SoundCore P20i True-Wireless Earbuds A3949 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore P20i True-Wireless Earbuds A3949
USER MANUAL
APP
Download the soundcore app to experience the full range of features such as gaming mode, Find Device, EQ tuning, firmware updates, and more.
If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.
WEARING
Choose the ear tips that fit your ears best.
CHARGING
1. Tear off the insulation sticker on the earbuds before first use.
2. Place the earbuds in the charging case and close it.
- Fully dry off the earbuds and the USB-C charging port before charging.
3. Connect the charging case to the power supply by using a certified USB-C charging cable.
- Fully charge both the earbuds and the charging case before the first use.
POWERING ON & PAIRING
Open the charging case and take the earbuds out of the case. They will automatically power on and enter Bluetooth pairing mode.
Select soundcore R50i / P20i / P25i * on your device’s Bluetooth list when connecting for the first time.
*The device name may vary depending on the region.
MANUAL PAIRING
To manually enter Bluetooth pairing mode, take the earbuds out of the case, then tap and hold the touchpads on both earbuds for 3 seconds.
CONTROLS
You can also customize controls in the soundcore app.
CONTROLS
POWERING OFF
To power off, return the earbuds to the charging case and close it.
The earbuds will automatically power off after 30 minutes if they are not
connected
RESET
Reset if the earbuds have issues pairing with each other or with other
devices.
Delete the pairing history from your Bluetooth device first. Take the earbuds
out of the case. Within one minute of the earbuds powering on, tap and hold
the touchpads on both earbuds for 10 seconds until you hear a notification
sound.
LED LIGHT GUIDE
FIRMWARE UPDATE
You will be informed once the new version of firmware is detected when you connect the earbuds with the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is completed. During the update, ensure the earbuds are being charged and avoid any usage.
SPECS
Specifications are subject to change without notice.
| Input | 5 V 0.43A |
|---|---|
| Rated output power | 5mW |
| Battery capacity | 60mAh × 2 (earbuds); 430mAh (charging case) |
| Charging time Up to | 2 hours |
| Playtime (varies by volume level and content) | Up to 10 hours (up to 30 hours |
with the charging case)
Driver unit| 10mm dynamic driver
Frequency response| 20Hz – 20kHz
Impedance| 16Ω
Waterproof level (Earbuds)| IPX5
Bluetooth version| 5.3
Bluetooth range| 10m / 33ft
Support Videos
How to Clean Your Headphones
DOWNLOAD
SoundCore P20i True-Wireless Earbuds A3949 User Manual – [Download PDF]
SoundCore P20i True-Wireless Earbuds A3949 Quick Start Guide- [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>