PELTOR FL5000 Series Headset Adaptors Instruction Manual
- June 13, 2024
- PELTOR
Table of Contents
PELTOR FL5000 Series Headset Adaptors
Product Information:
The Peltor Adapter is a high-flexibility device that allows you to use Peltor’s wide standard range of headsets without any further adaptations. It features a standard Peltor J11 chassis jack, making it easy to plug in and start talking. The adapter is designed to be sturdy, practical, and easy to use, with a PTT (Push-to-Talk) button that is conveniently placed for easy access with either hand. The button has a specific pressure point and a clear on/off indicator.
The Peltor Adapter is compatible with most modern communication radio and telephone systems on the market. It has contacts for connecting to a communication radio or telephone, and the outgoing wire is equipped with the necessary contact points. The adapter has undergone testing and approvals to ensure its quality and compliance with standards. It conforms to the CE requirements in the EU’s EMC directive 89/336/EEG and is EEX-approved according to SS-EN 50014 and EN50020 (EEX ib IIB T4). It is also sealed to IP 65 according to IEC 60529.
The adapter has a universal circuit board that can be rewired for various applications. The circuit board is coated for added durability. The materials used in the construction of the adapter include polypropylene and polyolefin- based TPE for the shell, and various types of cables with PUR casing and PTFE- insulated wires.
Product Usage Instructions
- Choose the appropriate Peltor headset for your needs.
- Ensure that the communication radio or telephone system you wish to connect to is compatible with the Peltor Adapter.
- Plug the Peltor Adapter into the communication device’s jack.
- Make sure the adapter is securely connected.
- If wearing gloves, use either hand to access the PTT button on the adapter for easy communication.
- To initiate communication, press the PTT button. The clear on/off indicator will help you determine the button’s status.
- Speak into the connected Peltor headset to communicate with the desired device.
- When finished, release the PTT button to end communication.
Note: For specific contact and cable length information, refer to the range of models provided in the user manual.
Peltor Adapter
FL5000 – for extreme environments
The FL5000 adapter series – alw
– Make yourself heard in the most extreme environments
The new Peltor FL5000 adapter series was developed by professionals for professionals. Close collaboration with demanding users and extensive testing in tough environments have convinced us that we have reached our goal – making communication in tough environments easier and safer. We know that our solutions work – on oil platforms in the North Sea, in damp mine shafts and at thundering airports.
High flexibility
The box has a standard Peltor J11 chassis jack. This lets you use Peltor’s
wide standard range of headsets without any further adaptations. Just plug in
and start talking. The outgoing wire has a contact for a communication radio
or telephone. Contacts are available for most modern communication radio and
telephone systems on the market.
Sturdy
The adapter is built into a functional, watertight, sturdy shell with no
protruding parts. The whole adapter, particularly the contact, is designed to
keep moisture away from the circuits. The adapter is sealed to IP65. All
external details are made of rust-proof materials. The cord has a flexible,
durable reinforcement where it connects to the box, and some types of adapters
have a cord with a very rugged copper alloy. The chassis jack and
reinforcements have been tested thoroughly to withstand being plugged in,
unplugged and bent at least 100,000 times.
Always close by – never in the way
The adapter is designed to fit the size and shape of the hand. On the back is
a sturdy clamp that can be used to attach the adapter to your clothing. The
clamp can be twisted 360º, making the adapter as easy and flexible as possible
to use in all situations without being in the way or snagging on anything. The
clamp can easily be removed if the adapter does not need to be fastened in
place.
The adapter also has a loop that can be used to fasten it in place when the
clamp is not used.
Practical and easy to use
The PTT button is logically placed so that it is easy to access with either
hand. The special design also makes it easy to use even with heavy gloves. The
PTT button has a specific pressure point with a clear on/off indicator.
The jack is at a 10º angle to the fixed cord and positioned so that the
headset is easy to plug in and unplug in all situations.
ways close by – never in the way
Testing and approvals
Conforms to the CE requirements in the EU’s EMC directive 89/336/EEG.
EEX-approved according to SS-EN 50014 and EN50020 (EEX ib IIB T4).
