Peerless-AV KOP55XHB-A Mounts Kiosks User Manual
- June 13, 2024
- Peerless-AV
Table of Contents
KOP55XHB-A,
KOP55XHB-SA
**** 2022-10-17 #:150-9148-3 (2023-06-16)
KOP55XHB-A Mounts Kiosks
WARNING
Before installing make sure the supporting surface will support the combined
load of the equipment and hardware. Screws must be tightly secured. Do not
overtighten screws or damage can occur and product may fail. Never exceed the
Maximum Load Capacity. Always use an assistant or mechanical lifting equipment
to safely lift and position equipment. Although this product features a
corrosion-resistant coating, it is not designed to withstand wind. In windy
conditions, this product may fail, resulting in serious personal injury or
death. For installations exposed to wind, contact customer care to select one
of our wind-rated products. Be sure power cord is routed so that it will not
be tripped on, stepped on, or pinched by heavy items. Avoid overloading
electrical outlets or extension cords. Always disconnect the power cord from
the power outlet when installing, servicing, or not using the product for an
extended period of time. Do not block ventilation slots or fan exhaust on
product. Blocking airflow could damage product. Arrange product to allow air
to flow freely around product. For support please call
1-800-865-2112.
Symbols
WARNING
Do not overtighten screws.
Front of mount
Screws must get at least three full turns and fit snug.
Tools Needed for Assembly.
**** To properly tighten screws: Tighten until screw head makes contact, then tighten another 1/2 turn. Do not overtighten screws.
Parts (Before beginning, make sure you have all parts shown below).
Parts List Description| Qty| KOP55XHB-A
Part#| KOP55XHB-SA
Part#
---|---|---|---
A kiosk| 1| 10013495-BLK| 10013511-SLV
B 4mm allen wrench| 1| 560-9646| 560-9646
C cable tie| 12| 560-1756| 560-1756
D adhesive cable tie mount pad| 8| 600-1846| 600-1846
E display| 1| XHB554| XHB554
F M8 x 14mm screw| 8| 520-0168| 520-0168
G velcro strap| 1| 560-0931| 560-0931
H 6mm grommet| 1| 410-1088-R| 410-1088-R
I 5mm grommet| 1| 410-1089-R| 410-1089-R
J 8mm grommet| 1| 410-1090-R| 410-1090-R
K blank grommet| 3| 410-1091-R| 410-1091-R
L 4mm grommet| 1| 410-1097-R| 410-1097-R
M amplifier (not shown)| 1| 10015056| 10015056
Caution: Remove bolts to disengage kiosk from pallet before installing
product.
**WARNING
When installing Peerless mounts to threaded rods, the rods must be 1/2″
diameter minimum, 70 KSI tensile strength minimum. The hardware must be
installed and supported per the manufacturer’s design specifications. Use only
compatible hardware. Never exceed maximum load capacity of threaded rods or
their supporting surface. Consult a licensed and bonded professional engineer
for requirements in your area.
3-1
** Install using hardware specified leaving 1/2″ (13mm) minimum clearance from
supporting surface.
This page intentionally left blank.
7 Optional: IR Touch Overlay Accessory.
When optional IR touch overlay accessory is used:
Note: IR extender is included with displays and must be used to allow
remote control functionality.
Note: ACCD-ALS (ambient light sensor extender) is included with KIRP-
XHB4(-HT). ACCD-ALS overrides the display’s built-in ambient light sensor and
can be placed in a location that is more representative of the actual ambient
light conditions.
12-1 CAUTION
All spaces must be filled. Blank grommets must be used where no cable is
inserted.
CAUTION
Orient grommet using red edges. Red edges must join in the center. Failure to
follow these instructions can result in the product being damaged or
destroyed, voiding the warranty.
Warranty
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502, USA
[email protected]
800-865-2112
630-375-5100| Peerless-AV B.V.
Papendorpseweg 75
3528 BJ Utrecht
The Netherlands
+31 (0) 70 770 8037
---|---
Peerless-AV EMEA
Unit 2, Curo Park
Frogmore, St. Albans,
Hertfordshire, AL2 2DD
United Kingdom
+44 (0) 1923 200 100| Peerless-AV Latin America
Av. de las Industrias 413
Parque Industrial Escobedo
General Escobedo N.L.,
México 66062
+52 (81) 8384-8300
© 2023 Peerless Industries, Inc. Peerless-AV ® is a registered trademark of Peerless Industries, Inc. All rights reserved. Other parties’ marks are the property of their respective owners.
www.peerless-av.com/warranty
• www.peerless-av.com
• www.peerless-av.com/patents