 3 in diameter voice coil,
32 ohms, complete driver
D32RD2430| Diaphragm Kit| Replacement diaphragms for the D2430K compression
driver
339111-001X| MF Woofer| 2169H, 8 in diameter, dual 3 in diameter voice coil, 8
ohms, complete woofer
445460-001X| LF Woofer| 2267H, 15 in diameter, dual 4 in voice coil, 8 ohms,
complete woofer
C8R2267| Recone Kit| Recone kit for the 2267H woofer
Rigging
| Part Number | Type | Description |
|---|---|---|
| 5018087 | Rigging Frame | Suspension frame, no hinge bars or hardware, left side |
| 5018088 | Rigging Frame | Suspension frame, no hinge bars or hardware, right |
side
445713-001| Hinge Bar| Front rigging hinge bar
445238-001| Hinge Bar| Rear rigging hinge bar
5028168| Quick Release Pin| 3/8 in diameter, 38 mm long, includes 152 mm (6
in) lanyard and base
Other Accessories
| Part Number | Type | Description |
|---|---|---|
| 445416-001 | Grille | Grille, does not include JBL logo, left or right |
| 446375-001 | Logo | JBL logo, 50 mm x 40 mm |
| 5055535 | Input Panel | Input panel assembly, includes product label |
| 5132400-00 | Handle | VTX Series handle, includes handle cup and bar |
Product Usage Instructions
To use the VTX V25-II spare parts, follow the instructions below:
Transducers Replacement:
- Identify the faulty transducer that needs replacement.
- Refer to the part number and description in the table above to ensure you have the correct spare part.
- Follow the assembly drawings and torque values in the VTX V25-II SBOM (Service Bill of Materials) for proper installation.
- For HF Driver Diaphragm Kit and Recone Kit, carefully replace the existing components with the new ones.
- For MF Woofer and LF Woofer, remove the old woofer and install the new one, ensuring proper alignment and connection of the voice coils.
Rigging Setup:
- Choose the appropriate rigging frame and hinge bars based on your mounting requirements.
- Attach the rigging frame to the speaker enclosure securely using the provided hardware.
- If required, install the front and rear rigging hinge bars to enable suspension and rigging of the speaker system.
- For quick release and easy handling, use the provided quick release pin to secure the rigging components.
Other Accessories:
- If you need to replace the grille, ensure you have the correct side (left or right) and attach it securely to the speaker enclosure.
- For branding purposes, attach the JBL logo to the designated area on the grille.
- To connect audio sources, use the input panel assembly and follow the product label for proper connections.
- If necessary, install the VTX Series handle for convenient transportation of the speaker system.
INTRODUCTION
This document is a quick reference guide for the most commonly needed VTX
V25-II spare parts. For the complete list of parts, assembly drawings, and
torque values, refer to the VTX V25-II SBOM (Service Bill of Materials),
available for download from the JBL Professional Service Portal.
© 2023 Harman International Industries, Incorporated | 8500 Balboa Blvd.
Northridge, CA 91329 USA | www.jblpro.com | Version:
A