(The technical design is prepared for ATEX approval with approved headsets.)
Sealed to IP 65 according to IEC 60529.
Results of quality testing:
- Cable reinforcement: over 100,000 bends
- Contact: can be plugged in and unplugged over 100,000 times
- Field test: 1.5 m after 20 hours at –30ºC
- Operating temperature: min –30ºC for 20 hours, max +55ºC
- Storage temperature: max +55ºC
Technical data
- Max input voltage and current:
- EEX-approved adapter: max 10 V/450 mA
- Non-EEX-approved adapter: max 14 V/350 mA
- The adapter has a universal circuit board that can be rewired for various applications. The circuit board is coated.
- For contacts and cable lengths, see the range of models.
Material
- Shell: Polypropylene and polyolefin-based TPE
- Cable: LAL: 5-core cable with PUR casing and PTFE-insulated wires
- LAM: Screened 6-core cable with PUR casing and PTFE-insulated wires of a very durable copper alloy.
- LC: 6-core cable with PUR casing and PTFE-insulated wires
- LQ: 4-core cable with PUR casing and PTFE-insulated wires
- LR: Screened 6-core cable with PUR casing and PTFE-insulated wires
Accessories and spare parts
- TKFL01 cable clamp: Load-relieving clamp to attach the cord to the clothing.
- TKD5005 clamp: To attach the FL5000 adapter.
- FEO231 plastic screw: Screw for cover. Also serves as a stopper for the clamp.
- AL spare part cable: (see range of models)
Range of models
Model
| |
EEX- appr.
|
Cable type
|
Length
---|---|---|---|---
FL5001| Peltor standard|
–
|
LC
|
0,7-2,1
FL5002| Motorola HT600, HT800, MT1000|
ib IIB T4
|
LAM
|
0,6
FL5003| Dancall 6000, Tateco CTS900|
–
|
LQ
|
0,6
FL5005| Ericsson Freeset|
–
|
LQ
|
0,6
FL5006| Ground Mechanic|
–
|
LC
|
3,0-6,0
FL5007| Ground Mechanic|
–
|
LAL
|
1,5-6,5
FL5008| Ground mechanic|
–
|
LC
|
6,5
FL5009| Motorola MX300|
ib IIB T4
|
LAM
|
0,6
FL5010| Alinco, Icom, Yaesu, Zodiac|
–
|
LQ
|
0,6
FL5011| Dittel FSG4, FSG5|
ib IIB T4
|
LAM
|
0,6
FL5012| Motorola MX1000, MX2000, MX3000|
ib IIB T4
|
LAM
|
0,6
FL5013| Ascom SE-140|
–
|
LR
|
0,6
FL5014| Motorola GP300|
ib IIB T4
|
Motorola
|
FL5014| Radius P110|
–
|
Motorola
|
FL5016| Ericsson P50/500|
ib IIB T4
|
Ericsson
|
FL5017| Motorola Visar|
–
|
LQ
|
0,6
FL5018| Motorola HT1000, MT2000, GP900|
ib IIB T4
|
LAM
|
0,5-0,9
FL5019| Maxon slim line, Motorola Expo|
–
| |
0,6
FL5030| Motorola GP340|
–
|
LC
|
0,6
Peltor FL5000 Adapter
Some valuable characteristics
The PTT button is logically placed and specially designed to be easy to use even with heavy gloves.
The whole adapter, particularly the contact, is designed to keep moisture away from the circuits.
Connecting cables with contacts are available for most modern communication radio and telephone systems on the market.
- On the back is a sturdy clamp that can be twisted 360º, making the adapter as easy and flexible as possible to use in all situations.
- The adapter is built into a functional, watertight, sturdy shell with no protruding parts and is designed to fit the size and shape of a hand.
Peltor® is a registered trademark of Peltor AB. Member of BPS. © Peltor AB
2001
Peltor is always in the process of product development and we reserve the
right to implement changes in our product range without prior notice.
Peltor AB
Box 2341, 331 02 Värnamo, Sweden
Tel. +46 370-65 65 65, Fax +46 370-65 65 99
e-mail: [email protected]