LA CROSSE TECHNOLOGY 404-3828B 11 Inch Riverview Wall Clock Instruction Manual
- June 13, 2024
- LA CROSSE TECHNOLOGY
Table of Contents
404-3828B 11 Inch Riverview Wall Clock
11 – Inch Riverview
Wall Clock
Model: 404-3828B
DC: 083023
WARRANTY & SUPPORT
This product is warranted to be free from defects in material
and workmanship under normal use and service for a period
of two years from the date of sale to the customer. Warranty
will not apply to defects resulting from abuse, accidents, or
misuse. If a defect that is covered by this warranty arises
during the warranty period, promptly return the clock
(postage prepaid) with proof of purchase showing the date
the clock was purchased to the following address and such
defects will be repaired, or the products will be replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
For Online support visit:
www.lacrossetechnology.com/support
CA WARNING:
This product can expose you to chemicals including acrylonitrile,
butadiene, and styrene, which are known to the State of California
to cause cancer and birth defects or other reproductive harm. For
more information, go to:
www.P65Warnings.ca.gov
Made in China – Printed in China
SPECIFICATIONS
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the Battery
Compartment (Alkaline recommended)
Battery Life: 12 months
Movement style: Step
Dimensions: 1.75” W x 10.8” H (4.4 cm W x 27.43cm H)
CARE & MAINTENANCE
When batteries of different brand or type are used together, or new
and old batteries are used together, some batteries may be
over-discharged due to a difference of voltage or capacity. This
can result in venting, leakage, and rupture and may cause personal
injury.
-
Always purchase the correct size and grade of battery
most suitable for the intended use. -
Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of different
types. -
Clean the battery contacts and also those of the device
prior to battery installation. -
Ensure the batteries are installed correctly with regard to
polarity (+ and -). -
Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this product. -
Remove used batteries promptly.
-
For recycling and disposal of batteries, and to protect the
environment, please check the internet or your local phone
directory for local recycling centers and/or follow local government
regulations.
POWER UP
-
Insert 1 fresh AA alkaline battery, according to
polarity, into the Battery Compartment. -
Rotate the Time Set Wheel to set the time. 3. Mount
on a wall and enjoy!
Learn more from our video: bit.ly/wallclock_setup
Note: The quartz movement will keep the clock
running accurately. If the clock does not operate, or
steadily loses time, replace the battery.
MOUNTING
Use the Hanger Hole on the back to mount the clock.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>