anko 2023-08-20 Solar Powered Christmas Santa Instructions
- June 13, 2024
- Anko
Table of Contents
anko 2023-08-20 Solar Powered Christmas Santa
Solar Powered Christmas Santa
Assembly Diagram
Instructions
- Assemble the metal support (D) onto the Santa as shown in the picture
- Assemble the solar panel as shown in the picture. A-Solar Panel B- Plastic Cylinder C-Plastic Spike
- Attach plastic cylinder (B) onto the back of the solar panel (A), then attach the plastic spike (C) to a plastic cylinder (B) by pressing firmly.
- Turn the OFF/ON switch to the “ON” position. You will only need to do this once, as the solar panel will turn the lights on and off automatically.
- Place the entire unit in a sunny position where there is soft ground to enable the spike to be pushed in easily
Specification
White LED
- 50x50mm Amorphous Solar Panel
- 1x AAA Ni-Cd rechargeable battery 1.2V, 300mAh
- Static function
IMPORTANT
- Charge the battery for at least 8 hours before first use.
- The solar light panel MUST be placed in a well-lit location for the brightness and lighting duration.
- Put the switch in the “OFF” position when not in use or in storage.
- Use a damp cloth to clean it when there is a buildup of dust and/or dirt on the surface of the solar panel.
Battery Replacement
The battery is non-replaceable. DO NOT attempt to replace it.
Bulb Changing
The light set is constructed with non-replaceable bulbs. DO NOT attempt to
replace any of the bulbs in the light set.
WARNING: FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.
Read User Manual Online (PDF format)
Loading......