PYLE PLATV85BT Marine ATV Powered Speakers User Guide

June 13, 2024
Pyle

PyleAudio.com INSTALLATION INSTRUCTIONS FOR
PLATVG65BT
PLATVS5BT

PLATV85BT Marine ATV Powered Speakers

  1. Claretta Lighter
  2. DVi2V
  3. Ribbon
  4. RGB Remote Controller

REMOTE CONTROL FEATURES

  1. Turn On / Standby: Press this key to turn on LEDs or switch to standby mode.
    2 / 9. Dynamic Mode button: Switch from dynamic mode to color mode or switch between dynamic modes.
    3 / 8. Dynamic Mode Speed button: Use these buttons to adjust dynamic mode speed. If the unit is in static mode, pressing these buttons will switch unit to dynamic mode.
    4 / 5. Static Color Adjust button: Use this button to swithc between static colors. Pressing these keys while in dynamic mode will switch the unit to static mode.
    6 / 7. Brightness Adjust button: Pressing these buttons will adjust brightness whihle in static mode. If these buttons are pressed while unit is in dynamic mode, it will switch to static mode.
    10. Demo Mode button: this button will switch the unit into demo mode. While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.
  • Bluetooth Name:PLATV65BT Bluetooth Password:0000
  • Bluetooth Name:PLATV85BT Bluetooth Password:0000
  • Please remember to remove plastic insulator from remote unit battery compartment.
  • This remote uses a 3 volt CR2025 type battery. When replacing be sure to use only the same type of battery
  • The remote signal can pass though most obstacles.
  • Do not install unit in areas surrounded by metal as the remote signal will not reach the unit.

Product Technical Parameters

MARINE SPEAKER MODEL PLATVGSBT
– Bluetooth® -enabled all-terrain sound system 65″
– Long Excursion Woofer
– 1.0″Titanium Dome Tweeter
– Heavy Duty ABS Construction
– Quick Connect Speaker Terminals
– Bluetooth:DC12V5A/2x15W-RMS
– Fully Marinized
– Compatible with audio output of iPod /iPhone .
– Plug and Play For Easy Installation
– Heavy Duty Straps for any Mounting Position
MARINE SPEAKER MODEL PLATV85BT
--- ---
– Bluetooth° -enabled all-terrain sound system 8″
– Long Excursion Woofer
– 1.0″Titanium Dome Tweeter
– Heavy Duty ABS Construction
– Quick Connect Speaker Terminals
– Bluetooth:DC12V5A/2x30W-RMS
– Fully Marinized
– Compatible with audio output of iPod /iPhone .
– Plug and Play For Easy Installation
– Heavy Duty Straps for any Mounting Position
--- ---

 Made for
iPhone|  Made for
iPad|  Made for
iPod

For more detailed information visit us at:
PyleAudio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals