KMC CONTROLS BAC-12xxxx Sensors and Thermostats User Guide

KMC CONTROLS BAC-12xxxx Sensors and Thermostats

KMC Sensors and Thermostats

KMC Controls manufactures a variety of pneumatic, analog electronic, and digital sensors and thermostats. Some sense only one variable (e.g., temperature), while others sense multiple variables (e.g., humidity and CO2). “Sensors” are used in diverse HVAC and Building Automation System (BAS) applications and are closely related to several other types of devices:

• Sensors measure a physical characteristic of an environment and provide a signal corresponding to those properties. Sensors may be stand-alone or integrated within a control device (e.g., a thermostat).

• Transmitters are also sensors, but take a relatively small (and passive) sensor signal (e.g., the resistance of a thermistor in response to a temperature) and convert it into an active voltage (e.g., 0–5 VDC) or active current (e.g., 4–20 mA). Boosting the signal allows greater distance between the sensor and the controller.

• Transducers convert one kind of energy into another. The physics may be different, but they can function as sensors. In building automation, transducers may convert pressure into voltage or current (or vice versa) or voltage signals into current signals (or vice versa).

• In HVAC and BAS applications, many sensors, transmitters, and transducers perform essentially the same function, sensing a physical characteristic and providing a signal to an external control device. Thermostats, on the other hand, contain a sensor integrated with a control device. Thermostat technology ranges from simple bimetallic switches to sophisticated digital devices.

See also the Sensor and Thermostat Selection Fundamentals white paper. For details about the various models in this document, see the product data sheets and other documentation on the KMC Controls web site.

Thermostats (Integrated Room Temperature Sensor Plus Controller)

Advanced Application Controller; optional humidity, motion, and CO2 sen- sors; programmable| BAC-12xxxx, BAC-13xxxx, and BAC- 14xxxx FlexStat

FCU, HPU, RTU| Digital B-ASC| Color LCD| BACnet Application Specific Controller; optional humidity and motion sensors, configurable| BAC- 4xxx- CW000x AppStat

FCU and Baseboard Heating| Analog Electronic| LCD| Six-wire modular jack, single setpoint| CTE-5201-16

VAV, FCU, Base board Heating, and Chilled Beam| Analog Electronic| LCD| “Universal” analog electronic replacement, dual setpoint, two analog outputs| CTE-5202

VAV| Analog Electronic| Mechanical Indicator on Scale| Designed for use with CEE/CEP/CSE/CSP- 4xxx controller-actuators, single and dual setpoints (replaced by CTE-5202)| CTE- 100xand CTE- 110x

VAV| Analog Electronic| Mechanical Indicator on Scale| Designed for use with CSP-500x control- ler-actuators, single and dual setpoints (replaced by CTE-5202)| CTE-510x

VAV and FCU| Pneumatic| Mechanical Indicator on Scale| 1- and 2-pipe, DA and RA| CTC-16xx

Temperature  Sensors (Room)

1xxx](https://www.kmccontrols.com/product/KMD-1000-SERIES/) [NetSensor**](https://www.kmccontrols.com/product/KMD-1000-SERIES/)

Digital| LCD| For BAC-8xxx SimplyVAV controller-actuators| STE- 8xxx NetSensor

Digital| LCD| For BAC-59xx and BAC-9xxx controllers; optional humidi- ty, motion, and CO2 sensors| STE- 9xxx NetSensor

Thermistor, 10K, Type II and Transmitter| LCD or None| Thermistor only or active voltage option, override and setpoint adjustment options, screw terminals or modular jack connection| STE- 60xx

Thermistor, 10K, Type III| None| Flat wall plate with hidden thermistor| STE-1430

Analog Electronic Transmitter| None| Wall-mounted humidity transmitters with temperature sensors (thermistors)| THE-1102and  THE-1105|
Analog Electronic Transmitter| None| For use with CTE-110x/510x thermostats| TTE-1001|

Temperature Sensors (Other)

Analog Electronic (Thermistor)| None| Duct-mounted humidity transmitter with temperature sensor| THE-1002

Analog Electronic (Thermistor)| None| Duct flow sensor with temp. sensing (for REE-1005)| SSE-20xx

Analog Electronic (Thermistor)| None| Duct temperature transmitter for use with CEE-11xx remote thermostat controllers| TTE-2001

Humidity Sensors

1xxx](https://www.kmccontrols.com/product/KMD-1000-SERIES/) [NetSensor**](https://www.kmccontrols.com/product/KMD-1000-SERIES/)

Digital| LCD| For BAC-8xxx SimplyVAV controller-actuators| STE- 8xxx NetSensor

Digital| LCD| For BAC-59xx and BAC-9xxx controllers; optional humidi- ty, motion, and CO2 sensors| STE- 9xxx NetSensor

Analog Electronic (Thermistor)| None| Duct-mounted humidity transmitter with temperature sensor| THE-1002

Analog Electronic Transmitter| None| Compact wall-mounted humidity transmitter with temper- ature sensor (thermistor)| THE-1102| **
Analog Electronic Transmitter| None| Wall-mounted humidity transmitter with temperature sensor (thermistor)| [ THE-1105**](https://www.kmccontrols.com/product/THE-1105/)|

  CO, CO2, and Smoke Sensors

CAE-1103](https://www.kmccontrols.com/?s=CAE-1)

CO—Analog Elec- tronic| LCD| CO sensors, room and duct| SAE- 11xx

CO2—Analog Elec- tronic| LCD| CO2 sensors, room and duct| SAE- 10xx

CO2—Digital| LCD| Digital wall sensor for BAC-59xx and BAC-9xxx controllers| STE-9xxx NetSensor

Flow and Pressure Sensors and Pickup Tubes

SSE-1000/2000](https://www.kmccontrols.com/?s=SSE-)

Pneumatic (but used with electronic and digital controller)| None| Pickup tubes (also known as pitot tubes) for use with controllers that have flow and pressure sensors, or with a TPE-1475-2x pressure transducer wired to a controller| SSS-1xxx

Analog Electronic Transducer| None| Gauge pressure transducers (P-E/I)| TPE-1464-x

Analog Electronic Transducer| None| Low pressure transducers| TPE-1475-2x and TPE-1477-2x

Analog Electronic Transducer| None| Liquid differential pressure transducers (P-E/I)| TPE-1483-x

Miscellaneous

For convenience in installing a complete BAS, KMC Controls sells to our customers a large variety of Veris data servers, current transformers, monitors, meters, sensors, and accessories. For full Veris product descriptions and specifications, go to Veris.com and enter the part number in the Search field at the top of the page. See also the Veris catalog.

Digital/Electronic Handling Precautions

For digital and electronic sensors, thermostats, and controllers, take reasonable precautions to prevent electrostatic discharges to the devices when installing, servicing, or operating them. Discharge accumulated static electricity by touching one’s hand to a securely grounded object before working with each device.

Important Notices

The KMC logo and KMC Controls are registered trademarks of KMC Controls, Inc. Other products and name brands mentioned may be trademarks of their respective companies or organizations.
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of KMC Controls, Inc. The material in this document is for information purposes only. The contents and the product it describes are subject to change without notice. KMC Controls, Inc. makes no representations or warranties with respect to this document. In no event shall KMC Controls, Inc. be liable for any damages, direct or incidental, arising out of or related to the use of this document.

Support

Additional resources for product specifications, installation, configuration, application, operation, programming, upgrading and much more are available on the KMC Controls web site (www.kmccontrols.com). To see all available files, log-in to the KMC Partners site.

6© 2023 KMC Controls, Inc.
Specifications and design subject to change without notice AG151026D AG151026E

References

• KMC Controls | Building Automation and Control Solutions
• KMC Controls | Building Automation and Control Solutions
• Energy Sensors and Environmental Sensors | Veris
• CAE-1 | KMC Controls
• CTC-16 | KMC Controls
• CTE-10 | KMC Controls
• CTE-11 | KMC Controls
• CTE-510 | KMC Controls
• SAE-10 | KMC Controls
• SAE-11 | KMC Controls
• SSE- | KMC Controls
• SSE-20 | KMC Controls
• SSS-10 | KMC Controls
• ste-14 | KMC Controls
• veris | KMC Controls
• AppStat | KMC Controls
• FlexStat | KMC Controls
• SimplyVAV Series | KMC Controls
• Tstat: Single, DA, LCD, Modular | KMC Controls
• Tstat: Dual, Configurable, LCD, Almond | KMC Controls
• KMD-1000 Series NetSensors | KMC Controls
• Sensor: Room Temperature, Flat Plate, 10K Type III | KMC Controls
• STE-6000 Series Room Temperature Sensors/Transmitters | KMC Controls
• STE-9000 Series NetSensors | KMC Controls
• Products – KMC Controls
• Products – KMC Controls
• Products – KMC Controls
• Gauge Pressure Transducer, 0 to 10/20/50/100 psi | KMC Controls
• Low Pressure Transducer, –2 to +2″ or 0 to 2″ wc (–0.5 to +0.5 kPa or 0 to 0.5 kPa) w/ Probe | KMC Controls
• Sensor: Differential Pressure Transducer, 0 to 5/10/25/50 psi | KMC Controls
• Transmitter: Room, Blank Cover | KMC Controls
• Products – KMC Controls

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>