anko 43307869 1.82m(6ft) Christmas Tree Instructions
- June 13, 2024
- Anko
Table of Contents
anko 43307869 1.82m(6ft) Christmas Tree
Product Information
Product Name: 1.82M(6FT) CHRISTMAS TREE KINGSTON PINE-TREE D
Product Code: 43307869
Contents:
- A: Tree Top
- B: Upper Body
- C: Lower Body
- D: Plastic Stand
Country of Origin: Made in China
Product Usage Instructions
- Slide the legs upwards into the slots at the base of the trunk until firmly secure.
- Insert Section B into Section C, then secure it into the stand.
- Insert Section A into Section B.
- Lower all main branches on the bottom level and position them so they are parallel to the floor. Shape them as desired.
- Straighten and separate all the small branches. Then, bend them slightly upward in a āVā shape to match the rest of the tree for a better result.
Warnings
- This product is for indoor use only.
- Keep the product away from fire and other heat sources.
- Recommend saving instructions for future reference.
Packaging Up and Storage Tips
- Remove all lights and ornaments from the tree.
- Remove sections as follows: Section A and Section B.
- Slide the legs down and remove them from the slots at the base of the tree trunk.
- Before placing each tree section in the carton, press the branches against the stem.
- Pack the carton and store it in a dry and damp-free area.
- Do not place the product in direct sunlight or in an area where temperatures exceed 40 degrees.
Contents
- A Tree Top
- B Upper Body
- C Lower Body
- D Plastic Stand
Instructions
- Slide legs upwards into slots at the base of the trunk until firmly secure.
- Insert Section B into Section C then secure into stand
- Insert Section A into Section B
- Lower all main branches on the bottom level and position so they are parallel to the floor, shape as desired.
- For a better result, straighten and separate all the small branches. Then, bend slightly upward in aāVā shape to match the rest of the tree.
Warnings:
- This product is for indoor use only.
- Keep product away from fire and other heat sources
- Recommend saving instructions for future reference.
Packaging Up and Storage Tips
- Remove all lights and ornaments.
- Remove sections as places, Section A and Section B.
- Slide legs down and remove from slots at the base of the tree truck.
- Each tree section, the branches should be pressed against the stem before placing in carton.
- Pack carton and store in a dry and damp free area.
- Do not place product in direct sunlight or in an area where temperatures exceed 40 degrees.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>